Removed org verbatim emphasis around link descriptions.
Moved up a paragraph before the julia-mode-enable-lsp code snippet,
because it ended with "then install this layer with:".
Removed the link from the same paragraph, it linked to it's own section.
Loaded lsp-julia from melpa
And fixed#12852
spacemacs/go-setup-backend was incorrectly added to the hook:
julia-mode-local-vars-hook
The correct function is now added: spacemacs/julia-setup-lsp
correct a tick
The variable clojure-enable-linters can now be set to a list of linters:
'(clj-kondo joker)
or
'(joker squiggly)
or any other combination of the available linters.
In which case, all linters in the list will be active if they are
available to be. In that flycheck is configured so that each linter
in the list has as next-checker the next linter in the list.
The variable can also now be set to:
'joker
If only the newly added joker linter should be used.
This will pull down flycheck-joker and add Joker as a checker for
Clojure modes.
--
Implementation Details
The way it works is that for each Clojure linting mode, clj, cljc,
cljs and edn, a primary linter is chosen based on the order the
user specifies in clojure-enable-linters which support that mode.
It is made the primary linter for flycheck to use by being promoted
to the front of the flycheck-checkers list. All other linters specified
by the user which the mode also supports get added to it as a
next-checker.
Tested with clj-kondo, joker and squiggly. The only issue I saw was that
the way flycheck-clojure works, and the way I currently have setup the
logic for multiple checkers mean that we can't add to a mode multiple
checkers for the same linter. flycheck-clojure has eastwood, kibit and
core.typed. If you have it configured to use eastwood linter, then it
will all work, as eastwood gets added as the next-checker. But if you
have it disabled in flycheck-clojure, there won't be any
flycheck-clojure linters to activate. I'm not sure as of now how to best
support that. Ideally, we would not clubber linters into a single packge
like that, and so the layer would have instead of squiggly: eastwood,
kibit, core.typed. But that's not how flycheck-clojure works. Future
commit might be able to do something smarter about this.
The company-quickhelp package wasn't mentioned in the auto-completion readme.
And the variable name auto-completion-enable-help-tooltip that enables the
package doesn't mention the package name either (which is fine).
This just makes it somewhat easier to see/find that the company-quickhelp
package is related to tooltips and that it's part of the auto-completion layer.
Effectively, this forces `vterm` to spawn a shell set in a
`shell-default-term-shell` variable i/o default "/bin/bash" - just like
other shells from `shell-pop` do.
Conda layer needed some additions to be spacemacs
conform. In detail I did:
* Add missing features block and TOC declaration in README
* Change bindings to extent the existing python bindings
rather than adding new general bindings.
* Make conda layer require python layer
add auto-completion-enable-help-tooltip support
add auto-completion-use-company-box option and update document
add company-box config source url, remove empty line and join single line parenthesis
hide company-box mode line
update CHANGELOG.develop
hide doc popup when selection changed
add all-the-icon in auto-completion-packages
move icons config to auto-completion/init-all-the-icons according to duianto's advice
counsel-git find a file in the current git repository. "gff" is
currently bound to magit-find-file. While counsel-git seemingly performs the
same functionality as magit-find-file, they are substantially different:
magit-find-file is not intended to find a file, contrary to what the
name indicates. See https://github.com/magit/magit/issues/3967 for
explanation. This is why we need another key binding for counsel-git.
Delete integration code for git-link and git-timemachine, which is
superseded by upstream changes to git-link committed in August 2016:
433ba1dba7
* CHANGELOG.develop: Add an entry for this change.
* layers/+source-control/git/funcs.el (spacemacs/git-link-copy-url-only):
Replace call to spacemacs/git-link with a call to git-link.
(spacemacs/git-link-commit-copy-url-only): Replace call to
spacemacs/git-link-commit with a call to git-link-commit.
(spacemacs/git-link, spacemacs/git-link-commit): Delete functions.
* layers/+source-control/git/packages.el (git/init-git-link): Replace
binding to spacemacs/git-link with a binding to git-link.
counsel-more-chars was renamed to ivy-more-chars a year ago:
Move counsel-more-chars-alist and counsel-more-chars to ivy.el.
4461ef302a
with an alias to counsel-more-chars.
The alias was removed 2 days ago:
ivy.el: Clean up obsolete aliases
1a9002bf4b
Follow up the changes in the previous commit with some minor improvements
to formatting, grammar, spelling, and wording.
* layers/+distributions/spacemacs-docker/README.org: Replace "+" with
"and".
* layers/+email/mu4e/README.org: Use full sentences in the comments in the
mu4e-alert example.
* layers/+intl/japanese/README.org: Use verbatim markers for names of
files, functions, packages, and variables. Capitalize "Linux".
* layers/+os/osx/README.org: Capitalize "Emacs", "Vim", and "Evil".
* layers/+os/osx/config.el (osx-command-as, osx-use-dictionary-app):
* layers/+os/osx/keybindings.el (spacemacs/system-is-mac): Improve
docstrings.
* layers/+readers/dash/README.org: Capitalize "API", "Helm", and "Ivy".
* layers/+spacemacs/spacemacs-defaults/config.el
(delete-by-moving-to-trash): Use full sentences in comment.
* layers/+spacemacs/spacemacs-defaults/funcs.el
(spacemacs/toggle-frame-fullscreen-non-native): Improve docstrings.
* layers/+tools/shell/packages.el (shell/init-eshell-z): Replace use of
with-eval-after-load by using use-package's :after keyword to load eshell-z
when eshell is loaded.
Use a dynamic hint for the smerge transient state in order to show the
current and total numbers of conflicts, and make the full hint toggleable.
* CHANGELOG.develop: Add an entry for this change.
* layers/+source-control/version-control/config.el
(spacemacs--smerge-ts-full-hint-toggle): New variable.
* layers/+source-control/version-control/funcs.el
(spacemacs//smerge-ts-hint): New function. Return a string indicating the
index of the current conflict and the total number of conflicts detected by
smerge-mode. If spacemacs--smerge-ts-full-hint-toggle is true, append the
smerge transient state's full hint.
(spacemacs//smerge-ts-toggle-hint): Toggle showing the full hint for the
smerge transient state.
* layers/+source-control/version-control/packages.el
(version-control/init-smerge-mode): Define the transient state in :init so
we can use spacemacs|transient-state-format-hint. Use
spacemacs//smerge-ts-hint to display a dynamic hint. Bind the ? key to
spacemacs//smerge-ts-toggle-hint.
Instead of using a single variable for all transient states' full-hint
toggle functions, define a unique variable for each toggle function so that
toggling the full hint for one transient state does not affect the others.
* CHANGELOG.develop: Add an entry for this change.
* layers/+spacemacs/spacemacs-defaults/keybindings.el
(spacemacs--window-manipulation-ts-full-hint-toggle): New variable.
(spacemacs//window-manipulation-ts-toggle-hint)
(spacemacs//window-manipulation-ts-hint): Replace
spacemacs--ts-full-hint-toggle with
spacemacs--window-manipulation-ts-full-hint-toggle.
* layers/+spacemacs/spacemacs-layouts/config.el
(spacemacs--ts-full-hint-toggle): Delete variable.
(spacemacs--layouts-ts-full-hint-toggle)
(spacemacs--workspaces-ts-full-hint-toggle): New variables.
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs//layouts-ts-toggle-hint, spacemacs//layouts-ts-hint): Replace
spacemacs--ts-full-hint-toggle with spacemacs--layouts-ts-full-hint-toggle.
(spacemacs//workspaces-ts-toggle-hint, spacemacs//workspaces-ts-hint):
Replace spacemacs--ts-full-hint-toggle with
spacemacs--workspaces-ts-full-hint-toggle.
Use nil and t instead of 0 and 1 for spacemacs--ts-full-hint values.
* layers/+spacemacs/spacemacs-layouts/config.el
(spacemacs--ts-full-hint-toggle): Define with an initial value of nil.
* layers/+spacemacs/spacemacs-defaults/keybindings.el
(spacemacs//window-manipulation-ts-toggle-hint)
(spacemacs//window-manipulation-ts-hint):
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs//layouts-ts-toggle-hint, spacemacs//layouts-ts-hint)
(spacemacs//workspaces-ts-toggle-hint, spacemacs//workspaces-ts-hint):
Replace (logxor ... 1) and (equal 1 ...) with (not ...) and a simple truth
check.
The react layer relies on the javascript layer and uses multiple values
from it including definition of a formatter. However, the react layer
does not respect the javascript layer setting for formatting a file on
save.
This patch configures the react layer to add a before save hook that
calls the javascript layer formatting function when the
'javascript-fmt-on-save variable is enabled.
Context:
When using org files, one normally tends to add Github code links to an
algorithm/bug explanation so that readers are able to follow along with a PR
change.
The current `<SPC> g l L` command gets us the URL to the current branch; given
the code is in flux, the link becomes non-sensical rather quickly, loosing value
when trying to build a document with explanations about the code.
This PR allows us to get the Permalink (e.g. link associated to the commit, not
the branch); using this, the URL contents will never change with new commits
submitted to the repository.
Changes:
* Add two new functions with associated keybindings:
- `<SPC> g l p` maps to `spacemacs/git-permalink`
- `<SPC> g l P` maps to `spacemacs/git-permalink-copy-url-only`
* The above changes rely on mechanisms of `git-link`, so no new code needs to
be introduced
There was a edge case with the declaration of the `lsp` layer in `layers.el`
files.
The `hy` layer depends on the `python` layer which in turn depends on the `lsp`
layer if and only if the `python-backend` layer variable is set to `lsp`.
When the `hy` layer was declared first then it declares the `python` layer
without its layer variables, thus the `lsp` layer was not declared because the
`python-backend` variable was not set.
The fix is to gather all the layer dependencies and resolve them only after all
the used layers have been declared.
* new function `configuration-layer/declare-layer-dependencies`
* replace all calls to `configuration-layer/declare-layer` by the new function
except for distribution layers (we declare layer dependencies right away in
distribution layers)
* use local-vars-hook coupled to setup function for dap
* define new private layer variable `spacemacs--dap-supported-modes` to
configure key bindings. This allows to move the key bindings definition from
`funcs.el` to `packages.el`
* remove duplication of DAP key bindings in READMEs by pointing to the dap layer
documentation
* alphabetically sort package configuration
The dart layer requires the official LSP server as the
emacs mode alternative is not longer properly maintained.
Therefore I have added some more description of how to
install the server properly and let the layer load
the LSP layer automatically.
In addition I have removed the unsupported variable
`dart-server-enable-analysis-server` from the
documentation.
See https://github.com/bradyt/dart-mode/wiki/LSP for
details.
While getting the dart-server major mode key bindings to work.
Everything was moved from the `dart/init-dart-mode` function,
to the `dart/init-dart-server` function.
This revealed that an empty `dart/init-dart-mode` section causes
`M-x revert-buffer`
to switch the dart buffer to `fundamental-mode`.
The fix was to load `dart-mode` from the `dart/init-dart-mode`
function. And add `:after dart-mode` to the
`dart/init-dart-server` function.
dart-mode has been split into two packages:
- dart-mode, Provides basic syntax highlighting and indentation.
- dart-server, Factors out the features from dart-mode.el that relied on
external executables, thus improving availability, reliability, testing and
development of dart-mode.el.
When send form/region/buffer to repl without focus - repl buffer is
not scrolling and result not visible.
Added scrolling to the end of the repl-buffer after eval.
Additional path names are now detected.
However, the patterns have also been anchored more tightly, meaning they
are more accurate, so they will match less slop (this may affect certain
edge cases where people unknowingly depended on false-positives, e.g.,
`parasite.yml').
Technical details about regexp changes:
* Remove unnecessary `.*' at beginning
* Anchor file names with leading `/' to prevent partial matches
- (eg., don't match `not-main.yml')
* Restructure capture groups so that `\\.yml' extension is at very end
* Support `.yaml' extensions as well
* Anchor the very end with `$'
On systems where IPython executable path contains whitespace
(e.g, if IPython is under Local Appdata and your Windows username has
whitespace), the shell command was invalid, quoting the executable is required.
"pu" for lsp backends called a lsp-java function which has
been deactivated in the `lsp-java` package. Replaced it with
the closest match from the same package, updating the
project settings instead.
Fix issue #12168 by documenting that the SPC u SPC a o j j key binding can
be used to open today's journal without adding a new entry.
* layers/+emacs/org/README.org: Add key binding.
It applies to the editing styles:
- hybrid with the variable hybrid-style-enable-hjkl-bindings set to t
- vim
Moved the default key binding for ivy-switch-buffer-kill:
From: C-k
To: C-M-k
Thanks for the suggestion: asok
Moved dependency checks from the init functions to
the package initialisation.
Added documentation for the new `elfeed-enable-goodies`
variable and changed the default to `t`.
- declare lsp layer dependency if elixir-backind is lsp
- "C-j" now properly indents line
- add toggle breakpoint for elixir-mode
update CHANGELOG.develop
Remove empty lines:
- Two in the Layouts Transients State.
- Three in the Workspaces Transient State.
In the Layouts Transient State:
Move the navigation keys:
[n/C-l] next layout
[N/p/C-h] prev layout
closer to the top, to match the order in the Workspaces Transient State.
Change to a more generic description, without mentioning the other
completion name.
From: [l] layout w/helm/ivy
To: [l] another layout
Shorten the descriptions:
From: [w] workspaces transient state
To: [w] workspaces TS
and
From: [t] show a buffer without adding it to current layout
To: [t] show buffer w/o adding to layout
Indicate what's being added:
From: [A] add all from layout
To: [A] add all buffers from layout
In the Workspaces Transient State:
Rename "create" to "clone, because it's more descriptive and the
docstring for the variable "eyebrowse-new-workspace" says:
"nil: Clone last workspace."
From: [c/C] create workspace
To: [c/C] clone workspace
Add "TS" to the description to indicate that it switches to the Layouts
Transient State and then it will match "workspaces TS" in the Layouts
Transient State.
From: [l] layouts
To: [l] layouts TS
Instead of sorting "[l] layouts TS" alphabetically by it's key letter,
move it to the bottom of the "Go to" column. This has two benefits:
- The workspaces navigation keys are grouped together, without having
"[l] layouts TS" in the middle.
- And "[l] layouts TS" will be the last entry in the "Go to" column.
This matches the location of "[w] workspaces TS" in the Layouts
Transient State.
Change to a more generic description, without mentioning the other
completion name.
From: [w] workspace w/helm/ivy
To: [w] another workspace
- Consolidate pre-requisites
- Revise document structure
- Clarify setup instructions
- Link key bindings to their supporting tools
- Remove ancient notes on go-oracle
- Fix typos
- Style fixes
- Apply suggestions from code review by @duianto
Thanks to @duianto for the comprehensive review!
Co-Authored-By: duianto <otnaiud@gmail.com>
Updated the Workspaces Transient State "SPC l w".
Added a new key: "[s/S] single win workspace" to the Actions column.
It creates a new workspace with a single window, that shows the
Spacemacs home buffer.
Moved the existing key: "[c/C] create workspace" to the Actions column.
The `\` backslash before `.yml` in the regex has an orange (warning)
color and describe-char says:
There are text properties here:
face (font-lock-warning-face font-lock-string-face)
fontified nil
help-echo "This \\ has no effect"
Thanks smile13241324 for pointing out that double backslash escapes
a . (period).
lsp-mode had renamed lsp-shutdown-workspace and lsp-restart-workspace.
Added bindings for the following newer interactive lsp-mode functions:
- lsp-organize-imports
- lsp-document-highlight
- lsp-lens-show
- lsp-lens-hide
- lsp-treemacs-symbols
Declared new major mode prefixes (a: code actions, x: text/code).
Moved execute-code-action binding under new `a` prefix.
Also disabled helm-lsp keybindings when ivy layer in use.
gometalinter¹ was deprecated on 2019-02-28, in favor of the more advanced
golangci-lint.
. Drop references to gometalinter from README.org
. Update reference to available meta-linter (golangci-lint) in LAYERS.org
. Add attribution in CHANGELOG.develop
¹: https://github.com/alecthomas/gometalinter
Previously, if a user set `python-backend` to `'lsp`, it would not do anything
unless the user also manually added the `lsp` layer to the spacemacs `init.el`
file. This commit updates the `python` layer to correctly add the dependency
when needed, like the `c-c++` layer does.
Add emphasis to mentions of `mu` and `mu4e`.
Fix typo in a link description.
Add a missing key binding emphasis.
Change markdown surrounding backticks to org verbatim equal signs.
Enhancement to Clojure layer documentation for the clj-kondo linter added via
pul request #12611
Moved instructions to install section as clj-kondo and squiqgly can be added as
Clojure layer variables, just like clj-refactor and sayid.
Changed the install instructions to make them specific and to use clojure layer
variables, which is consistent with other Clojure layer options.
Elaborated on the install instructions to clarify requirements, constraints and
recommended linting tool.
Added credits to the changelog.
`spacemacs/python-format-buffer` was bound to '='.
Subsequently clobbered by lsp layer declaration of '=' as prefix with subsidiary
keybindings.
Resolved by moving `spacemacs/python-format-buffer` binding to '=='.
Updated README accordingly.
Opportunistically added 'mspyls' dir to .gitignore
Update 'spacemacs|create-align-repeat-x macro to add a docstring to created
functions. The docstring refers the user to the macro, providing a link to
the source code.
helm-xref currently provides two functions and the user is expected
to use the correct one based on their emacs version. The lazy loading
logic has to be updated to set the correct xref-show-xrefs-function.
As mentioned in https://github.com/syl20bnr/spacemacs/issues/10779#issuecomment-427712967,
emacs 26.1 changed the default behavior for term-char-mode to prevent cursor
movement. This change restores consistent behavior on all versions of emacs and
allows normal-mode motions to work again.
Note that the buffer is still read-only while in normal-mode, so operators that
change the line (such as `C`, `D`, `S`) still don't work.
Fixes#10956Fixes#10779
As winner-mode was moved from init.el to dump-init.el winner-mode
was not longer properly started for non-dumped emacs sessions.
Having winner-mode auto activate at startup did fix the issue
for non-dumping users but in turn broke the dumping process.
I have now moved the necessary winner-mode init to
spacemacs/setup-startup-hook which is only called
in the non-dumping case. To allow customizations I activate
winner-mode prior to loading user-init this will allow users
to deactivate winner-mode in the dotfile and fix ediff themselves
if this is wished for.
- Added a changelog.develop entry to the various documentation changes section.
- Fixed a typo.
- Improved some of the wording.
- Mentioned that save or discard leaves helm-ag-edit not just iedit state.
Lazy loading of `winner-mode` breaks `ediff` and
`winner-undo`. As a hotfix I have deactivated
lazy loading for that package for now.
Just activating `winner-mode` after `winner-undo`
or `winner-redo` has been called does not solve
the issues described in #12582.
Guard :requires against ivy not projectile. projectile is already owned by
buil-in spacemacs-project layer, so it's always t.
This prevents install of ivy, counsel, swiper and counsel-projectile
packages regardless of helm layer
this PR does two things for js-related layers:
(i) add option to disable lsp linter
javascript-lsp-linter for javascript and react layers
typescript-lsp-linter for typescript layer
when the value is t, lsp linter will be used in the layer
when nil, let flycheck pick up the best linters available such
as eslint
(ii) when syntax-checking(flycheck) layer is installed, then set
next-error-function value in react and javascript layers to nil, so that
spacemacs next-error, previous-error work A desciption of this issue can be
found at https://github.com/syl20bnr/spacemacs/issues/8078
Co-Authored-By: duianto <otnaiud@gmail.com>
problem:
Canceling "spacemacs/ace-buffer-links" with "C-g" showed the error message:
"goto-char: Wrong type argument: number-or-marker-p, t"
solution:
Only go to and press the link if it's a position (number).
Thanks sdwolfz for the suggestion to add underscore to the transient states,
then the shift key doesn't have to be released if it was held down to press `+`.
Added key bindings:
Evil numbers:
`SPC n _` decrease number under point
in the transient state:
`j` decrease number under point
`k` increase number under point
`SPC T T _` decrease transparency
`SPC z x _` scale down font
`SPC z f _` zoom out frame
Update documentation:
Zoom frame:
`q` quit transient state
Evil numbers:
`SPC n =` increase number under point
`SPC n _` decrease number under point
`0..9` add a number prefix argument
`q` quit transient state
Fixed a typo and made a small rewrite of the tip about using a prefix argument.
Added keys to transient states:
Font scaling:
Added `_` scale down
Reordered `k` assignment to match the order in the transient state
Frame transparency:
Added `_` decrease
Reordered `k` assignment to match the order in the transient state
Evil numbers:
Added `k` increase
Added `_` and `j` decrease
Zoom frame:
Added `_` zoom frame out
Reordered `k` assignment to match the order in the transient state
Which-key entries for Evil numbers `SPC n`:
Group together keys that call the same command:
From: + and =
To: +,=
From: - and _
To: -,_
Update the existing `SPC m g g` keybinding to use the command
`spacemacs/clj-find-var`. This makes finding a function definition a much
better experience as you dont have to have the REPL running to find a
definition, but when it is you can use a CIDER specific function.
`spacemacs/clj-find-var` is a wrapper that calls `cider-find-var` if the REPL is
running, otherwise it uses `dump-jump-go`.
Wrapper added in #9792
Latest CIDER release uses the following commands for starting the REPL from
within Emacs
`cider-jack-in-clj` to start a Clojure REPL
`cider-jack-in-clj&cljs` to start a Clojure and ClojureScript REPL
`cider-jack-in-cljs` to start a ClojureScript repl
The older aliases are deprecated and are being removed in the latest beta
release of CIDER
`cider-jack-in`
`cider-jack-in-clojurescript`
Keybindings for these jack-in commands have been updated and as there are three
options they have been moved under the repl > jack-in
The top level of the Clojure mode menu has the existing keybindings updated to
use the new commands. A third top-level keybinding `&` has been added for
`cider-jack-in-clj&cljs`
Although the Clojure repl utils (clojure.repl) are including in the user
namespace in Clojure projects, they are not available in your application
namespace.
The existing CIDER function cider-repl-require-repl-utils adds the Clojure
repl utils into the current namespace, so you can use functions such as doc
and source.
This is often a source of confusion for those new to Clojure / CIDER.
Although the Clojure repl utils (clojure.repl) are including in the user
namespace in Clojure projects, they are not available in your application
namespace.
The existing CIDER function cider-repl-require-repl-utils adds the Clojure
repl utils into the current namespace, so you can use functions such as doc
and source.
This is often a source of confusion for those new to Clojure / CIDER.
add an internal variable for `lsp` layer `lsp-layer--active-mode-list`
to keep track of active major modes using lsp,
`spacemacs//lsp-declare-prefixes-for-mode` will check this variable
to decide whether to add prefix to which-key or not
`SPC h T e` for `emacs-tutorial` (aliased from `help-with-tutorial` for a more
descriptive name)
`SPC h T v` for `evil-tutor-start`
Added a wikipedia link to the `vi` article, where the origins of modal editing
is discussed.
In the upstream dash-docs and helm-dash documentation, they suggest a workflow
where users leave relatively little in `dash-common-docsets`, and instead add
per-mode hooks to enable specific docsets, since a user is unlikely to want
Python documentation while in a C++ buffer and vice versa. Currently, the
spacemacs dash layer will automatically discover all installed docsets and add
them to `dash-common-docsets`.
This commit adds a config option `dash-autoload-common-docsets` that can be set
to nil to skip the auto-loading and allow users to opt-in.
Co-Authored-By: duianto <otnaiud@gmail.com>
Emacs 26 added built-in support for line numbers, relative line numbers, and
visual line numbers. Spacemacs supports only absolute and relative, but there is
no way to access the visual mode. It's hard to get around this, since Spacemacs
abstracts line numbers to a reasonably high degree.
Arguably, `visual` is much more useful than `relative` as a display type. Visual
line numbers are like relative line numbers, but only lines that are actually
showing are counted. This means:
1. Hidden lines are not counted. If a large amount of text is folded, the line
numbers won't jump from "10" to "546". This is particularly useful in
buffers like `magit-status`, where a large amount of information is folded
by default.
2. Lines that are wrapped are counted as multiple lines, since they're being
displayed as multiple lines in the editor. Each visual line will be
numbered - unlike `relative`, where the entire thing is numbered... Once.
With standard relative line numbers, you can't actually navigate using the line
numbers in the sidebar as soon as folded or wrapped lines are introduced. Since
this is one of the main use cases for relative line numbers, this is a big
problem.
Visual mode fixes that problem. Every line that's being displayed is labelled.
Numbers always correspond to the actual number of lines you'd need to navigate
to reach that line.
This commit extends Spacemacs' line number interface to provide visual line
number support.
* It's now agda2-auto-maybe-all. If you are not currently in a hole
it tries to `auto` all holes by default.
* Find and set an agda-version variable, to keep compatibility with
previous agda versions.
Revealed already bound navigation keys:
- `g` go to first candidate
- `G` go to last candidate
Moved `[q] quit` from bottom left to bottom right, to match other TSs.
Reduced spacing between keys and descriptions from two to one space.
This moves the point and content of the window close to where you were
before you ran perltidy. Of course if perltidy adds or removes a
significant amount of characters / lines as part of tidying, the point
will be moved by that amount. However in practice this I've found this
to be close enough.
Fixed the minibuffer showing: `nil`
when `select-enable-clipboard` is `nil` and the current files
path/dir/file/line/column/etc. is copied with the keys under
the prefix: `SPC f y`
New var: dotspacemacs-new-empty-buffer-major-mode
Set to a symbol naming a mode (e.g. 'text-mode) to apply that major mode to any
buffers newly created in Spacemacs by spacemacs/new-empty-buffer.
Fixes#12382.
* jsdeliver url format changed from `<project>/<version>/file` to `npm/<project>@<version>/<file>` sometime in 2017.
The old urls still work, but they aren't getting updated.
* The current reveal.js version is 3.8.0
current CDN version: https://cdn.jsdelivr.net/npm/reveal.js@3.8.0
A space was added before the open parenthesis containing chinese characters, in
the section titles.
This solves a convention issue in the table of contents links (that are
generated from the titles), where the latin and chinese characters were next to
each other without a separating space.
When the space is added, then the generated links change the space to a dash.
A space was also added before any open parenthesis (with chinese characters) in
the non title text.
And a single full-width close parenthesis was changed to the half-width version
to match the other close parenthesis.
Thanks AmaiKinono for pointing out the issue.
Interrupt longer running evaluations without having to kill or reset the REPL
connection.
Placed in the evaluate section, as it is specific to the currently running
evaluation.
Added new key bindings:
- In the Buffer column:
Added "g" and "G":
[</g] beg
[>/G] end
- In a new Other column:
[q] quit
Reordered the columns:
From: Large to small: buffer, full page, half page, line/column
To: Small to large: line/column, half page, full page, buffer
Reason: The most used (first listed) bindings are probably not scroll to the
"beginning" or "end" of the buffer.
Rearranged the half page columns two instances of "down/up" to one "down" and
one "up".
Reduced the TS width:
- Separated the line/column and full page keys to one "down" and one "up", and
the buffer keys to one "beginning" and one "end".
- Renamed "beginning" to "beg".
Reordered the key bindings (TS) logically: "up" above "down".
Reordered the key bindings (code):
Arranged them in the same order as the columns in the TS.
Add a keybinding to provide a simple way to correct the spelling of a word at
the current point. This enables fixing the spelling mistake as it happens with
low ceremony.
This change fixes a syntax mistake in the use-package declaration of
ruby-test-mode that causes the package to be loaded immediately, instead of
deferring the load until the first ruby file is visited, as is intended.
Make fcitx.el work by default, it was not configured properly.
Added a layer variable to decide if dbus should be used or not:
chinese-fcitx-use-dbus
(default: nil)
Corrected README.org:
It's the dbus interface (not fcitx-remote) that is needed for linux.
Add relevant keybindings and documentation, including a setting
`js2-include-node-externs` as a configuration variable for those that intend to
use `Spacemacs` for node projects, as it currently seems to be mostly aimed at
pure JS (https://github.com/syl20bnr/spacemacs/issues/483).
When trying to complete a path at the `:e ` evil-ex-completion prompt by
pressing `TAB`.
Before: The default Emacs `*Completions*` buffer opens.
After: The `HELM Completion At Point` buffer opens.
And sorted the transient hooks alphabetically.
<<26/04/2019>>
Incorporated feedback from robbyoconnor and yyoncho.
Rebased.
<<08/04/2019>>
Rebased on develop tip
<<17/04/2019>>
Rebased
<<02/06/2019>>
Rebased. Incorporated feedback from duianto.
The key binding was changed in this commit:
javascript: change key binding for repl live eval toggle
8bc9060af8
This updates the documentation.
From: SPC m s a
To: SPC m T l
When counsel-dash is installed, but helm-dash isn't, startup error
(void-function dash-docs-installed-docsets) will be triggered.
Since common functionality of both counsel-dash and helm-dash was refactored
into dash-docs, a standalone package, the layer code was updated to use the
variables and functions from that package. This also fixed the mentioned error.
Currently, when a terminal is ended, its window is also closed. This behavior is
not satisfying to all. Thus a layer variable is added to give an option whether
to close window with terminal.
Problem:
`C-x w 0` calls `winum-select-window-0-or-10` which shows:
winum-select-window-by-number: No window numbered 10
Solution (Thanks Miciah):
Remap `winum-select-window-0-or-10` to the current filetree command:
`neotree-show` or `treemacs-select-window`
Then all three key bindings:
`C-x w 0`, `SPC 0` and `M-0` will call the same filetree command.
Additionally:
Renamed the remapped which-key name to the filetree command.
Wrapped lines to keep them under 80 chars.
This change will make buffers with the motion state
(e.g., spacemacs home buffer) be able to use the
evil-unimpaired navigation key bindings.
Note that the normal state will inherit the motion
state map anyway, so there's no need to set the
normal state map separately.
It is nicer when user can stay in the "home row" for basic operations like
zooming in and out
Font Scaling Transient State
`k` scale up
`j` scale down
Frame Transparency Transient State
`k` increase transparency
`j` decrease transparency
Zoom Frame Transient State
`k` zoom frame in
`j` zoom frame out
Added two additional Zoom Frame TS keys:
`m` max frame
`f` fullscreen
When writing documents in latex or any markup language there is soon or later
going to be unrecognized words that get falsely flagged as incorrect. These
functions and key-bindings allows the user to add unrecognized words to the
dictionary so they are recognized as correctly spelled words by ispell/flyspell.
This seem's like a must have feature for any application that does any kind of
spell checking.
Added key bindings:
SPC S a b for Add word to dict (buffer)
SPC S a g for Add word to dict (global)
SPC S a s for Add word to dict (session)
Spell Checking Transient State:
SPC S . B for Add word to dict (buffer)
SPC S . G for Add word to dict (global)
SPC S . S for Add word to dict (session)
Delete the hook that commit 9fcf8c898d added
to persp-created-functions, and change spacemacs/ivy-spacemacs-layouts,
spacemacs/helm-perspectives, spacemacs/helm-persp-switch-project, and
spacemacs/ivy-persp-switch-project to achieve the intended goal of adding
the desired buffers after creating a new perspective.
Change spacemacs/helm-persp-switch-project and
spacemacs/ivy-persp-switch-project as follows: If the user selects a
project but then quits without selecting a file or buffer, the new
perspective is now immediately killed. Otherwise, if the perspective did
not already exist, any buffers that belong to the selected project are
added to the perspective.
Add the following actions to spacemacs/ivy-spacemacs-layouts and
spacemacs/helm-perspectives:
* Create a new perspective with the Spacemacs home buffer (default action).
* Create a new perspective with the buffers that belong to the current
buffer's project.
* Create a new perspective with the buffers that belong to the current
perspective (i.e., make a copy of the current perspective).
This commit resolves the problem reported in
9fcf8c898d (commitcomment-33343455).
This commit also fixes a problem with the default action for
spacemacs/ivy-spacemacs-layouts and spacemacs/helm-perspectives. According to
commit 7b931a9f5b, the default action is supposed
to display the home buffer if the action creates a new perspective, which was
determined by checking whether the perspective was missing from the list of
perspectives _before_ switching. However, commit
eb7ca651fe changed this logic so it was checking
whether the perspective was missing from the list of perspectives _after_
switching. This commit restores the correct logic.
* CHANGELOG.develop: Update.
* layers/+completion/ivy/funcs.el (spacemacs/ivy-spacemacs-layouts): Add
"Copy Current Layout" and "Create Project Layout" actions to the docstring.
Use spacemacs//create-persp-with-home-buffer for the default action.
* layers/+completion/ivy/packages.el (ivy/post-init-persp-mode): Add
actions for spacemacs//create-persp-with-current-project-buffers and
persp-copy.
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs||switch-layout): New macro. Switch to the named perspective,
and initialize it using the provided forms if the perspective is new.
(spacemacs//create-persp-with-current-project-buffers): New function.
Create a new perspective with the current project's buffers.
(spacemacs||switch-project-persp): New macro. Switch to the named
perspective, and evaluate the provided forms with
projectile-after-switch-project-hook bound with a hook that adds the
current project's buffers to the perspective. If the user quits during the
evaluation of the forms, kill the perspective.
(spacemacs//create-persp-with-home-buffer): New function. Switch to the
named perspective, and go to the Spacemacs home buffer if the perspective
is new.
(spacemacs/helm-perspectives): Use spacemacs//create-persp-with-home-buffer
for the default action. Add actions for
spacemacs//create-persp-with-current-project-buffers and persp-copy.
(spacemacs//helm-persp-switch-project-action): New function. Switch to the
named perspective and call projectile-switch-project-by-name, using the new
spacemacs||switch-project-persp macro. Bind helm-quit-hook with a hook
that kills the new perspective if the user quits
projectile-switch-project-by-name.
(spacemacs/helm-persp-switch-project): Use
spacemacs//helm-persp-switch-project-action.
(spacemacs//ivy-persp-switch-project-action): New function. Switch to the
named perspective and call counsel-projectile-switch-project-action with a
hook to add the project's buffers to the new perspective.
(spacemacs/ivy-persp-switch-project): Delete advice for
counsel-projectile-switch-project-action. Use
spacemacs//ivy-persp-switch-project-action instead.
(spacemacs//add-project-buffers-to-persp): Deleted.
* layers/+spacemacs/spacemacs-layouts/packages.el
(spacemacs-layouts/init-persp-mode): Don't add a hook to
persp-created-functions.
Dune is a popular build-tool for OCaml projects, the `dune` package adds:
- Adds syntax highlighting
- Template insertion
- Some testing/compilation functions
global-hl-todo-mode uses function to activate only for modes that are in the
activate list but are not org-mode.
Reference: 24b9925b1b/hl-todo.el (L185-L188)
Adds a comment re `hl-todo-activate-in-modes` var
As documented upstream [1], the `org-agenda-show-clocking-issues` view can be
used to show overlapping clocks, gaps, etc. on the agenda, and is bound by
default to `v c`. This commit adds a keybinding it in the org-agenda transient mode.
This may not be the best place for it, because it isn't a proper toggle;
upstream says to clear the issues flags by toggling logbook mode itself and does
not provide a clocking issues toggle directly.
[1] https://orgmode.org/manual/Agenda-commands.html#Agenda-commands
These changes adjust the `hy-mode` key-map and make use of `use-package`'s
`:mode` and `:interpreter` settings.
Regarding key-maps, the REPL prefix `s` has been added alongside `e`, since `s`
seems at least as conventional among layers as `e`. Although `e` is used for
Elisp and Clojure, it isn't used for Python or Racket. Scheme appears to use
both, so there's some precedence for the approach used here.
helm-swoop cannot detect the buffer has changed when calling git checkout to
change the file content, so helm-swoop won't clear the cache, we have to clear
the cache manually by evaluating `helm-swoop--clear-cache`. As it is
inconvenient, so I introduce a new key binding to to this.
Signed-off-by: Yang Qian <yang.qian@citrix.com>
Recent versions of `dumb-jump` have support for jumping to definitions for generic SQL buffers, and
support in Spacemacs requires that we enable these in the `sql` layer.
Two `SPC h SPC` toggles were missing their documentation:
- Nameless
- Minibuffer System Monitor (the symon package)
Now they match the other entries by showing:
- current state
- name (this was only shown before)
- documentation
- key binding (only minibuffer-system-monitor shows a key binding)
The nameless key binding `SPC m T n` only works in emacs-lisp-mode. It's key
binding might need to be described another way.
Defines a transient state for symbol-overlay, and bind it to ~SPC s o~ and ~SPC s O~.
Updates:
* update due to the signature change of `symbol-overlay-get-list`.
* align the docstring using `^^` and add `quit` button.
Using the `spell-checking` layer mini-mode `Space S .` would cause an error
```
Wrong type argument: commandp -- flyspell-correct-previous-word-generic
```
According to the [README](https://github.com/d12frosted/flyspell-correct#deprecations-in-v05), it has since moved the command to a new name, which is not available anymore.
This commit changes the command used to point to the new name to make the transient mode work again.
I have introduced a bug by merging
efa04de617.
This change removes the symptom with the
cost of again violating the 80 chars limit
in spacemacs-editing-visual's packages.el.
Fix issue #11282.
When a new perspective (layout) is created and we are in a Projectile
project, add all buffers belonging to that project to the perspective.
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs//add-project-buffers-to-persp): Add new function.
* layers/+spacemacs/spacemacs-layouts/packages.el
(spacemacs-layouts/init-persp-mode): Add
spacemacs//add-project-buffers-to-persp to persp-created-functions.
This reverts commit 3a23e0cc6b.
This change completely break `SPC f F` in two ways:
1) it breaks the convention followed at various places to have capital letter
bindings to prefill the helm prompt
2) it breaks the main functionality of the bindings which is very important:
press `SPC f F` on a path will brings you directly to the directory of this
file. It allows to quickly nagivate to files references in files.
Commit gabesoft/evil-mc@041b904475 changed
the default key bind of `g r u` to a different (new) function. The old
behaviour is now available at `g r q`.
Unify "Key binding" headers.
Capitalize first word in descriptions.
Smerge transient state section:
Group by column/category.
Merge previous hunk bindings to one line.
Remove Smerge prefix in descriptions.
New Smerge transient state key bindings:
Merge action section:
Kill current
Diff section:
Diff base and mine
Diff mine and other
Diff base and other
Ediff
Match the magit buffer section/sibling navigation keys (bound in evil-magit) and
the evil-collections motion section also suggests using [ and ] for navigation
between sections.
And list the default ibuffer filter group motion bindings:
Forward: TAB and M-n
Backward: S-TAB and M-p
I realize this may be controversial, but as I understand it (correct me if I'm
wrong), all `SPC f F` does differently compared to `SPC f f` is call the vanilla
version of `helm-find-files` that does take `thing-at-point` into account. But I
presume we removed this feature in `spacemacs/helm-find-files` for a reason.
Also, it makes sense as a *forte* version of `helm-find-files` when you can't
find something in your current directory and decide to drill deeper. This
complies with the general tone of uppercase/lowercase bindings in Spacemacs, and
provides more utility than te subtle distinction between different
implementations of `helm-find-files`.
Added key bindings:
`e` `smerge-ediff` to diff column
`K` `smerge-kill-current` to merge action column,
(used upper case K, because lower case k moves the cursor to the previous line)
Renamed "join curr/next hunk" to "Combine curr/next hunks", to match it's
command name: `smerge-combine-with-next`
and moved it from the "Merge Action" column to the "Other" column. Because the
merge action column handles versions while the combine command acts on hunks.
Sorted and groupped the backend keys to match the transient state columns.
Adds `SPC m e u` to the Clojure layer to call `cider-undef`, removing an
existing definition from the current namespace.
This provides a Spacemacs style keybinding for the existing Emacs style
keybinding `C-c C-u`
Capitalize title and column headers.
Reduce two to one space between the key and description in the first column.
Rename and separate "move up/down" to "next line" and "prev line", to reduce the
first columns width, and to make it clear that it doesn't move the hunks.
Reduce four to two spaces between the first and second columns.
Rename "combine with next" to "join curr/next hunk" to indicate that the
hunks/conflicts are combined and not just of the versions.
Add a new column: Diff
Remove "diff" and "to" from diff key descriptions, to reduce the column width.
Move refine from the Other column to the new Diff column.
I often use these operations to ask how mine and other have diverged:
=< smerge-diff-base-mine
== smerge-diff-mine-other
=> smerge-diff-base-other
It's awkward to use their global keybindings under C-c ^ because that exits the
smerge transient-state.
Judging from issue GH-7378 there was no principled reason to omit them, only
that the author did not use them himself.
Noticed a new warning during startup saying
that sqlup-mode is using "=c" where "=" is no
prefix key. Noticed that the entire binding
was not carried out in this case.
Therefore I have removed "=" from the binding
but left it on "c" until enough text
manipulations are available, then it should
be moved to "x text manipulation" group instead.
- dap-debug-edit-template is very important for some of the debug adapters so it
is important to have a keybinding for it to improve the discoverability
- in addition to that I have removed the line that removes clangd from the
server list since it is not needed in latest lsp-mode since it has smaller
priority than ccls/cquery.
ietf layer declared a wrong use-package
declaration, which tried to load ietf-docs
instead of the locally installed irfc package
causing irfc-mode to fail loading.
The issue was that `flycheck-package` explicitly
activated `flycheck-pos-tip-mode` however
this package is owned by `syntax checking layer`
and should only be activated by it directly.
This commit removes the workarounds needed on older versions of `dart-mode` library, now that many of the fixes have landed.
This commit also fixes the integration with flycheck, as there is a new function used on the `develop` branch.
Naming the main file `main.nim` is a `C` convention, not a `Nim` convention. In
fact, `Nimble` defaults to naming the main file after the project at
initialization. I will soon add a function that parses the Nimble configuration
for project entry point and compiles that. Until then, this is a solid
compromise between flexibility and reliability. I also added a doc-string to the
function.
For those with MELPA on their mind. It's easier to work when packaging errors
are reported on the fly, and we don't even have `package-lint` integration for
occasional checkups yet.
It adds no unnecessary verbosity as it is only triggered by `Package-Requires`
and `Package-Version` headers.
Window sizing and layouts can be affected by a large transient state hint,
so having a option for minified hint is especially useful here.
Also reformats the full hint to place `golden ratio` under the "Resize" heading,
reducing overall height by one row.
