Lazy loading of `winner-mode` breaks `ediff` and
`winner-undo`. As a hotfix I have deactivated
lazy loading for that package for now.
Just activating `winner-mode` after `winner-undo`
or `winner-redo` has been called does not solve
the issues described in #12582.
Guard :requires against ivy not projectile. projectile is already owned by
buil-in spacemacs-project layer, so it's always t.
This prevents install of ivy, counsel, swiper and counsel-projectile
packages regardless of helm layer
problem:
Canceling "spacemacs/ace-buffer-links" with "C-g" showed the error message:
"goto-char: Wrong type argument: number-or-marker-p, t"
solution:
Only go to and press the link if it's a position (number).
Thanks sdwolfz for the suggestion to add underscore to the transient states,
then the shift key doesn't have to be released if it was held down to press `+`.
Added key bindings:
Evil numbers:
`SPC n _` decrease number under point
in the transient state:
`j` decrease number under point
`k` increase number under point
`SPC T T _` decrease transparency
`SPC z x _` scale down font
`SPC z f _` zoom out frame
Update documentation:
Zoom frame:
`q` quit transient state
Evil numbers:
`SPC n =` increase number under point
`SPC n _` decrease number under point
`0..9` add a number prefix argument
`q` quit transient state
Fixed a typo and made a small rewrite of the tip about using a prefix argument.
Added keys to transient states:
Font scaling:
Added `_` scale down
Reordered `k` assignment to match the order in the transient state
Frame transparency:
Added `_` decrease
Reordered `k` assignment to match the order in the transient state
Evil numbers:
Added `k` increase
Added `_` and `j` decrease
Zoom frame:
Added `_` zoom frame out
Reordered `k` assignment to match the order in the transient state
Which-key entries for Evil numbers `SPC n`:
Group together keys that call the same command:
From: + and =
To: +,=
From: - and _
To: -,_
`SPC h T e` for `emacs-tutorial` (aliased from `help-with-tutorial` for a more
descriptive name)
`SPC h T v` for `evil-tutor-start`
Added a wikipedia link to the `vi` article, where the origins of modal editing
is discussed.
Emacs 26 added built-in support for line numbers, relative line numbers, and
visual line numbers. Spacemacs supports only absolute and relative, but there is
no way to access the visual mode. It's hard to get around this, since Spacemacs
abstracts line numbers to a reasonably high degree.
Arguably, `visual` is much more useful than `relative` as a display type. Visual
line numbers are like relative line numbers, but only lines that are actually
showing are counted. This means:
1. Hidden lines are not counted. If a large amount of text is folded, the line
numbers won't jump from "10" to "546". This is particularly useful in
buffers like `magit-status`, where a large amount of information is folded
by default.
2. Lines that are wrapped are counted as multiple lines, since they're being
displayed as multiple lines in the editor. Each visual line will be
numbered - unlike `relative`, where the entire thing is numbered... Once.
With standard relative line numbers, you can't actually navigate using the line
numbers in the sidebar as soon as folded or wrapped lines are introduced. Since
this is one of the main use cases for relative line numbers, this is a big
problem.
Visual mode fixes that problem. Every line that's being displayed is labelled.
Numbers always correspond to the actual number of lines you'd need to navigate
to reach that line.
This commit extends Spacemacs' line number interface to provide visual line
number support.
Revealed already bound navigation keys:
- `g` go to first candidate
- `G` go to last candidate
Moved `[q] quit` from bottom left to bottom right, to match other TSs.
Reduced spacing between keys and descriptions from two to one space.
Fixed the minibuffer showing: `nil`
when `select-enable-clipboard` is `nil` and the current files
path/dir/file/line/column/etc. is copied with the keys under
the prefix: `SPC f y`
New var: dotspacemacs-new-empty-buffer-major-mode
Set to a symbol naming a mode (e.g. 'text-mode) to apply that major mode to any
buffers newly created in Spacemacs by spacemacs/new-empty-buffer.
Fixes#12382.
This change will make buffers with the motion state
(e.g., spacemacs home buffer) be able to use the
evil-unimpaired navigation key bindings.
Note that the normal state will inherit the motion
state map anyway, so there's no need to set the
normal state map separately.
It is nicer when user can stay in the "home row" for basic operations like
zooming in and out
Font Scaling Transient State
`k` scale up
`j` scale down
Frame Transparency Transient State
`k` increase transparency
`j` decrease transparency
Zoom Frame Transient State
`k` zoom frame in
`j` zoom frame out
Added two additional Zoom Frame TS keys:
`m` max frame
`f` fullscreen
Delete the hook that commit 9fcf8c898d added
to persp-created-functions, and change spacemacs/ivy-spacemacs-layouts,
spacemacs/helm-perspectives, spacemacs/helm-persp-switch-project, and
spacemacs/ivy-persp-switch-project to achieve the intended goal of adding
the desired buffers after creating a new perspective.
Change spacemacs/helm-persp-switch-project and
spacemacs/ivy-persp-switch-project as follows: If the user selects a
project but then quits without selecting a file or buffer, the new
perspective is now immediately killed. Otherwise, if the perspective did
not already exist, any buffers that belong to the selected project are
added to the perspective.
Add the following actions to spacemacs/ivy-spacemacs-layouts and
spacemacs/helm-perspectives:
* Create a new perspective with the Spacemacs home buffer (default action).
* Create a new perspective with the buffers that belong to the current
buffer's project.
* Create a new perspective with the buffers that belong to the current
perspective (i.e., make a copy of the current perspective).
This commit resolves the problem reported in
9fcf8c898d (commitcomment-33343455).
This commit also fixes a problem with the default action for
spacemacs/ivy-spacemacs-layouts and spacemacs/helm-perspectives. According to
commit 7b931a9f5b, the default action is supposed
to display the home buffer if the action creates a new perspective, which was
determined by checking whether the perspective was missing from the list of
perspectives _before_ switching. However, commit
eb7ca651fe changed this logic so it was checking
whether the perspective was missing from the list of perspectives _after_
switching. This commit restores the correct logic.
* CHANGELOG.develop: Update.
* layers/+completion/ivy/funcs.el (spacemacs/ivy-spacemacs-layouts): Add
"Copy Current Layout" and "Create Project Layout" actions to the docstring.
Use spacemacs//create-persp-with-home-buffer for the default action.
* layers/+completion/ivy/packages.el (ivy/post-init-persp-mode): Add
actions for spacemacs//create-persp-with-current-project-buffers and
persp-copy.
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs||switch-layout): New macro. Switch to the named perspective,
and initialize it using the provided forms if the perspective is new.
(spacemacs//create-persp-with-current-project-buffers): New function.
Create a new perspective with the current project's buffers.
(spacemacs||switch-project-persp): New macro. Switch to the named
perspective, and evaluate the provided forms with
projectile-after-switch-project-hook bound with a hook that adds the
current project's buffers to the perspective. If the user quits during the
evaluation of the forms, kill the perspective.
(spacemacs//create-persp-with-home-buffer): New function. Switch to the
named perspective, and go to the Spacemacs home buffer if the perspective
is new.
(spacemacs/helm-perspectives): Use spacemacs//create-persp-with-home-buffer
for the default action. Add actions for
spacemacs//create-persp-with-current-project-buffers and persp-copy.
(spacemacs//helm-persp-switch-project-action): New function. Switch to the
named perspective and call projectile-switch-project-by-name, using the new
spacemacs||switch-project-persp macro. Bind helm-quit-hook with a hook
that kills the new perspective if the user quits
projectile-switch-project-by-name.
(spacemacs/helm-persp-switch-project): Use
spacemacs//helm-persp-switch-project-action.
(spacemacs//ivy-persp-switch-project-action): New function. Switch to the
named perspective and call counsel-projectile-switch-project-action with a
hook to add the project's buffers to the new perspective.
(spacemacs/ivy-persp-switch-project): Delete advice for
counsel-projectile-switch-project-action. Use
spacemacs//ivy-persp-switch-project-action instead.
(spacemacs//add-project-buffers-to-persp): Deleted.
* layers/+spacemacs/spacemacs-layouts/packages.el
(spacemacs-layouts/init-persp-mode): Don't add a hook to
persp-created-functions.
global-hl-todo-mode uses function to activate only for modes that are in the
activate list but are not org-mode.
Reference: 24b9925b1b/hl-todo.el (L185-L188)
Adds a comment re `hl-todo-activate-in-modes` var
Two `SPC h SPC` toggles were missing their documentation:
- Nameless
- Minibuffer System Monitor (the symon package)
Now they match the other entries by showing:
- current state
- name (this was only shown before)
- documentation
- key binding (only minibuffer-system-monitor shows a key binding)
The nameless key binding `SPC m T n` only works in emacs-lisp-mode. It's key
binding might need to be described another way.
Defines a transient state for symbol-overlay, and bind it to ~SPC s o~ and ~SPC s O~.
Updates:
* update due to the signature change of `symbol-overlay-get-list`.
* align the docstring using `^^` and add `quit` button.
I have introduced a bug by merging
efa04de617.
This change removes the symptom with the
cost of again violating the 80 chars limit
in spacemacs-editing-visual's packages.el.
Fix issue #11282.
When a new perspective (layout) is created and we are in a Projectile
project, add all buffers belonging to that project to the perspective.
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs//add-project-buffers-to-persp): Add new function.
* layers/+spacemacs/spacemacs-layouts/packages.el
(spacemacs-layouts/init-persp-mode): Add
spacemacs//add-project-buffers-to-persp to persp-created-functions.
Window sizing and layouts can be affected by a large transient state hint,
so having a option for minified hint is especially useful here.
Also reformats the full hint to place `golden ratio` under the "Resize" heading,
reducing overall height by one row.
Fixes helm not being loaded before calls to:
read-file-name and completing-read.
These are some commands that call either of those two functions:
spacemacs/rename-current-buffer-file (SPC f R)
In a Treemacs window:
treemacs-add-project-to-workspace (C-c C-p a)
In a Magit buffer:
magit-checkout (b b)
Thanks Miciah for a more elegant solution.
This commit also reverts:
Fix helm loading for layouts transient state #11705
because it's not needed anymore.
And the previously commented out transient hook minibuffer-setup-hook (it
doesn't seem to ever have been used) is removed because:
- It loads helm after a command is called that uses helm (instead of before)
- (spacemacs|hide-lighter helm-mode) has previously been moved to the
helm/init-helm :config section.
Moved:
- ("ai" "irc") to both the `erc` and `rcirc` layers. They don't have to be
renamed until the layers are loaded.
- ("ay" "ipython notebook") to the `ipython-notebook` layer.
- ("p$" "projects/shell")
("'" "open shell")
("as" "shells")
to the `shell` layer.
- The commands with keybindings from spacemacs-bootstrap/packages.el to
spacemacs-defaults/keybindings.el.
Removed:
- ("gd" "diff") it seems to be an old group name, there's no `SPC g d` group at
the moment.
- ("Re" "elisp") and ("Rp" "pcre") because they have moved to:
("xr" "regular expressions")
("xre" "elisp")
("xrp" "pcre")
- ("xm" "move") seems to be an old move text group, the current keybindings are
`SPC x J` and `SPC x K` which opens the Move Text Transient State.
- ("b" "persp-buffers") because `SPC b` is also renamed as ("b" "buffers") which
is more general and not persp-mode specific.
problems:
the delete file prompt doesn't show which file it's about to delete,
and when the deletion request is canceled, then the question remains in the
minibuffer (the text disappears when an action updates the minibuffer, like
moving the cursor, but it might be confusing to still be seeing the question
after it's been answered)
solution:
show the file name in the delete file prompt, and show a canceled message
By analogy with the "zz", "zb", "zt" vim / evil bindings, this adds an
additional key binding "z" for `recenter-top-bottom` to the following
transient states which navigate around the buffer in large jumps:
- auto-symbol-highlight
- error
- buffer
- vcs
- org-babel
This allows for repositioning of the buffer for visibility without having to
exit the transient state.
Minor updates are also made to documentation of other transient states.
1. Fix `short-name` for directories. Previously it was empty string.
2. Remove redundant check for existing buffer:
1. `(get-buffer new-name)` always return `nil`, because `new-name` is a path
to file, not a file name.
2. `(find-file new-name)` handles this situation.
3. `dired-rename-file` handles this situation as well.
3. Use `dired-rename-file` to do the dirty stuff.
1. Renames files and directories.
2. All associated buffers are updated. If you rename a directory, all buffers
that were visiting files from that directory now visit files from new
directory.
4. Properly handle recentf list update for directories - all files from the
renamed directory are removed from recentf list and the same files but from
new directory are added back.
problem:
`'face 'minibuffer-prompt` and `new-name` are shown with an orange color,
and `describe-char` shows that they have the face: `font-lock-warning-face`
solution:
adding a newline before them removes the orange warning color
Before this commit, Spacemacs assigned an anonymous function to the
compilation-finish-function variable. This variable was deprecated
in Emacs 22.1 and removed in Emacs 27.1 in favor of the
compilation-finish-functions hook. Consequently, the assignment has
no practical effect in Emacs 27.1.
Although we could add the Spacemacs function to the new
compilation-finish-functions hook, the function serves little purpose; it
prints a generic message when compilation succeeds:
compilation ok.
and it prints the key binding for spacemacs/next-error when compilation
fails:
There were errors. Use SPC e n to visit.
However Emacs already prints messages to indicate success or failure,
respectively:
Compilation finished
or (for example)
Compilation exited abnormally with code 1
Because the Spacemacs function prints its "There were errors" message
immediately after Emacs prints its "Compilation exited abnormally" message,
the latter was obscured. Because the exit code in Emacs's message could be
useful and the added value of the Spacemacs function's message is minimal,
we can simply delete the Spacemacs function.
* layers/+spacemacs/spacemacs-defaults/funcs.el
(compilation-finish-function): Delete the assignment and anonymous
function.
The `SPC f a` keybinding was already used by the `fasd` layer so a
workaround had to be found for the newly introduced one.
Refs: c2e377c902
Refs: #11224
Thanks @agzam for pointing it out and investigating potential solutions.
Fix issue #11207.
Only try to disable eyebrowse's advice on rename-buffer if we can find that
advice. If eyebrowse is older than version 0.7.6 (2017-11-22), the advice
will not exist, and attempting to delete it will cause an error:
ad-disable-advice: rename-buffer is not advised
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs//activate-persp-mode): Only disable the
eyebrowse-fixup-window-configs advice for rename-buffer if the advice
exists.
See README.org for details
<<amendment 1>>
Updated some keybindings based on CONVENTIONS doc
Corrected file headers
Incorporated some immediate feedback from MaskRay
<<amendment 2>>
Corrected keybindings in README.org
<<amendment 3>>
Eliminated stray org-mode tag at table foot in README.org
Eliminated new 'l' prefix and moved bindings under 'g'
<<amendment 4>>
Updated defaults in config.el based on feedback from sebastiencs (lsp/lsp-ui dev)
- lsp-ui-sideline enabled by default
- lsp-ui-peek-expand-by-default disabled
<<amendment 5 09/04/18>>
Removed 'spacemacs/' prefix from lsp-format-buffer binding
<<amendment 6 09/04/18>>
Moved lsp-ui-peek bindings under j (jump)
Added goto bindings for new lsp-mode functions goto type definition and goto implementation
<<amendment 7 31/05/18>>
Corrected layer title in file headers
Rebased on dev tip (390462e)
<<amendment 8 03/07/18>>
Added keybindings for lsp-describe-thing-at-point,
lsp-workspace-restart, lsp-execute-code-action suggested by Yyoncho (LSP
Java)
Added avy keyboard navigation function provided by MaskRay
Reverted lsp-ui-peek to expand by default after an upstream change that
restricts expansion to current document, addressing the previous
performance issue.
<<amendment 9 04/07/18>>
Corrected keybinding for lsp-describe-thing-at-point
<<amendment 10 19/07/18>>
Rebound lsp-restart-workspace under mlq
Declared 'lsp' prefix (myrgy)
Added evil-set-command-property fix suggested by Yyoncho
Moved lsp-c-c++ layer from private branch to this PR after spending too
many hours of my life rebasing after circle CI picks up a formatting
error :)
<<amendment 11 25/07/18>>
Rebased
Bound cquery-freshen-index under lf
Bound cquery-preprocess-file under lp
<<amendment 12 01/08/18>>
Rebased
(c-c++ layer) moved semantic refactor refactor-at-point binding from mr
to mrp to prevent key binding error when semantic layer enabled
<<amendment 13 17/08/18>>
Added option to select ccls or cquery backend based on work by myrgy
Rebased on current upstream develop
<<amendment 14 20/08/18>>
Incorporated feedback from myrgy and maskray.
Corrected some duplication/inconsistencies.
Rebased.
<<amendment 15 21/08/18>>
Reduced duplication in backend config
<<amendment 16 22/08/18>>
Removed lsp-c-c++ layer example -- to be merged with c-c++ layer once
this PR is sorted
<<amendment 17 23/08/18>>
Added CHANGELOG.develop entry as per updated contribution guidelines.
<<amendment 18 24/08/18>>
Moved some keybindings as per feedback from sdwolfz
Before this commit, spacemacs-layouts/init-eyebrowse advised rename-buffer
with spacemacs//fixup-window-config. However, this advice causes problems
if persp-mode is not activated when a function tries to rename a buffer.
In particular, Spacemacs's CI uses Emacs's batch mode to run
spacemacs/publish-doc, which uses rename-buffer. In batch mode, persp-mode
is not activated, and consequently spacemacs/publish-doc was failing:
Publishing file /home/travis/.emacs.d/news/news01.org using ‘org-html-publish-to-html’
Skipping check for new version (reason: dotfile)
Wrong type argument: hash-table-p, nil
Warning (emacs): recentf mode: Wrong type argument: hash-table-p, nil
spacemacs/publish-doc failed
In order to avoid problems, this commit moves the advising of rename-buffer
from spacemacs-layouts/init-eyebrowse to spacemacs//activate-persp-mode.
* layers/+spacemacs/spacemacs-layouts/packages.el
(spacemacs-layouts/init-eyebrowse): Move advice from here...
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs//activate-persp-mode): ...to here.
Eyebrowse stores window configurations for workspaces in frame properties.
These window configurations reference buffers by name, which means that
these references must be updated when a buffer is renamed. To this end,
eyebrowse advises rename-buffer.
Spacemacs integrates eyebrowse with persp-mode by saving the eyebrowse
workspaces for a perspective as a parameter for that perspective so that
Spacemacs can restore a perspective's workspaces when switching to that
perspective. However, eyebrowse's advice for rename-buffer fails to update
inactive workspaces, for which the window configurations are stored in
perspective parameters and not frame properties.
This commit disables eyebrowse's advice and adds perspective-aware advice
to update buffer references in workspace window configurations.
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs//fixup-window-configs): New.
* layers/+spacemacs/spacemacs-layouts/packages.el
(spacemacs-layouts/init-eyebrowse): Remove eyebrowse-fixup-window-configs
advice for rename-buffer and advise with spacemacs//fixup-window-configs
instead.
Define an alias and use it internally so that (1) the name of the command will
be better to understand what it does than the original name and (2) Helm or Ivy
interface is invoked instead of Ido.
These are suggested in PR #11115.
This fixes issue #5776.
* layers/+spacemacs/spacemacs-layouts/packages.el
(spacemacs-layouts/init-persp-mode):
Set persp-add-buffer-on-after-change-major-mode to 'free.
Fix issue #9477: spacemacs/smart-closing-parenthesis sometimes adds an
extra closing parenthesis.
spacemacs/smart-closing-parenthesis may call sp-up-sexp twice: first to
find the position of an existing closing delimiter or the position at which
one would be inserted, and second to insert a delimiter if necessary or
else move point after the existing closing delimiter.
The problem is that each call to sp-up-sexp may insert a delimiter, but
spacemacs/smart-closing-parenthesis is supposed to insert at most one.
The solution is to undo any edit performed by the first call to sp-up-sexp.
* layers/+spacemacs/spacemacs-editing/funcs.el: Undo any edit performed by
the first call to sp-up-sexp.
Add aliases for commands that ido-mode remaps that we want to bind to
Spacemacs keys, and use these aliases in the Spacemacs key bindings so that
these bindings invoke the original commands rather than the ido commands.
See <https://github.com/syl20bnr/spacemacs/issues/10237#issuecomment-359861570>.
Only using visual state as entry point for evil-surround doesn't guarantee
surround is available for evil-yank and evil-delete. Fixed by also using
operator state.
Fixes#11019 and #11021
The column-indexing toggle did not have a :status property. As a result,
the toggle command would enable the toggle but would not disable it. In
addition, the absence of :status prevented -off and -on commands from being
defined.
This commit adds a :status property so that the toggle works properly and
-off and -on commands are defined.
This commit also renames the toggle to "zero-based-column-indexing" in order to
make its purpose clearer.
* layers/+spacemacs/spacemacs-defaults/keybindings.el (column-indexing):
Add :status and rename to "zero-based-column-indexing".
* add new dotfile function `dotspacemacs/user-env`
* add ignored env. vars with variable spacemacs-ignored-environment-variables
* ignore env vars: SSH_AUTH_SOCK and DBUS_SESSION_BUS_ADDRESS
* update documentation in DOCUMENTATION.org
* update .spacemacs.template with new function
* rename environment file from spacemacs.env to .spacemacs.env
* move location of .spacemacs.env file to home or dotdirectory
* add a header to the generated .spacemacs.env file to explain what it is
* make SPC f e e fallbacks to the function dotspacemacs/user-env if the user
manages the env var by themselves
* make SPC f e E call the new function dotspacemacs/user-env
* sort environment variables in .spacemacs.env file
When :enabled-for-modes is nil we default it to '(prog-mode text-mode), but if
any of them is in :disabled-for-modes then it shouldn't be enabled by default.
This commit fixes the second part.
See updated DOCUMENTATION.org and FAQ.org for more info.
* add core-env.el
* add library load-env-vars.el
* add bootstrap package dotenv-mode.el
* remove spacemacs-environment from bootstrap layer
* remove dotspacemacs variable dotspacemacs-import-env-vars-from-shell
* remove dotspacemacs variable dotspacemacs-improt-env-vars-shell-file-name
* add new key binding SPC f e e to open spacemacs.env file
* add new key binding SPC f e E to reload environment variable from env file
* add new key binding SPC f e C-e to re-initialize the env file from shell.
Commit d7f5b58890 added a lazy-loader for
spaceline but used lazy-load-window-purpose as its name. As result,
window-purpose lazy-loader got overwritten and window-purpose didn't load at
all.
Replace push with add-to-list in layer init functions and related code.
Modify spacemacs|add-toggle to check for and update an existing toggle in
spacemacs-toggles and only create a new toggle if none already existed.
Replace a conditional push onto erc-packages with use of :toggle.
When initializing which-key, set which-key-replacement-alist to its default
or customized setting before adding all the Spacemacs replacements. We
want to keep the stock replacements but avoid adding duplicates of the
Spacemacs replacements.
Replace the emacs-lisp-mode-hook lambda with a named function to avoid
adding duplicate hooks (which can add duplicate definitions of the
evil-surround pair).
Emacs 26.1 will introduce a new native line numbers feature:
"display-line-numbers". It includes relative line numbers, is faster than
current linum-mode, and doesn't use the margin area (it has its own area). So
yeah, we want to use the new feature when possible.
No changes are required on the user side, except for Emacs 26 users are
recommended to remove nlinum layer from their configuration (if they have
enabled it).
With this change:
- Emacs 26:
- uses display-line-numbers by default.
- linum and linum-relative packages are excluded.
- Emacs 25:
- does NOT use display-line-numbers.
- continues to use linum and linum-relative.
- nlinum layer:
- can still be used as before in Emacs 25.
- is NOT recommended in Emacs 26, but can be used.
- when enabled, excludes display-line-numbers.
Also contains some bug fixes:
Fixes a bug where setting `dostpacemacs-line-numbers` to `t` or `relative`
enabled line numbers in every buffer, instead of only in buffers that derive
from prog-mode and text-mode.
Likewise fixes a bug where specifying `:enabled-for-modes nil` (or not
specifying `:enabled-for-modes` at all) in `dotspacemacs-line-numbers` settings
meant "enable in all modes" instead of "enable in modes derived from prog-mode
or text-mode".
Because of this change, also adds a way for users to enable line numbers
in *all* buffers.
Removes check for special buffer. All our current checks should be enough to
enable line numbers only where it makes sense. Disabling in all special buffers
is not necessary.
The `spacemacs//helm-navigation-ts-set-face` function had been changed to call
the face `spacemacs-helm-navigation-ts-face` with `-ts-`, but the face
definition was still called `spacemacs-helm-navigation-ms-face` with `-ms-`.
* Fix various isolated typos
"apppend" -> "append"
"availabe" -> "available"
"Descripti using ternon" -> "Description"
"you have not them" -> "you don't have them"
"new on" -> "new one"
"plained" -> "curved"
"repel" -> "REPL"
"vairable" -> "variable"
* Fix a few errors in the CoffeeScript layer readme
Add a missing "the".
Correct a reference to the layer as "javascript" to "coffeescript".
Fix the syntax on the link to CoffeeLint.
* Fix typos: "dofile" -> "dotfile"
* Fix typos: "formated" and "formating"
"formated" -> "formatted"
"formating" -> "formatting"
* hy: Fix docstrings in funcs.el
Fix copy-and-pasted docstring text for
spacemacs/hy-shell-eval-current-form-and-go and
spacemacs/hy-shell-eval-region-and-go.
* Fix typos: "indendation" -> "indentation"
* Fix typos: "the the", "a a"
Fix duplicated (or misplaced) articles.
* Fix typos: "wether" -> "whether"
* Fix typos: "intialize" -> "initialize"
For now we have an issue with invalid XMP image format when dumping.
So we force utf-8 separator.
spaceline-compile is really long and not really necessary for regular users.
Advanced users must explicitly call spaceline-compile in their dotfile and be
ready to pay a 0.5s penalty when loading emacs.
Before the display system is initialized, we cannot reliably make font
measurements so the height will be incorrect. This lead to display artefacts
if emacs was started in daemon mode without a graphical interface and later a
graphical client was connected (so for example, if you do `emacs --daemon`
followed by `emacsclient -c`).
Reduce the width of the listed key bindings by:
Moving the range and highlighted symbols counter to the right of the transient
state title.
Shorten some key description names.
Reduce three instances of "search" to just one.
And reorder the listed keys based on their search scope, small to large:
swoop, buffers, files, project.
We have key bindings to create two and three column
window layers.
This commit makes available a key binding to return to
the default spacemacs window layer, the single column one.
This idea is to have the spacemacs-base distribution only configure defaults for
built-in packages. Those buit-in packages are now configured in the new layer
spacemacs-defaults.
Additionally some other packages of spacemacs-base have been dispatched to
better suiting spacemacs layers.
Projectile has been moved to the new layer spacemacs-project
- Move the following packages to bootsrap distributio layer:
- exec-path-from-shell
- evil-evilified-state
- holy-mode
- hybrid-mode
- spacemacs-theme
- ace-window has been moved to spacemacs-navigation
- centered-buffer-mode has been moved to spacemacs-editing-visual
- pcre2el has been moved to spacemacs-editing
- evil-escape and evil-visualstar have been moved to spacemacs-evil
This reverts commit 29c78ce841 and all other fixes
that have been made afterwards.
The motivation is that use-package is seen by many as a replacement for
`require`. Is use-package always defer the loading of packages then is breaks
this use case, this does not respect POLA so even if it was making Spacemacs
loading faster (up to 3s faster on some startup on my machine) we just cannot
use it, it would be irresponsible. Spacemacs should be easy to use, loading
performance will come with time but it is not a priority.
Before the commit 4b111f7701 it was possible to create new perspectives from projects not available on the list.
It would be possible to provide a path to a project that has not been open previously by emacs, and have the perspective created. Now that a match is required, it is not possible anymore, as the path provided is not one of the possible matches on the list.
This commit changes the behavior back to allow accessing projects that have not been visited before. Without this change, one needs to open a specific project first, using `C-x C-e` or `SPC f f` and then switch to the layout.
Fix#10177
counsel-projectile has updated custom actions mechanism[1] and
counsel-projectile-switch-project-actions is no more defined
Also,
- moved counsel-projectile into spacemacs-layouts from ivy layer as
perspective/layout based project switching depends on it instead of swiper
- removed swiper from spacemacs-layouts
[1] a4e9a34d7f
Use `counsel-projectile-switch-project-action` instead of
`projectile-switch-project-by-name`, to match the additional actions available
via `counsel-projectile-switch-project` (SPC p p).
Since we have now a variable for the mode-line theme, it makes sense to move
the scaling of the mode-line to this variable. Thus the property
=:powerline-scale= of variable dotspacemacs-default-font has been removed and
it is replace by the property =:separator-scale= used in the variable
=dotspacemacs-mode-line-theme=.
This commit also adds a the property =:sperator= for the variable
=dotspacemacs-mode-line-theme= which allows to set the separator type.
Example of the final result:
dotspacemacs-mode-line-theme '(all-the-icons
:separator cup
:separator-scale 1.5)
Documentation has been updated to reflect the changes.
New layer variable `dotspacemacs-mode-line-themes`:
Set the theme for the Spaceline. Supported themes are `spacemacs',
`all-the-icons', `custom', `vim-powerline' and `vanilla'. The first three
are spaceline themes. `vanilla' is default Emacs mode-line. `custom' is a
user defined themes, refer to the DOCUMENTATION.org for more info on how
to create your own spaceline theme."
See DOCUMENTATION.org changes for more info.
This commit adds support for `spaceline-all-the-icons` package.
Had to create dummy init functions at some places since the owner of a package
is the last layer that defines the init function of a package. And a package
can be installed only if it has an owner.
Delete layer evil-cleverparens and move the package to spacemacs-evil layer.
The feature is called "Safe structurral editing" for lisp dialects. Support for
it is added via pre-init functions in each of the concerned layer and proper
documentation is added to their README.org files.
This also removes the recently added package evil-smartparens. The goal is
to choose the best package for evil safe structural editing. For now we use
evil-cleverparens as we supported it first, if evil-smartparens is shown to be
a better package we will be able to switch to it.
This is more dwim in the sense that the normal deleting commands now behave more
like paredit, i.e. region deletion is adjusted to always keep the pairs
balanced.
The `helm-split-window-in-side-p` variable has been renamed to:
`helm-split-window-inside-p` here: 8b5df59a14
This caused the following variable `helm-always-two-windows` to become enabled.
There is a space in the buffer name of undo-tree. The popwin did not display right and the function `undo-tree-visualizer-quit` also seems not work well until I correct the buffer name.
In perspective transient state. b and l keys in the docstring have no
corresponding functions declared whenever both helm and ivy layers are not
used.
Add two private variables to fix the issue:
- spacemacs--persp-display-buffers-func
- spacemacs--persp-display-perspectives-func
These variables are set to the correct functions by the helm and ivy layers via
a use-package hook.
Default is `ignore` function so b and l does nothing if both helm and ivy layers
are not used, TODO: we should find a better default function.
This message is shown when Spacemacs starts:
../../Users/Username/AppData/Roaming/.emacs.d/layers/+spacemacs/spacemacs-purpose/local/spacemacs-purpose-popwin/spacemacs-purpose-popwin.el: Obsolete name arg "pupo" to constructor purpose-conf
The name argument, seems to only be needed for Emacs <= 24.3, according to this
line in the emacs-purpose package:
;; the name arg ("purpose-x-code1") is necessary for Emacs 24.3 and older
source:
00ddafcf48/window-purpose-x.el (L71)
The minimum version supported by Spacemacs is 24.4.
When `evil-search-module` is set to:
evil-search:
Then `/` search highlights are cleared by pressing: `SPC s c`,
and `C-s` highlights are cleared with `:noh`.
isearch:
Then `/` highlights are cleared with `M-x evil-ex-nohighlight`,
and `C-s` highlights are cleared with both `SPC s c` and `:noh`.
This replaces the older pattern
:toggle (configuration-layer/package-usedp ..)
This implementation ensures that :disabled-for honors dependent packages, i.e.
if package a depends on package b, which is owned by layer c, and layer c is
disabled for layer d, then neither package a nor b will be configured for layer
d. Previously, this was only true for package a, but not b.
This commit also fixes:
- configuration-layer/describe-package now shows which post-init and pre-init
functions are disabled, if any
- Does not recreate all layer objects unconditionally when calling
configuration-layer/discover-layers. Previously, this led to all layers being
recreated after e.g. `SPC h SPC`, without any of the dotfile information.
Since this information is now necessary for
configuration-layer/describe-package, it’s important that we don’t clear the
indexed layers when invoking this function.
Problem:
Creating a new workspace from the workspaces transient state, requires that one
first looks for the next available workspace number, and then presses that
number key.
Solution:
Add the keys: `c` and `C` to create a new workspace. Lowercase exits the state
and uppercase keeps it open.
Notes:
This matches the behaviour of 0..9, which exits the state, and C-0..C-9, which
keeps it open.
This is the last key/command, from the C-c C-w eyebrowse key bindings, that was
missing from the workspaces transient state.
- bind spacemacs-layouts/non-restricted-buffer-list to SPC b B instead
of SPC B b
- rename buffer listing functions in which-key to be more explicit
PR title:
bindings: non-restricted-buffer-list-* to SPC B b instead of SPC B b
PR message:
I don't know what was the thought behind this, but `spacemacs-layouts/non-restricted-buffers-list-*` was alone in its `SPC B` prefix and `SPC b B` was almost free, only used in one layer that I would be surprised if it was widely used (`ibuffer`).
I also renamed buffers listing functions in `which-key` to be clearer for the user. Indeed, I find that names like `helm-mini` are pretty obscure and kind of defeat the purpose of `which-key` and `spacemacs-layouts-non-restricted-buffer-list-blah` was so long that it couldn't even be displayed.
Now the user can choose between `list-buffers` or `global-list-buffers` for listing buffers.
Group together the which-key entries that call the same command:
k and - becomes k,-
u and _ becomes u,_
Declare a prefix name for SPC x i, this changes the SPC x entry:
from: "i -> +prefix"
to: "i -> +inflection".
Capitalize the transient state title, so that it matches the other TS titles.
Sort the code and documentation key bindings alphabetically.
* restore these functions' signatures to those of their stock evil
counterparts (evil-paste-{before,after}), allowing
`evil-mc-execute-evil-paste` to paste at each cursor when there
are multiple instead of pasting at only one cursor
* retain these functions' ability to directly take a register as
input when called interactively
* regression was caused by bfb565eea9
If dotspacemacs-auto-generate-layout-names is non-nil, and the user
tries to open a layout in a position that doesn't yet have a layout,
then create a new layout with an automatically generated name.
* Make RET and TAB (C-m and C-i) perform the same actions as <return>
and <tab> so the maps work in the terminal.
* Catch <return> in workspaces transient state so that it exits without
executing a command (like already done for layouts).
* Add "workspace w/helm/ivy" to docstring, mirroring the layouts
docstring.
Problem:
Spacemacs rewrites the evil-mc-mode-line variable, to remove the evil-mc mode
line text, when there's only one cursor. The rewrite blocks the recent evil-mc
updates, that made the multi cursor, mode line text, more readable.
Solution:
Use the new evil-mc-one-cursor-show-mode-line-text variable, to only hide the
mode line text, when there's one cursor. This unblocks the current, and any
future updates, that the evil-mc package makes to the mode line text.
Add two new functions: `spacemacs/transient-state-register-add-bindings`
and `spacemacs/transient-state-register-remove-bindings` to prevent layer
authors and end users from dealing with the underlying variables' subtleties.
