1de01151e3
* add matrix_diagram.md * info.json: correct key sequence Fixes an off-by-one error between Right Split Backspace and Enter. * refactor and unify keymaps Edit the `default` and `via` keymaps for consistency layer-to-layer, to each other, and to the `info.json` layout data. * info.json: apply friendly formatting * add LAYOUT_ansi_blocker_split_bs * add LAYOUT_ansi_blocker * add LAYOUT_ansi_blocker_tsangan_split_bs * add LAYOUT_ansi_blocker_tsangan * add LAYOUT_iso_blocker_split_bs * add LAYOUT_iso_blocker * add LAYOUT_iso_blocker_tsangan_split_bs * add LAYOUT_iso_blocker_tsangan * add layout reference keymaps * info.json: remove extra line breaks * edit maintainer value
20 lines
1,009 B
Markdown
20 lines
1,009 B
Markdown
# Avalon PCB by FJLaboratories
|
|
|
|
The following is the QMK Firmware for the Avalon PCB, both Solder and Hotswap, for Trailblazer Keyboards.
|
|
|
|
* Keyboard Maintainer: [mrnoisytiger (FJLaboratories)](https://github.com/mrnoisytiger)
|
|
* Hardware Supported: Avalon
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make fjlabs/avalon:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|