5c2e668190
Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
27 lines
No EOL
1.1 KiB
Markdown
27 lines
No EOL
1.1 KiB
Markdown
# SBL
|
|
|
|
|
|
|
|
An O ring mount 60%, akin to the otd 356mini
|
|
|
|
* Keyboard Maintainer: [Zeix](https://github.com/itsme-zeix)
|
|
* Hardware Supported: SBL Solder PCB rev1
|
|
* Hardware Availability: https://dnworks.co/products/sbl
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make dnworks/sbl:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make dnworks/sbl:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Short the 'USB_BOOT' button and plug in keyboard or briefly short the `RESET` and `GND` pads on the SWD header twice
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |