This avoids more problems found by @duianto.
Also:
* Use more descriptive variable names
* Print message explaining lack of narrowing in visual block mode
* Apply @duianto's fix to only activate visual selection it if it was active
previous to the creation of the indirect buffer
* Block use of visual block mode because of continuing problems in that mode,
and its questionable usefulness in this case
* Extract commonalities out of the narrowing functions
* Make the new keybindings into a list in the changelog for readability, per
@duianto
Based on http://xenodium.com/search-bash-history-with-emacs-helm/
Add new helm/ivy functions `spacemacs/helm-vterm-search-history`,
spacemacs/counsel-vterm-search-history to search bash history and insert to
vterm/shell
Bind this function to M-r for vterm
New layer variable spacemacs-vterm-history-file-locatition to customize bash file
Default is nil.
Also bind add counsel-shell-history to `, H` for shell-mode in the same
convention as helm counterpart.
[shell] wip
Searching for information about configuration layers is confusing because both
the overview and development info pages have the same title (try it with
google). Specifying those info pages title names and adding cross links makes
the docs friendlier.
Added 'ranger as an option to the variable: ranger-enter-with-minus
Changed the default value from: t to: 'deer.
Bound the key to evil-motion-state-map instead of evil-normal-state-map
so that - also works from the Spacemacs home buffer.
* Added `helm-ag-success-exit-status` when using `rg`
It's been advised by the upstream of `helm-ag` to set
`helm-ag-success-exit-status` to `'(0 2)`.
This commit adds this.
ref: https://github.com/emacsorphanage/helm-ag#helm-agel-with-other-searching-tools
Signed-off-by: Lucius Hu <lebensterben@users.noreply.github.com>
* Use `magit-status-setup-buffer` instead of `vcr-dir`
This is suggested by the package itself.
Ref: 4da1a53f2f/helm-ls-git.el (L184-L189)
Co-authored-by: Lucius Hu <lebensterben@users.noreply.github.com>
Many new users (quite logically) assume that the additional-packages list
behaves like installing a layer, so they assume the file is also loaded
automatically. This commit adds info about the requirement to also load the
package with load/require/use-package in the user-config section of the dotfile.
I chose to go this way rather than the other way because:
* Whenever you can avoid holding down a modifier key, great!
* It seems like the more specific should yield to the more general
This may be a controversial change, because it could break some folks' finger
memory. However I consider this a very unpleasant inconsistency that inhibits
the development of finger memory, so I thought I would at least suggest it as
the default for Spacemacs.
Pull request #10297 made the Emacs server optional, so that it does
not start up unless the init file is modified to enable it. The
documentation, however, indicates that the opposite is true. This
fix updates the documentation to be consistent with the actual
behavior.
* meghanada is an LSP client for Java
* eln-cache (gccemacs) is for the native-comp branch of Emacs 28.0
* vimish-fold is there because said package has persistent folds
"SPC d" was used for documentation related keybindings, such as in `dash`
layer.
But it's now used for `dap` layer exclusively.
Removing this won't cause any issue as `dap` layer would correctly set
the keybindings once it's loaded.
* Bind typescript-format to "==" or "=" depending on backend
This fixes a problem when using 'lsp backend: the lsp layer binds its own
formatting functions under "=" as a prefix. The spacemacs/typescript-format
function which the typescript layer defines has advantages over these, mainly
it respects the typescript-fmt-tool variable (uses the formatting tool that
theuser specified).
This patch solves this by keybinding leader+"==" to the function when
typescript-backend is set to 'lsp and binding to leader+"=" in any other case.
* Fix an accidentally deleted keybinding in table in documentation
* use getter for backend variable
Co-authored-by: nanashi0x74 <rian.lindenberger@mpq.se>
This enables navigating up in the `ivy-reverse-i-search` list with `C-k`.
The same rebinding from `C-k` to `C-M-k` to kill a list entry,
is also done in the `ivy-switch-buffer`.
By default Ivy uses `find-file` which uses Emacs `abort-if-file-too-large`
function to check/warn before opening large files. That function however does
not take into account Spacemacs its `spacemacs-large-file-modes-list`. Instead
ivy should use `find-file-noselect` to skip Emacs it large file warning and let
it to Spacemacs its `spacemacs/check-large-file` function. Additionally [Emacs
tips on
comments](https://www.gnu.org/software/emacs/manual/html_node/elisp/Comment-Tips.html)
recommends to use 3 semicolons for comments that function as headings.
Fsharp-mode has recently undergone some major changes. FSAutocomplete is
no longer distributed with Fsharp-mode. Instead Eglot is used a language
server that pulls in FSAutocomplete. To get auto-completion working
again eglot-fsharp has to be required and an instance of Eglot has to be
started once an F# file is opened.
* Group `line-number` funcs under SPC t n
* Better name: absolute-line-numbers
Keep the old symbols around for backwards compatibility
Co-authored-by: Rostislav Svoboda <Rostislav.Svoboda@gmail.com>
- Added documentation for the following minor modes:
- lsp-headerline-breadcrumb-mode
- lsp-lens-mode
- lsp-modeline-diagnostics-mode
- lsp-modeline-code-actions-mode
- Added description of Code Lens feature.
- Added description of default values of any variablese introduced in the
commit.
- Added a section to brief mention the DAP integration of lsp-mode, which
leads users the DAP layer for more details.
- Re-formatted the document, inline codes are quoted by '~' instead of '='.
The PR fixes an issue where spacemacs is in a bad state after upgrading. I
suppose what happens is that `evil-set-undo-system` is invoked before `evil` is necessarily the correct version.
org-jira is typically used from org major mode - new keybindings add a more
convenient way of invoking its functions.
The new org-jira submenu is available under "mj" - using the same pattern as
org-trello.
Add org-roam support along with keybindings under new menu prefix "SPC a o r".
Assign layer search keybinding ("SPC a o /") to helm-org-rifle, falling back to
previously assigned function (org-occur-in-agenda-files) when using ivy.
Creating another keybinding for org-occur-in-agenda-files is not necessary,
as it can be accessed with another existing keybinding ("SPC a o o /").
problem:
The following error messages are shown.
When trying to move, select or swap the current buffer,
to a window nr greater than the total number of open windows.
For example:
With only one window open.
`SPC b 2`
>ad-Advice-select-window: Wrong type argument: window-live-p, nil
In the Buffer Transient State (`SPC b .`):
- `C-2` (`spacemacs/buffer-transient-state/winum-select-window-2`)
>Wrong type argument: window-valid-p, #<window 12>
- `2` (`spacemacs/buffer-transient-state/move-buffer-window-no-follow-2`)
>Wrong type argument: window-live-p, #<window 14>
- `M-2` (`spacemacs/buffer-transient-state/swap-buffer-window-no-follow-2`)
>Wrong type argument: stringp, nil
Solution:
Show a descriptive message, if the target window nr is greater than the number
of open windows. And ignore the LV buffer (hydra).
