* jsdeliver url format changed from `<project>/<version>/file` to `npm/<project>@<version>/<file>` sometime in 2017.
The old urls still work, but they aren't getting updated.
* The current reveal.js version is 3.8.0
current CDN version: https://cdn.jsdelivr.net/npm/reveal.js@3.8.0
A space was added before the open parenthesis containing chinese characters, in
the section titles.
This solves a convention issue in the table of contents links (that are
generated from the titles), where the latin and chinese characters were next to
each other without a separating space.
When the space is added, then the generated links change the space to a dash.
A space was also added before any open parenthesis (with chinese characters) in
the non title text.
And a single full-width close parenthesis was changed to the half-width version
to match the other close parenthesis.
Thanks AmaiKinono for pointing out the issue.
Interrupt longer running evaluations without having to kill or reset the REPL
connection.
Placed in the evaluate section, as it is specific to the currently running
evaluation.
Added new key bindings:
- In the Buffer column:
Added "g" and "G":
[</g] beg
[>/G] end
- In a new Other column:
[q] quit
Reordered the columns:
From: Large to small: buffer, full page, half page, line/column
To: Small to large: line/column, half page, full page, buffer
Reason: The most used (first listed) bindings are probably not scroll to the
"beginning" or "end" of the buffer.
Rearranged the half page columns two instances of "down/up" to one "down" and
one "up".
Reduced the TS width:
- Separated the line/column and full page keys to one "down" and one "up", and
the buffer keys to one "beginning" and one "end".
- Renamed "beginning" to "beg".
Reordered the key bindings (TS) logically: "up" above "down".
Reordered the key bindings (code):
Arranged them in the same order as the columns in the TS.
Add a keybinding to provide a simple way to correct the spelling of a word at
the current point. This enables fixing the spelling mistake as it happens with
low ceremony.
This change fixes a syntax mistake in the use-package declaration of
ruby-test-mode that causes the package to be loaded immediately, instead of
deferring the load until the first ruby file is visited, as is intended.
Make fcitx.el work by default, it was not configured properly.
Added a layer variable to decide if dbus should be used or not:
chinese-fcitx-use-dbus
(default: nil)
Corrected README.org:
It's the dbus interface (not fcitx-remote) that is needed for linux.
Add relevant keybindings and documentation, including a setting
`js2-include-node-externs` as a configuration variable for those that intend to
use `Spacemacs` for node projects, as it currently seems to be mostly aimed at
pure JS (https://github.com/syl20bnr/spacemacs/issues/483).
When trying to complete a path at the `:e ` evil-ex-completion prompt by
pressing `TAB`.
Before: The default Emacs `*Completions*` buffer opens.
After: The `HELM Completion At Point` buffer opens.
And sorted the transient hooks alphabetically.
<<26/04/2019>>
Incorporated feedback from robbyoconnor and yyoncho.
Rebased.
<<08/04/2019>>
Rebased on develop tip
<<17/04/2019>>
Rebased
<<02/06/2019>>
Rebased. Incorporated feedback from duianto.
The key binding was changed in this commit:
javascript: change key binding for repl live eval toggle
8bc9060af8
This updates the documentation.
From: SPC m s a
To: SPC m T l
When counsel-dash is installed, but helm-dash isn't, startup error
(void-function dash-docs-installed-docsets) will be triggered.
Since common functionality of both counsel-dash and helm-dash was refactored
into dash-docs, a standalone package, the layer code was updated to use the
variables and functions from that package. This also fixed the mentioned error.
Currently, when a terminal is ended, its window is also closed. This behavior is
not satisfying to all. Thus a layer variable is added to give an option whether
to close window with terminal.
Problem:
`C-x w 0` calls `winum-select-window-0-or-10` which shows:
winum-select-window-by-number: No window numbered 10
Solution (Thanks Miciah):
Remap `winum-select-window-0-or-10` to the current filetree command:
`neotree-show` or `treemacs-select-window`
Then all three key bindings:
`C-x w 0`, `SPC 0` and `M-0` will call the same filetree command.
Additionally:
Renamed the remapped which-key name to the filetree command.
Wrapped lines to keep them under 80 chars.
This change will make buffers with the motion state
(e.g., spacemacs home buffer) be able to use the
evil-unimpaired navigation key bindings.
Note that the normal state will inherit the motion
state map anyway, so there's no need to set the
normal state map separately.
It is nicer when user can stay in the "home row" for basic operations like
zooming in and out
Font Scaling Transient State
`k` scale up
`j` scale down
Frame Transparency Transient State
`k` increase transparency
`j` decrease transparency
Zoom Frame Transient State
`k` zoom frame in
`j` zoom frame out
Added two additional Zoom Frame TS keys:
`m` max frame
`f` fullscreen
When writing documents in latex or any markup language there is soon or later
going to be unrecognized words that get falsely flagged as incorrect. These
functions and key-bindings allows the user to add unrecognized words to the
dictionary so they are recognized as correctly spelled words by ispell/flyspell.
This seem's like a must have feature for any application that does any kind of
spell checking.
Added key bindings:
SPC S a b for Add word to dict (buffer)
SPC S a g for Add word to dict (global)
SPC S a s for Add word to dict (session)
Spell Checking Transient State:
SPC S . B for Add word to dict (buffer)
SPC S . G for Add word to dict (global)
SPC S . S for Add word to dict (session)
Delete the hook that commit 9fcf8c898d added
to persp-created-functions, and change spacemacs/ivy-spacemacs-layouts,
spacemacs/helm-perspectives, spacemacs/helm-persp-switch-project, and
spacemacs/ivy-persp-switch-project to achieve the intended goal of adding
the desired buffers after creating a new perspective.
Change spacemacs/helm-persp-switch-project and
spacemacs/ivy-persp-switch-project as follows: If the user selects a
project but then quits without selecting a file or buffer, the new
perspective is now immediately killed. Otherwise, if the perspective did
not already exist, any buffers that belong to the selected project are
added to the perspective.
Add the following actions to spacemacs/ivy-spacemacs-layouts and
spacemacs/helm-perspectives:
* Create a new perspective with the Spacemacs home buffer (default action).
* Create a new perspective with the buffers that belong to the current
buffer's project.
* Create a new perspective with the buffers that belong to the current
perspective (i.e., make a copy of the current perspective).
This commit resolves the problem reported in
9fcf8c898d (commitcomment-33343455).
This commit also fixes a problem with the default action for
spacemacs/ivy-spacemacs-layouts and spacemacs/helm-perspectives. According to
commit 7b931a9f5b, the default action is supposed
to display the home buffer if the action creates a new perspective, which was
determined by checking whether the perspective was missing from the list of
perspectives _before_ switching. However, commit
eb7ca651fe changed this logic so it was checking
whether the perspective was missing from the list of perspectives _after_
switching. This commit restores the correct logic.
* CHANGELOG.develop: Update.
* layers/+completion/ivy/funcs.el (spacemacs/ivy-spacemacs-layouts): Add
"Copy Current Layout" and "Create Project Layout" actions to the docstring.
Use spacemacs//create-persp-with-home-buffer for the default action.
* layers/+completion/ivy/packages.el (ivy/post-init-persp-mode): Add
actions for spacemacs//create-persp-with-current-project-buffers and
persp-copy.
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs||switch-layout): New macro. Switch to the named perspective,
and initialize it using the provided forms if the perspective is new.
(spacemacs//create-persp-with-current-project-buffers): New function.
Create a new perspective with the current project's buffers.
(spacemacs||switch-project-persp): New macro. Switch to the named
perspective, and evaluate the provided forms with
projectile-after-switch-project-hook bound with a hook that adds the
current project's buffers to the perspective. If the user quits during the
evaluation of the forms, kill the perspective.
(spacemacs//create-persp-with-home-buffer): New function. Switch to the
named perspective, and go to the Spacemacs home buffer if the perspective
is new.
(spacemacs/helm-perspectives): Use spacemacs//create-persp-with-home-buffer
for the default action. Add actions for
spacemacs//create-persp-with-current-project-buffers and persp-copy.
(spacemacs//helm-persp-switch-project-action): New function. Switch to the
named perspective and call projectile-switch-project-by-name, using the new
spacemacs||switch-project-persp macro. Bind helm-quit-hook with a hook
that kills the new perspective if the user quits
projectile-switch-project-by-name.
(spacemacs/helm-persp-switch-project): Use
spacemacs//helm-persp-switch-project-action.
(spacemacs//ivy-persp-switch-project-action): New function. Switch to the
named perspective and call counsel-projectile-switch-project-action with a
hook to add the project's buffers to the new perspective.
(spacemacs/ivy-persp-switch-project): Delete advice for
counsel-projectile-switch-project-action. Use
spacemacs//ivy-persp-switch-project-action instead.
(spacemacs//add-project-buffers-to-persp): Deleted.
* layers/+spacemacs/spacemacs-layouts/packages.el
(spacemacs-layouts/init-persp-mode): Don't add a hook to
persp-created-functions.
Dune is a popular build-tool for OCaml projects, the `dune` package adds:
- Adds syntax highlighting
- Template insertion
- Some testing/compilation functions
