* gnu/bootloader/grub.scm (grub-minimal-bootloader): Use "define".
(grub-efi-bootloader): Use "define".
(grub-mkrescue-bootloader): Use "define".
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
This is a follow-up of 536c53d347, that do not
use the native version of "font-file", breaking cross-compilation.
* gnu/bootloader/grub.scm (eye-candy): Use the native version of "font-file".
* gnu/bootloaders/grub.scm (eye-candy): Use gfxterm depending only on
(bootloader-configuration (terminal-outputs …)), which defaults to '(gfxterm).
This makes the system argument obsolete.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Following discussion in <https://issues.guix.gnu.org/37305>, it seems more
appropriate to give the parameter a more generic name that better describes
what it does.
* gnu/bootloader/grub.scm (normalize-file): Rename the
BTRFS-SUBVOLUME-FILE-NAME parameter to STORE-DIRECTORY-PREFIX, and always
assume this argument to be a string.
(eye-candy): Likewise. Default STORE-DIRECTORY-PREFIX to "".
(grub-configuration-file): Likewise.
* gnu/system.scm (operating-system-bootcfg): Adapt.
* gnu/bootloader/grub.scm (install-grub): When creating a disk-image,
grub-install will fail because it lacks root permissions. In that case, do not
run grub-install and only copy Grub modules to the /boot directory.
* gnu/bootloader.scm (<bootloader>)[disk-image-installer]: New field,
(bootloader-disk-image-installer): export it.
* gnu/bootloader/grub.scm (install-grub-disk-image): New procedure ...
(grub-bootloader): ... used as "disk-image-installer" here.
(grub-efi-bootloader): set "disk-image-installer" to #f.
* gnu/system/image.scm (root-partition?, find-root-partition): Move to
"Helpers" section.
(root-partition-index): New procedure.
(system-disk-image): Honor disk-image-installer, and
use it to install the bootloader directly on the disk-image, if supported.
* gnu/bootloader/grub.scm (strip-mount-point): Remove procedure.
(normalize-file): Add procedure.
(grub-configuration-file): New BTRFS-SUBVOLUME-FILE-NAME parameter. When
defined, prepend its value to the kernel and initrd file names, using the
NORMALIZE-FILE procedure. Adjust the call to EYE-CANDY to pass the
BTRFS-SUBVOLUME-FILE-NAME argument. Normalize the KEYMAP file as well.
(eye-candy): Add a BTRFS-SUBVOLUME-FILE-NAME parameter, and use it, along with
the NORMALIZE-FILE procedure, to normalize the FONT-FILE and IMAGE nested
variables. Adjust doc.
* gnu/bootloader/depthcharge.scm (depthcharge-configuration-file): Adapt.
* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Likewise.
* gnu/system/file-systems.scm (btrfs-subvolume?)
(btrfs-store-subvolume-file-name): New procedures.
* gnu/system.scm (operating-system-bootcfg): Specify the Btrfs
subvolume file name the store resides on to the
`operating-system-bootcfg' procedure, using the new
BTRFS-SUBVOLUME-FILE-NAME argument.
* doc/guix.texi (File Systems): Add a Btrfs subsection to document the use of
subvolumes.
* gnu/tests/install.scm (%btrfs-root-on-subvolume-os)
(%btrfs-root-on-subvolume-os-source)
(%btrfs-root-on-subvolume-installation-script)
(%test-btrfs-root-on-subvolume-os): New variables.
* gnu/bootloaders/grub.scm (<grub-image>): Remove this record and replace it
by ...
(<grub-theme>)[image]: ... this field with the default from %background-image,
(<grub-theme>)[resolution]: ... this field with the defaults from 'width' and
'height' of 'grub-background-image'.
(<grub-theme>)[images]: Remove this field.
(svg->png): Rename to ...
(image->png): ... and use 'copy-file' instead of 'svg->png', if the suffix of
the image file is not ".svg".
(grub-background-image): Remove the arguments 'width' and 'height'.
(grub-theme-image): Add function.
(grub-theme-resolution): Add function.
(grub-theme-gfxmode): Add function.
(grub-image): Remove function.
(grub-image?): Remove function.
(grub-image-aspect-ratio): Remove function.
(grub-image-file): Remove function.
(grub-theme-images): Remove function.
(%default-theme): Remove variable.
(%background-image): Remove variable.
Using image formats different to SVG was not possible.
For a <grub-image> to be chosen, the 'aspect-ratio' of it had to be 4/3, as the
resolution of any image was defaulting to 1024 x 768.
There was no code to determine the proper boot-resolution to make any use of a
list of images with different aspect-ratios.
It seems to be a better solution to only define a single image with any format,
and use a given resolution only for the conversion from a SVG file. This also
makes the use of a special <grub-image> record unnecessary.
Moving the default values from '%background-image' and '%default-theme' into
<grub-theme> makes a customisation easier without (inherit) and allows to remove
the undocumented variables %background-image' and '%default-theme'.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/packages/bootloaders (u-boot-pinebook-pro-rk3399): New variable.
* gnu/packages/patches/u-boot-DT-for-Pinebook-Pro.patch: New file.
* gnu/packages/patches/u-boot-add-boe-nv140fhmn49-display.patch: New file.
* gnu/packages/patches/u-boot-gpio-keys-binding-cons.patch: New file.
* gnu/packages/patches/u-boot-leds-common-binding-con.patch: New file.
* gnu/packages/patches/u-boot-support-Pinebook-Pro-laptop.patch: New file.
* gnu/packages/patches/u-boot-video-rockchip-fix-build.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add new patches.
* gnu/bootloader/u-boot.scm (install-pinebook-pro-rk3399-u-boot,
u-boot-pinebook-pro-rk3399-bootloader): New variable.
Co-authored-by: Jan Nieuwenhuizen <janneke@gnu.org>
Reported by Florian Pelz <pelzflorian@pelzflorian.de>.
* gnu/bootloader/grub.scm (keyboard-layout-file): Replace commas with
hyphens in the first argument to 'computed-file'.
* gnu/system/keyboard.scm (keyboard-layout->console-keymap): Likewise.
* doc/guix.texi (Keyboard Layout): Add example.
* gnu/bootloader/grub.scm (eye-candy)[setup-gfxterm-body]: Define the GFXMODE
binding using AND-LET* instead of chained AND=>. Add a comment about
supporting graphical mode on other systems than x86. Generate configuration
string using FORMAT rather than STRING-APPEND.
In Guile < 2.9.7, autoloading a module would give you access to all its
bindings. In future versions, autoloading a module gives access only to
the listed bindings, as per #:select (see <https://bugs.gnu.org/38895>).
This commit adjusts autoloads to the new semantics, allowing Guix to be
built with Guile 2.9.7/2.9.8.
* guix/build/download.scm <top level>: Remove call to 'module-autoload!'.
(load-gnutls): New procedure.
(tls-wrap): Call it.
* guix/git.scm <top level>: Remove call to 'module-autoload!'.
(load-git-submodules): New procedure.
(update-submodules): Call it instead of 'resolve-interface'.
* gnu/bootloader/grub.scm: Replace #:autoload with #:use-module.
* gnu/packages.scm: Likewise.
* gnu/packages/ssh.scm: Likewise.
* gnu/packages/tex.scm: Likewise.
* gnu/services/cuirass.scm: Likewise.
* gnu/services/mcron.scm: Likewise.
* guix/lint.scm: Augment list of bindings in #:autoload.
* guix/scripts/build.scm: Likewise.
* guix/scripts/gc.scm: Likewise.
* guix/scripts/pack.scm: Likewise.
* guix/scripts/publish.scm: Likewise.
* guix/scripts/pull.scm: Likewise.
* guix/utils.scm: Remove unnecessary #:autoload clauses; replace one
of them with #:use-module.
* gnu/packages/bootloaders (u-boot-firefly-rk3399): New variable.
* gnu/bootloader/u-boot (install-firefly-rk3399-u-boot): New variable.
(u-boot-firefly-rk3399-bootloader): New variable.
* gnu/system/install (define firefly-rk3399-installation-os): New variable.
* gnu/packages/bootloaders (u-boot-rock64-rk3328): New variable.
* gnu/bootloader/u-boot (install-rock64-rk3328-u-boot): New variable.
(u-boot-rock64-rk3328-bootloader): New variable.
* gnu/system/install (define rock64-installation-os): New variable.
Fixes <https://bugs.gnu.org/35585>.
Reported by Florian Pelz <pelzflorian@pelzflorian.de>.
This statement was added in 8d058e7b1b but
turned out to be unnecessary.
* gnu/bootloader/grub.scm (grub-configuration-file): Remove
'terminal_output' statement.
* gnu/bootloader/grub.scm (keyboard-layout-file): New procedure.
(grub-configuration-file)[keyboard-layout-file]: New variable.
[builder]: Use it.
* gnu/bootloader.scm (<bootloader-configuration>)[keyboard-layout]: New
field.
* doc/guix.texi (Bootloader Configuration): Document it.
Co-authored-by: nee <nee-git@hidamari.blue>
This hides potentially confusing GRUB messages from the user, such as
"Installing for i386-pc platform."
* gnu/bootloader/extlinux.scm (install-extlinux): Use 'invoke/quiet'
instead of 'system*' and 'error'.
* gnu/bootloader/grub.scm (install-grub, install-grub-efi): Likewise.
* guix/scripts/system.scm (bootloader-installer-script): Guard against
'message-condition?' and handle them properly.
* gnu/bootloader/grub.scm (svg->png): Use 'with-extensions'. Remove
'add-to-load-path' calls.
* gnu/build/svg.scm: Use (rsvg) and (cairo) the normal way. Remove
'module-autoload!' calls.
* gnu/packages/bootloaders.scm (u-boot-puma-rk3399): New variable.
(make-u-boot-package)[arguments]: Add '.rksd' files to the files installed
during custom 'install phase.
* gnu/bootloader/u-boot.scm (u-boot-puma-rk3399-bootloader):
New exported variable.
* gnu/system/install.scm (rk3399-puma-installation-os):
New exported variable.
* gnu/packages/firmware.scm (arm-trusted-firmware-puma-rk3399): New variable.
(rk3399-cortex-m0): New variable.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
The 'title' field was easily overlooked and was an endless source of
confusion. Now, the value of the 'device' field is self-contained.
* gnu/system/file-systems.scm (<file-system>): Change constructor name
to '%file-system'.
[title]: Remove.
(<file-system-label>): New record type with printer.
(report-deprecation, device-expression)
(process-file-system-declaration, file-system): New macros.
(file-system-title): New procedure.
(file-system->spec, spec->file-system): Adjust to handle
<file-system-label>.
* gnu/system.scm (bootable-kernel-arguments): Add case for
'file-system-label?'.
(read-boot-parameters): Likewise.
(mapped-device-user): Avoid 'file-system-title'.
(fs->boot-device): Remove.
(operating-system-boot-parameters): Use 'file-system-device' instead of
'fs->boot-device'.
(device->sexp): Add case for 'file-system-label?'.
* gnu/bootloader/grub.scm (grub-root-search): Add case for
'file-system-label?'.
* gnu/system/examples/bare-bones.tmpl,
gnu/system/examples/beaglebone-black.tmpl,
gnu/system/examples/lightweight-desktop.tmpl,
gnu/system/examples/vm-image.tmpl: Remove uses of 'title'.
* gnu/system/vm.scm (virtualized-operating-system): Remove uses of
'file-system-title'.
* guix/scripts/system.scm (check-file-system-availability): Likewise,
and adjust fix-it hint.
(check-initrd-modules)[file-system-/dev]: Likewise.
* gnu/build/file-systems.scm (canonicalize-device-spec): Remove 'title'
parameter.
[canonical-title]: Remove.
Match on SPEC's type rather than on CANONICAL-TITLE.
(mount-file-system): Adjust caller.
* gnu/build/linux-boot.scm (boot-system): Interpret ROOT here.
* gnu/services/base.scm (file-system->fstab-entry): Remove use of
'file-system-title'.
* doc/guix.texi (File Systems): Remove documentation of the 'title'
field. Rewrite documentation of 'device' and document
'file-system-label'.
* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Set MENU TITLE in
generated extlinux.conf.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
