It reads uninitialized values, so it was barely functional before
morph_data became a dynamic allocation, and it is broken now. Disable
it to avoid crashing the game. The demo code should have initialized
the morph_data structure properly, but does not.
Reported-by: tycho <https://github.com/dxx-rebirth/dxx-rebirth/issues/496>
Fixes: cac5f1da56 ("Move morph_data into dynamic allocations")
When building with AddressSanitizer, gcc warns that `i` may not fit,
because the compiler fails to adequately constrain the possible values
for `i`. Add a control-flow hint to inform gcc about valid values.
These variables are used, but optimized builds eliminate all reference
to their address, so the build normally succeeds. Unoptimized builds
retain references to the address, so a definition is required for them.
Reported-by: tycho <https://github.com/dxx-rebirth/dxx-rebirth/issues/496>
Fixes: 595c3ca086 ("Move Boss_cloak_interval to d_level_shared_boss_state")
Fixes: c61dee7e6a ("Move Boss_teleport_interval to d_level_shared_boss_state")
Returning from a secret level clears the player's `hostages_on_board` to
0 as part of initializing a "new" ship, but this is not desirable
behavior. Copy the counter out before and back afterward.
```
Thread 1 "d2x-rebirth-edi" hit Hardware watchpoint 1: -location d2x::LevelUniqueObjectState.Objects._M_elems[0].ctype.player_info.mission.hostages_on_board
Old value = 5 '\005'
New value = 0 '\000'
#0 d2x::init_player_stats_ship (GameTime64=<optimized out>, plrobj=...) at similar/main/gameseq.cpp:613
#1 d2x::init_player_stats_level (secret_flag=d2x::secret_restore::survived, plrobj=..., plr=...) at similar/main/gameseq.cpp:615
#2 d2x::StartNewLevelSub (level_num=level_num@entry=3, page_in_textures=page_in_textures@entry=1, secret_flag=secret_flag@entry=d2x::secret_restore::survived) at similar/main/gameseq.cpp:1901
#3 d2x::state_restore_all_sub (LevelSharedDestructibleLightState=..., secret=d2x::secret_restore::survived, filename=<optimized out>) at similar/main/state.cpp:1670
#4 d2x::state_restore_all (in_game=in_game@entry=1, secret=secret@entry=d2x::secret_restore::survived, filename_override=<optimized out>, blind=blind@entry=dcx::blind_save::no) at similar/main/state.cpp:1490
#5 d2x::ExitSecretLevel ()
```
Reported-by: teratorn <https://github.com/dxx-rebirth/dxx-rebirth/issues/495>
gcc before gcc-7 failed to build valptridx:
```
common/include/valptridx.h: In instantiation of 'valptridx<managed_type>::ptridx<policy>::ptridx(const valptridx<managed_type>::ptridx<rpolicy>&) [with rpolicy =
valptridx<dcx::segment>::vm; typename std::enable_if<(policy:: allow_nullptr || (! rpolicy:: allow_nullptr)), int>::type <anonymous> = 0; policy = valptridx<dcx::segment>::vc; managed_type = dcx::segment]':
similar/main/endlevel.cpp:586:105: required from here
common/include/valptridx.h:686:14: error: 'using vptr_type = class valptridx<dcx::segment>::ptr<valptridx<dcx::segment>::vm>' is protected within this context
vptr_type(static_cast<const typename ptridx<rpolicy>::vptr_type &>(rhs)),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
common/include/valptridx.h:666:31: note: declared protected here
using vptr_type = ptr<policy>;
```
This cannot be fixed in the obvious way because the error message is
wrong:
```
664 using containing_type = valptridx<managed_type>;
665 public:
666 using vptr_type = ptr<policy>;
667 using vidx_type = idx<policy>;
668 using typename vidx_type::array_managed_type;
```
The type declarations _already are_ *public*, not *protected* as the
message states. Relaxing the protection on the containing class
resolves the error. This looks bad from an encapsulation perspective,
but does not make the code incorrect.
Commit d879fc7f6b changed the type of `newpath` and updated all uses
in common code. A Windows-only block was skipped. Update that now.
Fixes: d879fc7f6b ("Convert file selection to use array<char, N>, not char[N]")
When presented with an overlong string, throw std::runtime_error instead
of corrupting memory. Either way, the result is a crash, but this crash
is safe, deterministic, and probably easier to debug.
The historical savegame format cannot support finding a mission in a
subdirectory. Add a backwards-incompatible modification to store the
full path in the savegame, and store it in a way that old versions will
fail gracefully.[1] When loading demos, or legacy savegames, search for
the mission in all available directories. Demos are still written with
an unqualified path because the demo loading code would crash if given
an oversized path. Mission names sent over the network as part of
multiplayer use the guess logic now, so that guests do not need to have
the mission in the same path as the host.
[1] Versions affected by issue #486 may fail ungracefully.
Reported-by: AlumiuN <https://github.com/dxx-rebirth/dxx-rebirth/issues/491>
- In D2X, do not accept Descent2-specific directives from Descent 1
`.msn` files.
- Set the descent_version field correctly in the `mle`. Previously,
`.msn` was set to descent1 and all `.mn2` were set to descent2,
regardless of whether the `.mn2` used `name`, `xname`, `zname`, or
`!name`.
- Avoid rewinding the file and rereading the same line while checking
the possible name types.
- Avoid recomputing end-of-string when it is already known.
- Avoid re-reading the mission file's version when the mission is
chosen. Instead, use the version that was recorded when the mission
was loaded into the mission list. This also fixes a bug where Descent
1 `.msn` files would be classified as descent_version_type::descent2
since both use `name =`, but that string has a different meaning
depending on whether the file is `.msn` or `.mn2`.
Some levels have robots with n_joints=0 and an invalid offset. If the
number of joints is zero, the offset is irrelevant. Reset it to 0, so
that a later call to partial_range will not trap.
Reported-by: kakhome1 <https://github.com/dxx-rebirth/dxx-rebirth/issues/485>
TORRaven reported an issue where `Descent: First Strike` level 4 in
cooperative games would cause the player 0 ship to be unable to move.
On investigation, this occurs when the host has enabled extra player
starts, and the resulting synthesis of new player start positions moves
the player 0 start out of its origin segment. The physics engine reacts
poorly to this situation, causing the object to be unable to move and to
report HIT_BAD_P0 in debug builds. Add a test to cancel the
displacement if get_seg_masks reports that the center point would move
outside the origin segment. More clever logic might be appropriate, but
since this is the first report of problems with the feature since its
introduction in 5a64ee5132, this commit just eliminates the
immediate problem. Possible future improvements if the existing
displacement causes collisions:
- Reduce the magnitude of the existing displacement, instead of
abandoning it entirely.
- Move the player start to the segment's center before displacing it.
- Add logic to move the player into a nearby logically connected
segment.
Reported-by: TORRaven <https://github.com/dxx-rebirth/dxx-rebirth/issues/483>
Fixes: 5a64ee5132 ("Add experimental support for larger cooperative games")
AlumiuN reported a crash when a save game is unable to load the
underlying mission. The crash is because the game proceeds to load the
savegame onto whatever level was loaded before this mission, which will
usually result in fatal inconsistencies in the data.
This commit does not fix the cause of the inability to load the mission,
but instead fixes the logic so that the user gets a reasonable error
message advising that the mission failed to load. This was
unintentionally broken in db80a88ad2 when the sense of the return
value was inverted, and the fallthrough case was not adjusted. This
impacts all uses of `load_mission_by_name`, though in practice restoring
from a savegame is the most obvious way to hit the problem.
Reported-by: AlumiuN <https://github.com/dxx-rebirth/dxx-rebirth/issues/486> (indirectly)
Fixes: db80a88ad2 ("Improve error message on failure to load mission")
arch_close calls various library shutdown routines, some of which may
not be in good order after atexit hooks begin executing. Call it before
returning from main, so that the libraries are still fully initialized.
In exported archives, the commit will be
`archive-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx` for some hexadecimal
characters `x`. `-` is not valid in a C identifier, but the commit
needs to be a valid C identifier. Change `-` to `_` so that it will be
valid.
Reported-by: andrew-strong <https://github.com/dxx-rebirth/dxx-rebirth/issues/484>
Fixes: fafa07a456 ("Instruct git-archive to insert a commit ID in SConstruct")
Python 2 byte sequences look best when not decoded. Python 3 byte
sequences look best when decoded. As Python 2 is near end of life and
most distributions have moved on to Python 3, switch to the style that
looks better in Python 3. The code still runs in Python 2, but produces
a u'' wrapper around the text because the type is `unicode` in Python 2,
but `str` in Python 3. This change eliminates the b'' wrapper around
the text in Python 3.
Extended identifiers have proved to cause more problems than they solve.
Switch to base32 which, while less commonly supported, is available in
Python and uses an alphabet that is almost a subset of the C identifier
alphabet. Padding characters are still a problem, but can be remapped
to a valid C identifier that is not a valid base32 character.