4a5e68f4f2
MCU Pins for debugging, LED, boot tracing, and shift registers are now configurable at keyboard level. Macros led_* replaced by DBG_LED_* Macros m15_* replaced by DBG_1_* Macros m27_* replaced by DBG_2_* Macros m28_* replaced by DBG_3_* For CTRL and ALT keyboards, debug boot tracing pin default now set to pad M27 instead of M28 since although M28 is not being used, it is technically a signal for USB port detection. m15_print(...) renamed to dbg_print(...) to get away from hard coded port names. dbg_print function now follows similar pattern to debug led output.
87 lines
3.3 KiB
C
87 lines
3.3 KiB
C
/*
|
|
Copyright 2018 Massdrop Inc.
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "arm_atsam_protocol.h"
|
|
|
|
sr_exp_t sr_exp_data;
|
|
|
|
void SR_EXP_WriteData(void)
|
|
{
|
|
SR_EXP_RCLK_LO;
|
|
|
|
while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.DRE)) { DBGC(DC_SPI_WRITE_DRE); }
|
|
|
|
SR_EXP_SERCOM->SPI.DATA.bit.DATA = sr_exp_data.reg & 0xFF; //Shift in bits 7-0
|
|
while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.TXC)) { DBGC(DC_SPI_WRITE_TXC_1); }
|
|
|
|
SR_EXP_SERCOM->SPI.DATA.bit.DATA = (sr_exp_data.reg >> 8) & 0xFF; //Shift in bits 15-8
|
|
while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.TXC)) { DBGC(DC_SPI_WRITE_TXC_2); }
|
|
|
|
SR_EXP_RCLK_HI;
|
|
}
|
|
|
|
void SR_EXP_Init(void)
|
|
{
|
|
DBGC(DC_SPI_INIT_BEGIN);
|
|
|
|
CLK_set_spi_freq(CHAN_SERCOM_SPI, FREQ_SPI_DEFAULT);
|
|
|
|
//Set up MCU Shift Register pins
|
|
PORT->Group[SR_EXP_RCLK_PORT].DIRSET.reg = (1 << SR_EXP_RCLK_PIN);
|
|
PORT->Group[SR_EXP_OE_N_PORT].DIRSET.reg = (1 << SR_EXP_OE_N_PIN);
|
|
|
|
//Set up MCU SPI pins
|
|
PORT->Group[SR_EXP_DATAOUT_PORT].PMUX[SR_EXP_DATAOUT_PIN / 2].bit.SR_EXP_DATAOUT_MUX_SEL = SR_EXP_DATAOUT_MUX; //MUX select for sercom
|
|
PORT->Group[SR_EXP_SCLK_PORT].PMUX[SR_EXP_SCLK_PIN / 2].bit.SR_EXP_SCLK_MUX_SEL = SR_EXP_SCLK_MUX; //MUX select for sercom
|
|
PORT->Group[SR_EXP_DATAOUT_PORT].PINCFG[SR_EXP_DATAOUT_PIN].bit.PMUXEN = 1; //MUX Enable
|
|
PORT->Group[SR_EXP_SCLK_PORT].PINCFG[SR_EXP_SCLK_PIN].bit.PMUXEN = 1; //MUX Enable
|
|
|
|
//Initialize Shift Register
|
|
SR_EXP_OE_N_DIS;
|
|
SR_EXP_RCLK_HI;
|
|
|
|
SR_EXP_SERCOM->SPI.CTRLA.bit.DORD = 1; //Data Order - LSB is transferred first
|
|
SR_EXP_SERCOM->SPI.CTRLA.bit.CPOL = 1; //Clock Polarity - SCK high when idle. Leading edge of cycle is falling. Trailing rising.
|
|
SR_EXP_SERCOM->SPI.CTRLA.bit.CPHA = 1; //Clock Phase - Leading Edge Falling, change, Trailing Edge - Rising, sample
|
|
SR_EXP_SERCOM->SPI.CTRLA.bit.DIPO = 3; //Data In Pinout - SERCOM PAD[3] is used as data input (Configure away from DOPO. Not using input.)
|
|
SR_EXP_SERCOM->SPI.CTRLA.bit.DOPO = 0; //Data Output PAD[0], Serial Clock PAD[1]
|
|
SR_EXP_SERCOM->SPI.CTRLA.bit.MODE = 3; //Operating Mode - Master operation
|
|
|
|
SR_EXP_SERCOM->SPI.CTRLA.bit.ENABLE = 1; //Enable - Peripheral is enabled or being enabled
|
|
while (SR_EXP_SERCOM->SPI.SYNCBUSY.bit.ENABLE) { DBGC(DC_SPI_SYNC_ENABLING); }
|
|
|
|
sr_exp_data.reg = 0;
|
|
sr_exp_data.bit.HUB_CONNECT = 0;
|
|
sr_exp_data.bit.HUB_RESET_N = 0;
|
|
sr_exp_data.bit.S_UP = 0;
|
|
sr_exp_data.bit.E_UP_N = 1;
|
|
sr_exp_data.bit.S_DN1 = 1;
|
|
sr_exp_data.bit.E_DN1_N = 1;
|
|
sr_exp_data.bit.E_VBUS_1 = 0;
|
|
sr_exp_data.bit.E_VBUS_2 = 0;
|
|
sr_exp_data.bit.SRC_1 = 1;
|
|
sr_exp_data.bit.SRC_2 = 1;
|
|
sr_exp_data.bit.IRST = 1;
|
|
sr_exp_data.bit.SDB_N = 0;
|
|
SR_EXP_WriteData();
|
|
|
|
//Enable Shift Register output
|
|
SR_EXP_OE_N_ENA;
|
|
|
|
DBGC(DC_SPI_INIT_COMPLETE);
|
|
}
|
|
|