b05c0e46c6
* Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition
111 lines
3.3 KiB
C
111 lines
3.3 KiB
C
/*
|
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef CONFIG_H
|
|
#define CONFIG_H
|
|
|
|
#include "config_common.h"
|
|
|
|
/* USB Device descriptor parameter */
|
|
#define VENDOR_ID 0xFEED
|
|
#define PRODUCT_ID 0xCAFE
|
|
#define DEVICE_VER 0x0104
|
|
#define MANUFACTURER q.m.k
|
|
#define PRODUCT HHKB mod
|
|
#define DESCRIPTION q.m.k keyboard firmware for HHKB
|
|
|
|
/* key matrix size */
|
|
#ifdef HHKB_JP
|
|
# define MATRIX_ROWS 16
|
|
#else
|
|
# define MATRIX_ROWS 8
|
|
#endif
|
|
#define MATRIX_COLS 8
|
|
|
|
#define TAPPING_TERM 200
|
|
|
|
/* number of backlight levels */
|
|
#define BACKLIGHT_LEVELS 3
|
|
|
|
/* Set 0 if debouncing isn't needed */
|
|
#define DEBOUNCE 5
|
|
|
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
//#define LOCKING_SUPPORT_ENABLE
|
|
/* Locking resynchronize hack */
|
|
//#define LOCKING_RESYNC_ENABLE
|
|
|
|
#ifdef HHKB_RN42_ENABLE
|
|
// rn42 support -- acquired from the tmk repo. This is almost certainly not
|
|
// integrated with qmk in the correct way.
|
|
|
|
#define SUART_OUT_PORT PORTD
|
|
#define SUART_OUT_BIT 0
|
|
#define SUART_IN_PIN PIND
|
|
#define SUART_IN_BIT 1
|
|
|
|
#ifdef __AVR_ATmega32U4__
|
|
/* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */
|
|
#define UCSR1D _SFR_MEM8(0xCB)
|
|
#define RTSEN 0
|
|
#define CTSEN 1
|
|
|
|
#define SERIAL_UART_BAUD 115200
|
|
#define SERIAL_UART_DATA UDR1
|
|
#define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
|
|
#define SERIAL_UART_RXD_VECT USART1_RX_vect
|
|
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
|
|
#define SERIAL_UART_INIT() do { \
|
|
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
|
|
UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8); /* baud rate */ \
|
|
UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
|
|
UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
|
|
UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \
|
|
UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS(no flow control by hardware) */ \
|
|
DDRD |= (1<<5); PORTD &= ~(1<<5); /* RTS for flow control by firmware */ \
|
|
sei(); \
|
|
} while(0)
|
|
#define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0)
|
|
#define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0)
|
|
#else
|
|
#error "USART configuration is needed."
|
|
#endif
|
|
|
|
/* power control of key switch board */
|
|
#define HHKB_POWER_SAVING
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Feature disable options
|
|
* These options are also useful to firmware size reduction.
|
|
*/
|
|
|
|
/* disable debug print */
|
|
//#define NO_DEBUG
|
|
|
|
/* disable print */
|
|
//#define NO_PRINT
|
|
|
|
/* disable action features */
|
|
//#define NO_ACTION_LAYER
|
|
//#define NO_ACTION_TAPPING
|
|
//#define NO_ACTION_ONESHOT
|
|
//#define NO_ACTION_MACRO
|
|
//#define NO_ACTION_FUNCTION
|
|
|
|
#endif
|