skylark-qmk/keyboards/ergotaco/ergotaco.h
Jeremy Bernhardt 8fa9f67256 [Keyboard] ErgoTaco Support (#5504)
* ErgoTaco support

* Update keyboards/ergotaco/ergotaco.h

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/ergotaco/keymaps/default/keymap.c

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/ergotaco/keymaps/default/keymap.c

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/ergotaco/readme.md

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/ergotaco/readme.md

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/ergotaco/rules.mk

Co-Authored-By: germ <jeremythegeek@gmail.com>

* juggling rules.mk

* Update keyboards/ergotaco/rules.mk

Co-Authored-By: germ <jeremythegeek@gmail.com>

* updating IS_COMMAND

* learning2english


Meme-tastic --Drashna
2019-03-29 10:39:28 -07:00

50 lines
1.6 KiB
C

#pragma once
#include <util/delay.h>
#include <stdint.h>
#include <stdbool.h>
#include "quantum.h"
#include "i2c_master.h"
#include "matrix.h"
extern i2c_status_t mcp23018_status;
#define ERGODOX_EZ_I2C_TIMEOUT 1000
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define CPU_16MHz 0x00
// I2C aliases and register addresses (see "mcp23018.md")
//#define I2C_ADDR 0b0100000
#define I2C_ADDR 0x20
#define I2C_ADDR_WRITE ( (I2C_ADDR<<1) | I2C_WRITE )
#define I2C_ADDR_READ ( (I2C_ADDR<<1) | I2C_READ )
#define IODIRA 0x00 // i/o direction register
#define IODIRB 0x01
#define GPPUA 0x0C // GPIO pull-up resistor register
#define GPPUB 0x0D
#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT)
#define GPIOB 0x13
#define OLATA 0x14 // output latch register
#define OLATB 0x15
void init_ergodox(void);
uint8_t init_mcp23018(void);
/* ---------- LEFT HAND ----------- ---------- RIGHT HAND ---------- */
#define LAYOUT( \
L00,L01,L02,L03,L04,L05, R00,R01,R02,R03,R04,R05) \
\
/* matrix positions */ \
{ \
{R00}, \
{R01}, \
{R02}, \
{R03}, \
{R04}, \
{R05}, \
{L05}, \
{L04}, \
{L03}, \
{L02}, \
{L01}, \
{L00}, \
}