skylark-qmk/keyboards/edda
2023-04-05 15:50:56 +10:00
..
keymaps
config.h
edda.c Move Alice and Ergodox layouts to data driven (#20340) 2023-04-05 15:50:56 +10:00
info.json Move Alice and Ergodox layouts to data driven (#20340) 2023-04-05 15:50:56 +10:00
readme.md
rules.mk

Edda PCB

Alice layout PCB with top mounted USB C used in Mekanisk Edda

Make example for this keyboard (after setting up your build environment):

make edda:default

Flashing example for this keyboard:

make edda:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, disconnect the keyboard from your PC and reconnect it.