c66df16644
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
417 lines
15 KiB
C
417 lines
15 KiB
C
/* Copyright 2015-2018 Jack Humbert
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
/* diode directions */
|
|
#define COL2ROW 0
|
|
#define ROW2COL 1
|
|
|
|
// useful for direct pin mapping
|
|
#define NO_PIN (pin_t)(~0)
|
|
|
|
#ifdef __AVR__
|
|
# ifndef __ASSEMBLER__
|
|
# include <avr/io.h>
|
|
# endif
|
|
# define PORT_SHIFTER 4 // this may be 4 for all AVR chips
|
|
|
|
// If you want to add more to this list, reference the PINx definitions in these header
|
|
// files: https://github.com/vancegroup-mirrors/avr-libc/tree/master/avr-libc/include/avr
|
|
|
|
# if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__)
|
|
# define ADDRESS_BASE 0x00
|
|
# define PINB_ADDRESS 0x3
|
|
# define PINC_ADDRESS 0x6
|
|
# define PIND_ADDRESS 0x9
|
|
# define PINE_ADDRESS 0xC
|
|
# define PINF_ADDRESS 0xF
|
|
# elif defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
|
|
# define ADDRESS_BASE 0x00
|
|
# define PINB_ADDRESS 0x3
|
|
# define PINC_ADDRESS 0x6
|
|
# define PIND_ADDRESS 0x9
|
|
# elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
|
|
# define ADDRESS_BASE 0x00
|
|
# define PINA_ADDRESS 0x0
|
|
# define PINB_ADDRESS 0x3
|
|
# define PINC_ADDRESS 0x6
|
|
# define PIND_ADDRESS 0x9
|
|
# define PINE_ADDRESS 0xC
|
|
# define PINF_ADDRESS 0xF
|
|
# elif defined(__AVR_ATmega32A__)
|
|
# define ADDRESS_BASE 0x10
|
|
# define PIND_ADDRESS 0x0
|
|
# define PINC_ADDRESS 0x3
|
|
# define PINB_ADDRESS 0x6
|
|
# define PINA_ADDRESS 0x9
|
|
# elif defined(__AVR_ATtiny85__)
|
|
# define ADDRESS_BASE 0x10
|
|
# define PINB_ADDRESS 0x6
|
|
# else
|
|
# error "Pins are not defined"
|
|
# endif
|
|
|
|
/* I/O pins */
|
|
# define PINDEF(port, pin) ((PIN##port##_ADDRESS << PORT_SHIFTER) | pin)
|
|
|
|
# ifdef PORTA
|
|
# define A0 PINDEF(A, 0)
|
|
# define A1 PINDEF(A, 1)
|
|
# define A2 PINDEF(A, 2)
|
|
# define A3 PINDEF(A, 3)
|
|
# define A4 PINDEF(A, 4)
|
|
# define A5 PINDEF(A, 5)
|
|
# define A6 PINDEF(A, 6)
|
|
# define A7 PINDEF(A, 7)
|
|
# endif
|
|
# ifdef PORTB
|
|
# define B0 PINDEF(B, 0)
|
|
# define B1 PINDEF(B, 1)
|
|
# define B2 PINDEF(B, 2)
|
|
# define B3 PINDEF(B, 3)
|
|
# define B4 PINDEF(B, 4)
|
|
# define B5 PINDEF(B, 5)
|
|
# define B6 PINDEF(B, 6)
|
|
# define B7 PINDEF(B, 7)
|
|
# endif
|
|
# ifdef PORTC
|
|
# define C0 PINDEF(C, 0)
|
|
# define C1 PINDEF(C, 1)
|
|
# define C2 PINDEF(C, 2)
|
|
# define C3 PINDEF(C, 3)
|
|
# define C4 PINDEF(C, 4)
|
|
# define C5 PINDEF(C, 5)
|
|
# define C6 PINDEF(C, 6)
|
|
# define C7 PINDEF(C, 7)
|
|
# endif
|
|
# ifdef PORTD
|
|
# define D0 PINDEF(D, 0)
|
|
# define D1 PINDEF(D, 1)
|
|
# define D2 PINDEF(D, 2)
|
|
# define D3 PINDEF(D, 3)
|
|
# define D4 PINDEF(D, 4)
|
|
# define D5 PINDEF(D, 5)
|
|
# define D6 PINDEF(D, 6)
|
|
# define D7 PINDEF(D, 7)
|
|
# endif
|
|
# ifdef PORTE
|
|
# define E0 PINDEF(E, 0)
|
|
# define E1 PINDEF(E, 1)
|
|
# define E2 PINDEF(E, 2)
|
|
# define E3 PINDEF(E, 3)
|
|
# define E4 PINDEF(E, 4)
|
|
# define E5 PINDEF(E, 5)
|
|
# define E6 PINDEF(E, 6)
|
|
# define E7 PINDEF(E, 7)
|
|
# endif
|
|
# ifdef PORTF
|
|
# define F0 PINDEF(F, 0)
|
|
# define F1 PINDEF(F, 1)
|
|
# define F2 PINDEF(F, 2)
|
|
# define F3 PINDEF(F, 3)
|
|
# define F4 PINDEF(F, 4)
|
|
# define F5 PINDEF(F, 5)
|
|
# define F6 PINDEF(F, 6)
|
|
# define F7 PINDEF(F, 7)
|
|
# endif
|
|
|
|
# ifndef __ASSEMBLER__
|
|
# define _PIN_ADDRESS(p, offset) _SFR_IO8(ADDRESS_BASE + ((p) >> PORT_SHIFTER) + (offset))
|
|
// Port X Input Pins Address
|
|
# define PINx_ADDRESS(p) _PIN_ADDRESS(p, 0)
|
|
// Port X Data Direction Register, 0:input 1:output
|
|
# define DDRx_ADDRESS(p) _PIN_ADDRESS(p, 1)
|
|
// Port X Data Register
|
|
# define PORTx_ADDRESS(p) _PIN_ADDRESS(p, 2)
|
|
# endif
|
|
|
|
#elif defined(PROTOCOL_CHIBIOS)
|
|
// Defines mapping for Proton C replacement
|
|
# ifdef CONVERT_TO_PROTON_C
|
|
// Left side (front)
|
|
# define D3 PAL_LINE(GPIOA, 9)
|
|
# define D2 PAL_LINE(GPIOA, 10)
|
|
// GND
|
|
// GND
|
|
# define D1 PAL_LINE(GPIOB, 7)
|
|
# define D0 PAL_LINE(GPIOB, 6)
|
|
# define D4 PAL_LINE(GPIOB, 5)
|
|
# define C6 PAL_LINE(GPIOB, 4)
|
|
# define D7 PAL_LINE(GPIOB, 3)
|
|
# define E6 PAL_LINE(GPIOB, 2)
|
|
# define B4 PAL_LINE(GPIOB, 1)
|
|
# define B5 PAL_LINE(GPIOB, 0)
|
|
|
|
// Right side (front)
|
|
// RAW
|
|
// GND
|
|
// RESET
|
|
// VCC
|
|
# define F4 PAL_LINE(GPIOA, 2)
|
|
# define F5 PAL_LINE(GPIOA, 1)
|
|
# define F6 PAL_LINE(GPIOA, 0)
|
|
# define F7 PAL_LINE(GPIOB, 8)
|
|
# define B1 PAL_LINE(GPIOB, 13)
|
|
# define B3 PAL_LINE(GPIOB, 14)
|
|
# define B2 PAL_LINE(GPIOB, 15)
|
|
# define B6 PAL_LINE(GPIOB, 9)
|
|
|
|
// LEDs (only D5/C13 uses an actual LED)
|
|
# ifdef CONVERT_TO_PROTON_C_RXLED
|
|
# define D5 PAL_LINE(GPIOC, 14)
|
|
# define B0 PAL_LINE(GPIOC, 13)
|
|
# else
|
|
# define D5 PAL_LINE(GPIOC, 13)
|
|
# define B0 PAL_LINE(GPIOC, 14)
|
|
# endif
|
|
# else
|
|
# define A0 PAL_LINE(GPIOA, 0)
|
|
# define A1 PAL_LINE(GPIOA, 1)
|
|
# define A2 PAL_LINE(GPIOA, 2)
|
|
# define A3 PAL_LINE(GPIOA, 3)
|
|
# define A4 PAL_LINE(GPIOA, 4)
|
|
# define A5 PAL_LINE(GPIOA, 5)
|
|
# define A6 PAL_LINE(GPIOA, 6)
|
|
# define A7 PAL_LINE(GPIOA, 7)
|
|
# define A8 PAL_LINE(GPIOA, 8)
|
|
# define A9 PAL_LINE(GPIOA, 9)
|
|
# define A10 PAL_LINE(GPIOA, 10)
|
|
# define A11 PAL_LINE(GPIOA, 11)
|
|
# define A12 PAL_LINE(GPIOA, 12)
|
|
# define A13 PAL_LINE(GPIOA, 13)
|
|
# define A14 PAL_LINE(GPIOA, 14)
|
|
# define A15 PAL_LINE(GPIOA, 15)
|
|
# define B0 PAL_LINE(GPIOB, 0)
|
|
# define B1 PAL_LINE(GPIOB, 1)
|
|
# define B2 PAL_LINE(GPIOB, 2)
|
|
# define B3 PAL_LINE(GPIOB, 3)
|
|
# define B4 PAL_LINE(GPIOB, 4)
|
|
# define B5 PAL_LINE(GPIOB, 5)
|
|
# define B6 PAL_LINE(GPIOB, 6)
|
|
# define B7 PAL_LINE(GPIOB, 7)
|
|
# define B8 PAL_LINE(GPIOB, 8)
|
|
# define B9 PAL_LINE(GPIOB, 9)
|
|
# define B10 PAL_LINE(GPIOB, 10)
|
|
# define B11 PAL_LINE(GPIOB, 11)
|
|
# define B12 PAL_LINE(GPIOB, 12)
|
|
# define B13 PAL_LINE(GPIOB, 13)
|
|
# define B14 PAL_LINE(GPIOB, 14)
|
|
# define B15 PAL_LINE(GPIOB, 15)
|
|
# define B16 PAL_LINE(GPIOB, 16)
|
|
# define B17 PAL_LINE(GPIOB, 17)
|
|
# define B18 PAL_LINE(GPIOB, 18)
|
|
# define B19 PAL_LINE(GPIOB, 19)
|
|
# define C0 PAL_LINE(GPIOC, 0)
|
|
# define C1 PAL_LINE(GPIOC, 1)
|
|
# define C2 PAL_LINE(GPIOC, 2)
|
|
# define C3 PAL_LINE(GPIOC, 3)
|
|
# define C4 PAL_LINE(GPIOC, 4)
|
|
# define C5 PAL_LINE(GPIOC, 5)
|
|
# define C6 PAL_LINE(GPIOC, 6)
|
|
# define C7 PAL_LINE(GPIOC, 7)
|
|
# define C8 PAL_LINE(GPIOC, 8)
|
|
# define C9 PAL_LINE(GPIOC, 9)
|
|
# define C10 PAL_LINE(GPIOC, 10)
|
|
# define C11 PAL_LINE(GPIOC, 11)
|
|
# define C12 PAL_LINE(GPIOC, 12)
|
|
# define C13 PAL_LINE(GPIOC, 13)
|
|
# define C14 PAL_LINE(GPIOC, 14)
|
|
# define C15 PAL_LINE(GPIOC, 15)
|
|
# define D0 PAL_LINE(GPIOD, 0)
|
|
# define D1 PAL_LINE(GPIOD, 1)
|
|
# define D2 PAL_LINE(GPIOD, 2)
|
|
# define D3 PAL_LINE(GPIOD, 3)
|
|
# define D4 PAL_LINE(GPIOD, 4)
|
|
# define D5 PAL_LINE(GPIOD, 5)
|
|
# define D6 PAL_LINE(GPIOD, 6)
|
|
# define D7 PAL_LINE(GPIOD, 7)
|
|
# define D8 PAL_LINE(GPIOD, 8)
|
|
# define D9 PAL_LINE(GPIOD, 9)
|
|
# define D10 PAL_LINE(GPIOD, 10)
|
|
# define D11 PAL_LINE(GPIOD, 11)
|
|
# define D12 PAL_LINE(GPIOD, 12)
|
|
# define D13 PAL_LINE(GPIOD, 13)
|
|
# define D14 PAL_LINE(GPIOD, 14)
|
|
# define D15 PAL_LINE(GPIOD, 15)
|
|
# define E0 PAL_LINE(GPIOE, 0)
|
|
# define E1 PAL_LINE(GPIOE, 1)
|
|
# define E2 PAL_LINE(GPIOE, 2)
|
|
# define E3 PAL_LINE(GPIOE, 3)
|
|
# define E4 PAL_LINE(GPIOE, 4)
|
|
# define E5 PAL_LINE(GPIOE, 5)
|
|
# define E6 PAL_LINE(GPIOE, 6)
|
|
# define E7 PAL_LINE(GPIOE, 7)
|
|
# define E8 PAL_LINE(GPIOE, 8)
|
|
# define E9 PAL_LINE(GPIOE, 9)
|
|
# define E10 PAL_LINE(GPIOE, 10)
|
|
# define E11 PAL_LINE(GPIOE, 11)
|
|
# define E12 PAL_LINE(GPIOE, 12)
|
|
# define E13 PAL_LINE(GPIOE, 13)
|
|
# define E14 PAL_LINE(GPIOE, 14)
|
|
# define E15 PAL_LINE(GPIOE, 15)
|
|
# define F0 PAL_LINE(GPIOF, 0)
|
|
# define F1 PAL_LINE(GPIOF, 1)
|
|
# define F2 PAL_LINE(GPIOF, 2)
|
|
# define F3 PAL_LINE(GPIOF, 3)
|
|
# define F4 PAL_LINE(GPIOF, 4)
|
|
# define F5 PAL_LINE(GPIOF, 5)
|
|
# define F6 PAL_LINE(GPIOF, 6)
|
|
# define F7 PAL_LINE(GPIOF, 7)
|
|
# define F8 PAL_LINE(GPIOF, 8)
|
|
# define F9 PAL_LINE(GPIOF, 9)
|
|
# define F10 PAL_LINE(GPIOF, 10)
|
|
# define F11 PAL_LINE(GPIOF, 11)
|
|
# define F12 PAL_LINE(GPIOF, 12)
|
|
# define F13 PAL_LINE(GPIOF, 13)
|
|
# define F14 PAL_LINE(GPIOF, 14)
|
|
# define F15 PAL_LINE(GPIOF, 15)
|
|
# define G0 PAL_LINE(GPIOG, 0)
|
|
# define G1 PAL_LINE(GPIOG, 1)
|
|
# define G2 PAL_LINE(GPIOG, 2)
|
|
# define G3 PAL_LINE(GPIOG, 3)
|
|
# define G4 PAL_LINE(GPIOG, 4)
|
|
# define G5 PAL_LINE(GPIOG, 5)
|
|
# define G6 PAL_LINE(GPIOG, 6)
|
|
# define G7 PAL_LINE(GPIOG, 7)
|
|
# define G8 PAL_LINE(GPIOG, 8)
|
|
# define G9 PAL_LINE(GPIOG, 9)
|
|
# define G10 PAL_LINE(GPIOG, 10)
|
|
# define G11 PAL_LINE(GPIOG, 11)
|
|
# define G12 PAL_LINE(GPIOG, 12)
|
|
# define G13 PAL_LINE(GPIOG, 13)
|
|
# define G14 PAL_LINE(GPIOG, 14)
|
|
# define G15 PAL_LINE(GPIOG, 15)
|
|
# define H0 PAL_LINE(GPIOH, 0)
|
|
# define H1 PAL_LINE(GPIOH, 1)
|
|
# define H2 PAL_LINE(GPIOH, 2)
|
|
# define H3 PAL_LINE(GPIOH, 3)
|
|
# define H4 PAL_LINE(GPIOH, 4)
|
|
# define H5 PAL_LINE(GPIOH, 5)
|
|
# define H6 PAL_LINE(GPIOH, 6)
|
|
# define H7 PAL_LINE(GPIOH, 7)
|
|
# define H8 PAL_LINE(GPIOH, 8)
|
|
# define H9 PAL_LINE(GPIOH, 9)
|
|
# define H10 PAL_LINE(GPIOH, 10)
|
|
# define H11 PAL_LINE(GPIOH, 11)
|
|
# define H12 PAL_LINE(GPIOH, 12)
|
|
# define H13 PAL_LINE(GPIOH, 13)
|
|
# define H14 PAL_LINE(GPIOH, 14)
|
|
# define H15 PAL_LINE(GPIOH, 15)
|
|
# define I0 PAL_LINE(GPIOI, 0)
|
|
# define I1 PAL_LINE(GPIOI, 1)
|
|
# define I2 PAL_LINE(GPIOI, 2)
|
|
# define I3 PAL_LINE(GPIOI, 3)
|
|
# define I4 PAL_LINE(GPIOI, 4)
|
|
# define I5 PAL_LINE(GPIOI, 5)
|
|
# define I6 PAL_LINE(GPIOI, 6)
|
|
# define I7 PAL_LINE(GPIOI, 7)
|
|
# define I8 PAL_LINE(GPIOI, 8)
|
|
# define I9 PAL_LINE(GPIOI, 9)
|
|
# define I10 PAL_LINE(GPIOI, 10)
|
|
# define I11 PAL_LINE(GPIOI, 11)
|
|
# define I12 PAL_LINE(GPIOI, 12)
|
|
# define I13 PAL_LINE(GPIOI, 13)
|
|
# define I14 PAL_LINE(GPIOI, 14)
|
|
# define I15 PAL_LINE(GPIOI, 15)
|
|
# define J0 PAL_LINE(GPIOJ, 0)
|
|
# define J1 PAL_LINE(GPIOJ, 1)
|
|
# define J2 PAL_LINE(GPIOJ, 2)
|
|
# define J3 PAL_LINE(GPIOJ, 3)
|
|
# define J4 PAL_LINE(GPIOJ, 4)
|
|
# define J5 PAL_LINE(GPIOJ, 5)
|
|
# define J6 PAL_LINE(GPIOJ, 6)
|
|
# define J7 PAL_LINE(GPIOJ, 7)
|
|
# define J8 PAL_LINE(GPIOJ, 8)
|
|
# define J9 PAL_LINE(GPIOJ, 9)
|
|
# define J10 PAL_LINE(GPIOJ, 10)
|
|
# define J11 PAL_LINE(GPIOJ, 11)
|
|
# define J12 PAL_LINE(GPIOJ, 12)
|
|
# define J13 PAL_LINE(GPIOJ, 13)
|
|
# define J14 PAL_LINE(GPIOJ, 14)
|
|
# define J15 PAL_LINE(GPIOJ, 15)
|
|
// Keyboards can `#define KEYBOARD_REQUIRES_GPIOK` if they need to access GPIO-K pins. These conflict with a whole
|
|
// bunch of layout definitions, so it's intentionally left out unless absolutely required -- in that case, the
|
|
// keyboard designer should use a different symbol when defining their layout macros.
|
|
# ifdef KEYBOARD_REQUIRES_GPIOK
|
|
# define K0 PAL_LINE(GPIOK, 0)
|
|
# define K1 PAL_LINE(GPIOK, 1)
|
|
# define K2 PAL_LINE(GPIOK, 2)
|
|
# define K3 PAL_LINE(GPIOK, 3)
|
|
# define K4 PAL_LINE(GPIOK, 4)
|
|
# define K5 PAL_LINE(GPIOK, 5)
|
|
# define K6 PAL_LINE(GPIOK, 6)
|
|
# define K7 PAL_LINE(GPIOK, 7)
|
|
# define K8 PAL_LINE(GPIOK, 8)
|
|
# define K9 PAL_LINE(GPIOK, 9)
|
|
# define K10 PAL_LINE(GPIOK, 10)
|
|
# define K11 PAL_LINE(GPIOK, 11)
|
|
# define K12 PAL_LINE(GPIOK, 12)
|
|
# define K13 PAL_LINE(GPIOK, 13)
|
|
# define K14 PAL_LINE(GPIOK, 14)
|
|
# define K15 PAL_LINE(GPIOK, 15)
|
|
# endif
|
|
# endif
|
|
#endif
|
|
|
|
/* USART configuration */
|
|
#ifdef BLUETOOTH_ENABLE
|
|
# ifdef __AVR_ATmega32U4__
|
|
# define SERIAL_UART_BAUD 9600
|
|
# define SERIAL_UART_DATA UDR1
|
|
# define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
|
|
# define SERIAL_UART_RXD_VECT USART1_RX_vect
|
|
# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
|
|
# define SERIAL_UART_INIT() \
|
|
do { \
|
|
/* baud rate */ \
|
|
UBRR1L = SERIAL_UART_UBRR; \
|
|
/* baud rate */ \
|
|
UBRR1H = SERIAL_UART_UBRR >> 8; \
|
|
/* enable TX */ \
|
|
UCSR1B = _BV(TXEN1); \
|
|
/* 8-bit data */ \
|
|
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
|
|
sei(); \
|
|
} while (0)
|
|
# elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
|
|
# define SERIAL_UART_BAUD 115200
|
|
# define SERIAL_UART_DATA UDR1
|
|
/* UBRR should result in ~16 and set UCSR1A = _BV(U2X1) as per rn42 documentation. HC05 needs baudrate configured accordingly */
|
|
# define SERIAL_UART_UBRR (F_CPU / (8UL * SERIAL_UART_BAUD) - 1)
|
|
# define SERIAL_UART_RXD_VECT USART1_RX_vect
|
|
# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
|
|
# define SERIAL_UART_INIT() \
|
|
do { \
|
|
UCSR1A = _BV(U2X1); \
|
|
/* baud rate */ \
|
|
UBRR1L = SERIAL_UART_UBRR; \
|
|
/* baud rate */ \
|
|
UBRR1H = SERIAL_UART_UBRR >> 8; \
|
|
/* enable TX */ \
|
|
UCSR1B = _BV(TXEN1); \
|
|
/* 8-bit data */ \
|
|
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
|
|
sei(); \
|
|
} while (0)
|
|
# else
|
|
# error "USART configuration is needed."
|
|
# endif
|
|
#endif
|
|
|
|
#define API_SYSEX_MAX_SIZE 32
|
|
|
|
#include "song_list.h"
|