skylark-qmk/keyboards/westfoxtrot/aanzee/config.h

/*
Copyright 2019 westfoxtrot

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

#include "config_common.h"

/* USB Device descriptor parameter */
#define VENDOR_ID       0x21FF
#define PRODUCT_ID      0xAA01
#define DEVICE_VER      0x0001
#define MANUFACTURER    westfoxtrot
#define PRODUCT         aanzee
#define DESCRIPTION     QMK Firmware for the Aanzee PCB

/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 16

// ROWS: Top to bottom, COLS: Left to right

#define MATRIX_ROW_PINS {B4,D7,D6,D4,B3}
#define MATRIX_COL_PINS {D2,D1,D0,D3,D5,C7,C6,B6,B5,F0,F1,F4,F5,F6,F7,B0}
#define UNUSED_PINS

/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW

#define BACKLIGHT_PIN B7
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 5

#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
   #define RGBLED_NUM 9
   #define RGBLIGHT_HUE_STEP 12
   #define RGBLIGHT_SAT_STEP 25
   #define RGBLIGHT_VAL_STEP 12
   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
   #define RGBLIGHT_ANIMATIONS
/*== or choose animations ==*/
//  #define RGBLIGHT_EFFECT_BREATHING
//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
//   #define RGBLIGHT_EFFECT_SNAKE
//   #define RGBLIGHT_EFFECT_KNIGHT
//   #define RGBLIGHT_EFFECT_CHRISTMAS
//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
//   #define RGBLIGHT_EFFECT_RGB_TEST
//   #define RGBLIGHT_EFFECT_ALTERNATING
#endif
#define RGBW

/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5

/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST

/* number of backlight levels */

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
#define GRAVE_ESC_CTRL_OVERRIDE

/*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
//#define FORCE_NKRO

/*
 * Magic Key Options
 *
 * Magic keys are hotkey commands that allow control over firmware functions of
 * the keyboard. They are best used in combination with the HID Listen program,
 * found here: https://www.pjrc.com/teensy/hid_listen.html
 *
 * The options below allow the magic key functionality to be changed. This is
 * useful if your keyboard/keypad is missing keys and you want magic key support.
 *
 */


//dynamic keymap and via support

#define DYNAMIC_KEYMAP_LAYER_COUNT 4

// EEPROM usage

// TODO: refactor with new user EEPROM code (coming soon)
#define EEPROM_MAGIC 0x451F
#define EEPROM_MAGIC_ADDR 32
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
// and avoid loading invalid data from the EEPROM
#define EEPROM_VERSION 0x08
#define EEPROM_VERSION_ADDR 34

// Dynamic keymap starts after EEPROM version
#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 675    // **** CHANGE THIS BASED ON MATRIX_ROWS & MATRIX_COLS ****
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 349    // **** CHANGE THIS BASED ON 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR ****
#define DYNAMIC_KEYMAP_MACRO_COUNT 16