157 lines
8.1 KiB
C
157 lines
8.1 KiB
C
// Copyright 2021 Paul Cotter (@gr1mr3aver)
|
|
// Copyright 2023 Nick Brassel (@tzarc)
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#include <wait.h>
|
|
#include "qp_internal.h"
|
|
#include "qp_comms.h"
|
|
#include "qp_gc9a01.h"
|
|
#include "qp_gc9a01_opcodes.h"
|
|
#include "qp_tft_panel.h"
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Driver storage
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
tft_panel_dc_reset_painter_device_t gc9a01_drivers[GC9A01_NUM_DEVICES] = {0};
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Initialization
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
__attribute__((weak)) bool qp_gc9a01_init(painter_device_t device, painter_rotation_t rotation) {
|
|
// A lot of these "unknown" opcodes are sourced from other OSS projects and are seemingly required for this display to function.
|
|
// clang-format off
|
|
const uint8_t gc9a01_init_sequence[] = {
|
|
// Command, Delay, N, Data[N]
|
|
GC9A01_SET_INTER_REG_ENABLE2, 0, 0,
|
|
0xEB, 0, 1, 0x14,
|
|
GC9A01_SET_INTER_REG_ENABLE1, 0, 0,
|
|
GC9A01_SET_INTER_REG_ENABLE2, 0, 0,
|
|
0xEB, 0, 1, 0x14,
|
|
0x84, 0, 1, 0x40,
|
|
0x85, 0, 1, 0xFF,
|
|
0x86, 0, 1, 0xFF,
|
|
0x87, 0, 1, 0xFF,
|
|
0x88, 0, 1, 0x0A,
|
|
0x89, 0, 1, 0x21,
|
|
0x8a, 0, 1, 0x00,
|
|
0x8b, 0, 1, 0x80,
|
|
0x8c, 0, 1, 0x01,
|
|
0x8d, 0, 1, 0x01,
|
|
0x8e, 0, 1, 0xFF,
|
|
0x8f, 0, 1, 0xFF,
|
|
GC9A01_SET_FUNCTION_CTL, 0, 2, 0x00, 0x20,
|
|
GC9A01_SET_PIX_FMT, 0, 1, 0x55,
|
|
0x90, 0, 4, 0x08, 0x08, 0x08, 0x08,
|
|
0xBD, 0, 1, 0x06,
|
|
0xBC, 0, 1, 0x00,
|
|
0xFF, 0, 3, 0x60, 0x01, 0x04,
|
|
GC9A01_SET_POWER_CTL_2, 0, 1, 0x13,
|
|
GC9A01_SET_POWER_CTL_3, 0, 1, 0x13,
|
|
GC9A01_SET_POWER_CTL_4, 0, 1, 0x22,
|
|
0xBE, 0, 1, 0x11,
|
|
0xE1, 0, 2, 0x10, 0x0E,
|
|
0xDF, 0, 3, 0x21, 0x0C, 0x02,
|
|
GC9A01_SET_GAMMA1, 0, 6, 0x45, 0x09, 0x08, 0x08, 0x26, 0x2A,
|
|
GC9A01_SET_GAMMA2, 0, 6, 0x43, 0x70, 0x72, 0x36, 0x37, 0x6F,
|
|
GC9A01_SET_GAMMA3, 0, 6, 0x45, 0x09, 0x08, 0x08, 0x26, 0x2A,
|
|
GC9A01_SET_GAMMA4, 0, 6, 0x43, 0x70, 0x72, 0x36, 0x37, 0x6F,
|
|
0xED, 0, 2, 0x1B, 0x0B,
|
|
0xAE, 0, 1, 0x77,
|
|
0xCD, 0, 1, 0x63,
|
|
0x70, 0, 9, 0x07, 0x07, 0x04, 0x0E, 0x0F, 0x09, 0x07, 0x08, 0x03,
|
|
GC9A01_SET_FRAME_RATE, 0, 1, 0x34,
|
|
0x62, 0, 12, 0x18, 0x0D, 0x71, 0xED, 0x70, 0x70, 0x18, 0x0F, 0x71, 0xEF, 0x70, 0x70,
|
|
0x63, 0, 12, 0x18, 0x11, 0x71, 0xF1, 0x70, 0x70, 0x18, 0x13, 0x71, 0xF3, 0x70, 0x70,
|
|
0x64, 0, 7, 0x28, 0x29, 0xF1, 0x01, 0xF1, 0x00, 0x07,
|
|
0x66, 0, 10, 0x3C, 0x00, 0xCD, 0x67, 0x45, 0x45, 0x10, 0x00, 0x00, 0x00,
|
|
0x67, 0, 10, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01, 0x54, 0x10, 0x32, 0x98,
|
|
0x74, 0, 7, 0x10, 0x85, 0x80, 0x00, 0x00, 0x4E, 0x00,
|
|
0x98, 0, 2, 0x3E, 0x07,
|
|
GC9A01_CMD_TEARING_OFF, 0, 0,
|
|
GC9A01_CMD_INVERT_OFF, 0, 0,
|
|
GC9A01_CMD_SLEEP_OFF, 120, 0,
|
|
GC9A01_CMD_DISPLAY_ON, 20, 0
|
|
};
|
|
// clang-format on
|
|
|
|
// clang-format on
|
|
qp_comms_bulk_command_sequence(device, gc9a01_init_sequence, sizeof(gc9a01_init_sequence));
|
|
|
|
// Configure the rotation (i.e. the ordering and direction of memory writes in GRAM)
|
|
const uint8_t madctl[] = {
|
|
[QP_ROTATION_0] = GC9A01_MADCTL_BGR,
|
|
[QP_ROTATION_90] = GC9A01_MADCTL_BGR | GC9A01_MADCTL_MX | GC9A01_MADCTL_MV,
|
|
[QP_ROTATION_180] = GC9A01_MADCTL_BGR | GC9A01_MADCTL_MX | GC9A01_MADCTL_MY,
|
|
[QP_ROTATION_270] = GC9A01_MADCTL_BGR | GC9A01_MADCTL_MV | GC9A01_MADCTL_MY,
|
|
};
|
|
qp_comms_command_databyte(device, GC9A01_SET_MEM_ACS_CTL, madctl[rotation]);
|
|
|
|
return true;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Driver vtable
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
const struct tft_panel_dc_reset_painter_driver_vtable_t gc9a01_driver_vtable = {
|
|
.base =
|
|
{
|
|
.init = qp_gc9a01_init,
|
|
.power = qp_tft_panel_power,
|
|
.clear = qp_tft_panel_clear,
|
|
.flush = qp_tft_panel_flush,
|
|
.pixdata = qp_tft_panel_pixdata,
|
|
.viewport = qp_tft_panel_viewport,
|
|
.palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
|
|
.append_pixels = qp_tft_panel_append_pixels_rgb565,
|
|
.append_pixdata = qp_tft_panel_append_pixdata,
|
|
},
|
|
.num_window_bytes = 2,
|
|
.swap_window_coords = false,
|
|
.opcodes =
|
|
{
|
|
.display_on = GC9A01_CMD_DISPLAY_ON,
|
|
.display_off = GC9A01_CMD_DISPLAY_OFF,
|
|
.set_column_address = GC9A01_SET_COL_ADDR,
|
|
.set_row_address = GC9A01_SET_PAGE_ADDR,
|
|
.enable_writes = GC9A01_SET_MEM,
|
|
},
|
|
};
|
|
|
|
#ifdef QUANTUM_PAINTER_GC9A01_SPI_ENABLE
|
|
// Factory function for creating a handle to the ILI9341 device
|
|
painter_device_t qp_gc9a01_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) {
|
|
for (uint32_t i = 0; i < GC9A01_NUM_DEVICES; ++i) {
|
|
tft_panel_dc_reset_painter_device_t *driver = &gc9a01_drivers[i];
|
|
if (!driver->base.driver_vtable) {
|
|
driver->base.driver_vtable = (const struct painter_driver_vtable_t *)&gc9a01_driver_vtable;
|
|
driver->base.comms_vtable = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
|
|
driver->base.native_bits_per_pixel = 16; // RGB565
|
|
driver->base.panel_width = panel_width;
|
|
driver->base.panel_height = panel_height;
|
|
driver->base.rotation = QP_ROTATION_0;
|
|
driver->base.offset_x = 0;
|
|
driver->base.offset_y = 0;
|
|
|
|
// SPI and other pin configuration
|
|
driver->base.comms_config = &driver->spi_dc_reset_config;
|
|
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
|
|
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
|
|
driver->spi_dc_reset_config.spi_config.lsb_first = false;
|
|
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
|
|
driver->spi_dc_reset_config.dc_pin = dc_pin;
|
|
driver->spi_dc_reset_config.reset_pin = reset_pin;
|
|
|
|
if (!qp_internal_register_device((painter_device_t)driver)) {
|
|
memset(driver, 0, sizeof(tft_panel_dc_reset_painter_device_t));
|
|
return NULL;
|
|
}
|
|
|
|
return (painter_device_t)driver;
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
#endif // QUANTUM_PAINTER_GC9A01_SPI_ENABLE
|