stellarskylark/skylark-qmk
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
skylark-qmk/tmk_core/protocol/vusb/usbdrv/usbdrvasm.S
Jack Humbert 15f6278aa6
Add support for Atmega32A to pin declarations and universal matrix (#4015) 
* add computed pins from mcu type

* update for atmega32a

* doc typo

* add atmega16 chips, link to references

* remove avr include from config

* exclude assembler in config.h includes

* consolodate options, add 646

* fix typo in pindef
2018-11-02 12:31:40 -04:00

393 lines
11 KiB
ArmAsm
Raw Blame History

/* Name: usbdrvasm.S
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
* Author: Christian Starkjohann
* Creation Date: 2007-06-13
* Tabsize: 4
* Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* Revision: $Id: usbdrvasm.S 785 2010-05-30 17:57:07Z cs $
*/
/*
General Description:
This module is the assembler part of the USB driver. This file contains
general code (preprocessor acrobatics and CRC computation) and then includes
the file appropriate for the given clock rate.
*/
#define __SFR_OFFSET 0 /* used by avr-libc's register definitions */
#include "usbportability.h"
#include "usbdrv.h" /* for common defs */
/* register names */
#define x1 r16
#define x2 r17
#define shift r18
#define cnt r19
#define x3 r20
#define x4 r21
#define x5 r22
#define bitcnt x5
#define phase x4
#define leap x4
/* Some assembler dependent definitions and declarations: */
#ifdef __IAR_SYSTEMS_ASM__
extern usbRxBuf, usbDeviceAddr, usbNewDeviceAddr, usbInputBufOffset
extern usbCurrentTok, usbRxLen, usbRxToken, usbTxLen
extern usbTxBuf, usbTxStatus1, usbTxStatus3
# if USB_COUNT_SOF
extern usbSofCount
# endif
public usbCrc16
public usbCrc16Append
COMMON INTVEC
# ifndef USB_INTR_VECTOR
ORG INT0_vect
# else /* USB_INTR_VECTOR */
ORG USB_INTR_VECTOR
# undef USB_INTR_VECTOR
# endif /* USB_INTR_VECTOR */
# define USB_INTR_VECTOR usbInterruptHandler
rjmp USB_INTR_VECTOR
RSEG CODE
#else /* __IAR_SYSTEMS_ASM__ */
# ifndef USB_INTR_VECTOR /* default to hardware interrupt INT0 */
# ifdef INT0_vect
# define USB_INTR_VECTOR INT0_vect // this is the "new" define for the vector
# else
# define USB_INTR_VECTOR SIG_INTERRUPT0 // this is the "old" vector
# endif
# endif
.text
.global USB_INTR_VECTOR
.type USB_INTR_VECTOR, @function
.global usbCrc16
.global usbCrc16Append
#endif /* __IAR_SYSTEMS_ASM__ */
#if USB_INTR_PENDING < 0x40 /* This is an I/O address, use in and out */
# define USB_LOAD_PENDING(reg) in reg, USB_INTR_PENDING
# define USB_STORE_PENDING(reg) out USB_INTR_PENDING, reg
#else /* It's a memory address, use lds and sts */
# define USB_LOAD_PENDING(reg) lds reg, USB_INTR_PENDING
# define USB_STORE_PENDING(reg) sts USB_INTR_PENDING, reg
#endif
#define usbTxLen1 usbTxStatus1
#define usbTxBuf1 (usbTxStatus1 + 1)
#define usbTxLen3 usbTxStatus3
#define usbTxBuf3 (usbTxStatus3 + 1)
;----------------------------------------------------------------------------
; Utility functions
;----------------------------------------------------------------------------
#ifdef __IAR_SYSTEMS_ASM__
/* Register assignments for usbCrc16 on IAR cc */
/* Calling conventions on IAR:
* First parameter passed in r16/r17, second in r18/r19 and so on.
* Callee must preserve r4-r15, r24-r29 (r28/r29 is frame pointer)
* Result is passed in r16/r17
* In case of the "tiny" memory model, pointers are only 8 bit with no
* padding. We therefore pass argument 1 as "16 bit unsigned".
*/
RTMODEL "__rt_version", "3"
/* The line above will generate an error if cc calling conventions change.
* The value "3" above is valid for IAR 4.10B/W32
*/
# define argLen r18 /* argument 2 */
# define argPtrL r16 /* argument 1 */
# define argPtrH r17 /* argument 1 */
# define resCrcL r16 /* result */
# define resCrcH r17 /* result */
# define ptrL ZL
# define ptrH ZH
# define ptr Z
# define byte r22
# define bitCnt r19
# define polyL r20
# define polyH r21
# define scratch r23
#else /* __IAR_SYSTEMS_ASM__ */
/* Register assignments for usbCrc16 on gcc */
/* Calling conventions on gcc:
* First parameter passed in r24/r25, second in r22/23 and so on.
* Callee must preserve r1-r17, r28/r29
* Result is passed in r24/r25
*/
# define argLen r22 /* argument 2 */
# define argPtrL r24 /* argument 1 */
# define argPtrH r25 /* argument 1 */
# define resCrcL r24 /* result */
# define resCrcH r25 /* result */
# define ptrL XL
# define ptrH XH
# define ptr x
# define byte r18
# define bitCnt r19
# define polyL r20
# define polyH r21
# define scratch r23
#endif
#if USB_USE_FAST_CRC
; This implementation is faster, but has bigger code size
; Thanks to Slawomir Fras (BoskiDialer) for this code!
; It implements the following C pseudo-code:
; unsigned table(unsigned char x)
; {
; unsigned value;
;
; value = (unsigned)x << 6;
; value ^= (unsigned)x << 7;
; if(parity(x))
; value ^= 0xc001;
; return value;
; }
; unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen)
; {
; unsigned crc = 0xffff;
;
; while(argLen--)
; crc = table(lo8(crc) ^ *argPtr++) ^ hi8(crc);
; return ~crc;
; }
; extern unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen);
; argPtr r24+25 / r16+r17
; argLen r22 / r18
; temp variables:
; byte r18 / r22
; scratch r23
; resCrc r24+r25 / r16+r17
; ptr X / Z
usbCrc16:
mov ptrL, argPtrL
mov ptrH, argPtrH
ldi resCrcL, 0xFF
ldi resCrcH, 0xFF
rjmp usbCrc16LoopTest
usbCrc16ByteLoop:
ld byte, ptr+
eor resCrcL, byte ; resCrcL is now 'x' in table()
mov byte, resCrcL ; compute parity of 'x'
swap byte
eor byte, resCrcL
mov scratch, byte
lsr byte
lsr byte
eor byte, scratch
inc byte
lsr byte
andi byte, 1 ; byte is now parity(x)
mov scratch, resCrcL
mov resCrcL, resCrcH
eor resCrcL, byte ; low byte of if(parity(x)) value ^= 0xc001;
neg byte
andi byte, 0xc0
mov resCrcH, byte ; high byte of if(parity(x)) value ^= 0xc001;
clr byte
lsr scratch
ror byte
eor resCrcH, scratch
eor resCrcL, byte
lsr scratch
ror byte
eor resCrcH, scratch
eor resCrcL, byte
usbCrc16LoopTest:
subi argLen, 1
brsh usbCrc16ByteLoop
com resCrcL
com resCrcH
ret
#else /* USB_USE_FAST_CRC */
; This implementation is slower, but has less code size
;
; extern unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen);
; argPtr r24+25 / r16+r17
; argLen r22 / r18
; temp variables:
; byte r18 / r22
; bitCnt r19
; poly r20+r21
; scratch r23
; resCrc r24+r25 / r16+r17
; ptr X / Z
usbCrc16:
mov ptrL, argPtrL
mov ptrH, argPtrH
ldi resCrcL, 0
ldi resCrcH, 0
ldi polyL, lo8(0xa001)
ldi polyH, hi8(0xa001)
com argLen ; argLen = -argLen - 1: modified loop to ensure that carry is set
ldi bitCnt, 0 ; loop counter with starnd condition = end condition
rjmp usbCrcLoopEntry
usbCrcByteLoop:
ld byte, ptr+
eor resCrcL, byte
usbCrcBitLoop:
ror resCrcH ; carry is always set here (see brcs jumps to here)
ror resCrcL
brcs usbCrcNoXor
eor resCrcL, polyL
eor resCrcH, polyH
usbCrcNoXor:
subi bitCnt, 224 ; (8 * 224) % 256 = 0; this loop iterates 8 times
brcs usbCrcBitLoop
usbCrcLoopEntry:
subi argLen, -1
brcs usbCrcByteLoop
usbCrcReady:
ret
; Thanks to Reimar Doeffinger for optimizing this CRC routine!
#endif /* USB_USE_FAST_CRC */
; extern unsigned usbCrc16Append(unsigned char *data, unsigned char len);
usbCrc16Append:
rcall usbCrc16
st ptr+, resCrcL
st ptr+, resCrcH
ret
#undef argLen
#undef argPtrL
#undef argPtrH
#undef resCrcL
#undef resCrcH
#undef ptrL
#undef ptrH
#undef ptr
#undef byte
#undef bitCnt
#undef polyL
#undef polyH
#undef scratch
#if USB_CFG_HAVE_MEASURE_FRAME_LENGTH
#ifdef __IAR_SYSTEMS_ASM__
/* Register assignments for usbMeasureFrameLength on IAR cc */
/* Calling conventions on IAR:
* First parameter passed in r16/r17, second in r18/r19 and so on.
* Callee must preserve r4-r15, r24-r29 (r28/r29 is frame pointer)
* Result is passed in r16/r17
* In case of the "tiny" memory model, pointers are only 8 bit with no
* padding. We therefore pass argument 1 as "16 bit unsigned".
*/
# define resL r16
# define resH r17
# define cnt16L r30
# define cnt16H r31
# define cntH r18
#else /* __IAR_SYSTEMS_ASM__ */
/* Register assignments for usbMeasureFrameLength on gcc */
/* Calling conventions on gcc:
* First parameter passed in r24/r25, second in r22/23 and so on.
* Callee must preserve r1-r17, r28/r29
* Result is passed in r24/r25
*/
# define resL r24
# define resH r25
# define cnt16L r24
# define cnt16H r25
# define cntH r26
#endif
# define cnt16 cnt16L
; extern unsigned usbMeasurePacketLength(void);
; returns time between two idle strobes in multiples of 7 CPU clocks
.global usbMeasureFrameLength
usbMeasureFrameLength:
ldi cntH, 6 ; wait ~ 10 ms for D- == 0
clr cnt16L
clr cnt16H
usbMFTime16:
dec cntH
breq usbMFTimeout
usbMFWaitStrobe: ; first wait for D- == 0 (idle strobe)
sbiw cnt16, 1 ;[0] [6]
breq usbMFTime16 ;[2]
sbic USBIN, USBMINUS ;[3]
rjmp usbMFWaitStrobe ;[4]
usbMFWaitIdle: ; then wait until idle again
sbis USBIN, USBMINUS ;1 wait for D- == 1
rjmp usbMFWaitIdle ;2
ldi cnt16L, 1 ;1 represents cycles so far
clr cnt16H ;1
usbMFWaitLoop:
in cntH, USBIN ;[0] [7]
adiw cnt16, 1 ;[1]
breq usbMFTimeout ;[3]
andi cntH, USBMASK ;[4]
brne usbMFWaitLoop ;[5]
usbMFTimeout:
#if resL != cnt16L
mov resL, cnt16L
mov resH, cnt16H
#endif
ret
#undef resL
#undef resH
#undef cnt16
#undef cnt16L
#undef cnt16H
#undef cntH
#endif /* USB_CFG_HAVE_MEASURE_FRAME_LENGTH */
;----------------------------------------------------------------------------
; Now include the clock rate specific code
;----------------------------------------------------------------------------
#ifndef USB_CFG_CLOCK_KHZ
# ifdef F_CPU
# define USB_CFG_CLOCK_KHZ (F_CPU/1000)
# else
# error "USB_CFG_CLOCK_KHZ not defined in usbconfig.h and no F_CPU set!"
# endif
#endif
#if USB_CFG_CHECK_CRC /* separate dispatcher for CRC type modules */
# if USB_CFG_CLOCK_KHZ == 18000
# include "usbdrvasm18-crc.inc"
# else
# error "USB_CFG_CLOCK_KHZ is not one of the supported crc-rates!"
# endif
#else /* USB_CFG_CHECK_CRC */
# if USB_CFG_CLOCK_KHZ == 12000
# include "usbdrvasm12.inc"
# elif USB_CFG_CLOCK_KHZ == 12800
# include "usbdrvasm128.inc"
# elif USB_CFG_CLOCK_KHZ == 15000
# include "usbdrvasm15.inc"
# elif USB_CFG_CLOCK_KHZ == 16000
# include "usbdrvasm16.inc"
# elif USB_CFG_CLOCK_KHZ == 16500
# include "usbdrvasm165.inc"
# elif USB_CFG_CLOCK_KHZ == 20000
# include "usbdrvasm20.inc"
# else
# error "USB_CFG_CLOCK_KHZ is not one of the supported non-crc-rates!"
# endif
#endif /* USB_CFG_CHECK_CRC */
Reference in a new issue View git blame Copy permalink