30680c6eb3
* Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
90 lines
2.4 KiB
C
90 lines
2.4 KiB
C
/*
|
|
Copyright 2018 Massdrop Inc.
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "arm_atsam_protocol.h"
|
|
|
|
Srdata_t srdata;
|
|
|
|
void SPI_WriteSRData(void)
|
|
{
|
|
uint16_t timeout;
|
|
|
|
SC2_RCLCK_LO;
|
|
|
|
timeout = 50000;
|
|
while (!(SCSPI->SPI.INTFLAG.bit.DRE) && --timeout) { DBGC(DC_SPI_WRITE_DRE); }
|
|
|
|
SCSPI->SPI.DATA.bit.DATA = srdata.reg & 0xFF; //Shift in bits 7-0
|
|
timeout = 50000;
|
|
while (!(SCSPI->SPI.INTFLAG.bit.TXC) && --timeout) { DBGC(DC_SPI_WRITE_TXC_1); }
|
|
|
|
SCSPI->SPI.DATA.bit.DATA = (srdata.reg >> 8) & 0xFF; //Shift in bits 15-8
|
|
timeout = 50000;
|
|
while (!(SCSPI->SPI.INTFLAG.bit.TXC) && --timeout) { DBGC(DC_SPI_WRITE_TXC_2); }
|
|
|
|
SC2_RCLCK_HI;
|
|
}
|
|
|
|
void SPI_Init(void)
|
|
{
|
|
uint32_t timeout;
|
|
|
|
DBGC(DC_SPI_INIT_BEGIN);
|
|
|
|
CLK_set_spi_freq(CHAN_SERCOM_SPI, FREQ_SPI_DEFAULT);
|
|
|
|
PORT->Group[0].PMUX[6].bit.PMUXE = 2;
|
|
PORT->Group[0].PMUX[6].bit.PMUXO = 2;
|
|
PORT->Group[0].PINCFG[12].bit.PMUXEN = 1;
|
|
PORT->Group[0].PINCFG[13].bit.PMUXEN = 1;
|
|
|
|
//Configure Shift Registers
|
|
SC2_DIRSET;
|
|
SC2_RCLCK_HI;
|
|
SC2_OE_DIS;
|
|
|
|
SCSPI->SPI.CTRLA.bit.DORD = 1;
|
|
SCSPI->SPI.CTRLA.bit.CPOL = 1;
|
|
SCSPI->SPI.CTRLA.bit.CPHA = 1;
|
|
SCSPI->SPI.CTRLA.bit.DIPO = 3;
|
|
SCSPI->SPI.CTRLA.bit.MODE = 3; //master
|
|
|
|
SCSPI->SPI.CTRLA.bit.ENABLE = 1;
|
|
timeout = 50000;
|
|
while (SCSPI->SPI.SYNCBUSY.bit.ENABLE && timeout--) { DBGC(DC_SPI_SYNC_ENABLING); }
|
|
|
|
srdata.reg = 0;
|
|
srdata.bit.HUB_CONNECT = 0;
|
|
srdata.bit.HUB_RESET_N = 0;
|
|
srdata.bit.S_UP = 0;
|
|
srdata.bit.E_UP_N = 1;
|
|
srdata.bit.S_DN1 = 1;
|
|
srdata.bit.E_DN1_N = 1;
|
|
srdata.bit.E_VBUS_1 = 0;
|
|
srdata.bit.E_VBUS_2 = 0;
|
|
srdata.bit.SRC_1 = 1;
|
|
srdata.bit.SRC_2 = 1;
|
|
srdata.bit.IRST = 1;
|
|
srdata.bit.SDB_N = 0;
|
|
SPI_WriteSRData();
|
|
|
|
//Enable register output
|
|
SC2_OE_ENA;
|
|
|
|
DBGC(DC_SPI_INIT_COMPLETE);
|
|
}
|
|
|