102 lines
3.3 KiB
C
102 lines
3.3 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://ugfx.org/license.html
|
|
*/
|
|
|
|
#ifndef _GDISP_LLD_BOARD_H
|
|
#define _GDISP_LLD_BOARD_H
|
|
|
|
#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6
|
|
#define ST7565_ADC ST7565_ADC_NORMAL
|
|
#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
|
|
#define ST7565_PAGE_ORDER 0, 1, 2, 3
|
|
/*
|
|
* Custom page order for several LCD boards, e.g. HEM12864-99
|
|
* #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3
|
|
*/
|
|
|
|
#define ST7565_GPIOPORT GPIOC
|
|
#define ST7565_PORT PORTC
|
|
#define ST7565_A0_PIN 7
|
|
#define ST7565_RST_PIN 8
|
|
#define ST7565_MOSI_PIN 6
|
|
#define ST7565_SLCK_PIN 5
|
|
#define ST7565_SS_PIN 4
|
|
|
|
#define palSetPadModeRaw(portname, bits) ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
|
|
|
|
#define palSetPadModeNamed(portname, portmode) palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
|
|
|
|
#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
|
|
// DSPI Clock and Transfer Attributes
|
|
// Frame Size: 8 bits
|
|
// MSB First
|
|
// CLK Low by default
|
|
static const SPIConfig spi1config = {
|
|
// Operation complete callback or @p NULL.
|
|
.end_cb = NULL,
|
|
// The chip select line port - when not using pcs.
|
|
.ssport = ST7565_GPIOPORT,
|
|
// brief The chip select line pad number - when not using pcs.
|
|
.sspad = ST7565_SS_PIN,
|
|
// SPI initialization data.
|
|
.tar0 = SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
|
|
| SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
|
|
| SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
|
|
| SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
|
|
| SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
|
|
| SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
|
|
};
|
|
|
|
static GFXINLINE void acquire_bus(GDisplay *g) {
|
|
(void)g;
|
|
// Only the LCD is using the SPI bus, so no need to acquire
|
|
// spiAcquireBus(&SPID1);
|
|
spiSelect(&SPID1);
|
|
}
|
|
|
|
static GFXINLINE void release_bus(GDisplay *g) {
|
|
(void)g;
|
|
// Only the LCD is using the SPI bus, so no need to release
|
|
// spiReleaseBus(&SPID1);
|
|
spiUnselect(&SPID1);
|
|
}
|
|
|
|
static GFXINLINE void init_board(GDisplay *g) {
|
|
(void)g;
|
|
palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
|
|
palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
|
|
palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
|
|
palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
|
|
palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
|
|
palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
|
|
palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
|
|
|
|
spiInit();
|
|
spiStart(&SPID1, &spi1config);
|
|
release_bus(g);
|
|
}
|
|
|
|
static GFXINLINE void post_init_board(GDisplay *g) { (void)g; }
|
|
|
|
static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
|
|
(void)g;
|
|
if (state) {
|
|
palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
|
|
} else {
|
|
palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
|
|
}
|
|
}
|
|
|
|
static GFXINLINE void enter_data_mode(GDisplay *g) { palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); }
|
|
|
|
static GFXINLINE void enter_cmd_mode(GDisplay *g) { palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); }
|
|
|
|
static GFXINLINE void write_data(GDisplay *g, uint8_t *data, uint16_t length) {
|
|
(void)g;
|
|
spiSend(&SPID1, length, data);
|
|
}
|
|
|
|
#endif /* _GDISP_LLD_BOARD_H */
|