History

Ryan 36bc3c867e Remove redundant `UNICODE_ENABLE = no` in keyboard-level rules.mk (#14633 )		2021-09-30 08:14:21 +10:00
..
keymaps
config.h	Remove unused `IS_COMMAND()` instances and Magic Key definitions (#14610 )	2021-09-26 02:57:20 -07:00
diverge3.c
diverge3.h
info.json	Remove width, height and key_count from info.json (#14274 )	2021-09-12 14:04:56 +10:00
readme.md
rules.mk	Remove redundant `UNICODE_ENABLE = no` in keyboard-level rules.mk (#14633 )	2021-09-30 08:14:21 +10:00

readme.md

diverge3

A split 5x7 keyboard with 3 thumb keys. Made by Unikeyboard.

Keyboard Maintainer: IslandMan93
Hardware Supported: Pro Micro
Hardware Availability: Diverge 3

Make example for this keyboard (after setting up your build environment):

make diverge3:default

Or for the Workman layout:

make diverge3:workman

See build environment setup then the make instructions for more information.

Reflashing Animus

Reflashing the stock firmware is pretty easy. Just follow the same steps in the original guide. You will have to manually reset the Pro Micro (by shorting the GND and RST pins) during the upload step. Then reapply your keymap through Arbites.