History

Konstantin Đorđević 2d39a9dcdb Remove no-longer-necessary LTO checks from keyboards' config.h files (#8773 ) * Remove no-longer-necessary LTO checks from keyboards' config.h files * Remove unnecessary LTO check in @danielo515's Ergodox EZ keymap * Remove unnecessary USE_Link_Time_Optimization checks from keyboards' config.h files Note: DISABLE_LEADER doesn't seem to be used anywhere		2020-04-19 23:56:48 +01:00
..
keymaps	Remove no-longer-necessary LTO checks from keyboards' config.h files (#8773 )	2020-04-19 23:56:48 +01:00
util
190hotfix.sh
config.h
ergodox_ez.c
ergodox_ez.h
info.json
led_i2c.c	Fix AVR ws2812 when ADDRESS_BASE is non zero (#8646 )	2020-04-02 20:46:38 +01:00
matrix.c	[Keyboard] Remove i2c write command when reading columns on Ergodox EZ (#8092 )	2020-02-07 18:52:02 -08:00
post_config.h
readme.md
rules.mk	Trim firmware sizes from default rules.mk, part 1 (#8027 )	2020-01-29 12:51:25 -05:00

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default
This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex
Start the teensy loader.
Load the .hex file into it.
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.
Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

Build the firmware with make keymapname, for example make default
Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.