1646c0f26c
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
205 lines
7.1 KiB
C
205 lines
7.1 KiB
C
/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
// Use custom magic number so that when switching branches, EEPROM always gets reset
|
|
#define EECONFIG_MAGIC_NUMBER (uint16_t)0x1339
|
|
|
|
/* Set Polling rate to 1000Hz */
|
|
#define USB_POLLING_INTERVAL_MS 1
|
|
|
|
#if defined(SPLIT_KEYBOARD)
|
|
# define SPLIT_MODS_ENABLE
|
|
# define SPLIT_TRANSPORT_MIRROR
|
|
# define SERIAL_USE_MULTI_TRANSACTION
|
|
// # define SPLIT_NUM_TRANSACTIONS_KB 2
|
|
#endif
|
|
|
|
#ifdef AUDIO_ENABLE
|
|
|
|
# define AUDIO_CLICKY
|
|
# define STARTUP_SONG SONG(RICK_ROLL)
|
|
# define GOODBYE_SONG SONG(SONIC_RING)
|
|
# define DEFAULT_LAYER_SONGS \
|
|
{ SONG(QWERTY_SOUND), SONG(COLEMAK_SOUND), SONG(DVORAK_SOUND), SONG(OVERWATCH_THEME) }
|
|
|
|
# define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f
|
|
|
|
# define UNICODE_SONG_MAC SONG(RICK_ROLL)
|
|
# define UNICODE_SONG_LNX SONG(RICK_ROLL)
|
|
# define UNICODE_SONG_WIN SONG(RICK_ROLL)
|
|
# define UNICODE_SONG_BSD SONG(RICK_ROLL)
|
|
# define UNICODE_SONG_WINC SONG(RICK_ROLL)
|
|
#endif // !AUDIO_ENABLE
|
|
|
|
#ifdef RGBLIGHT_ENABLE
|
|
# define RGBLIGHT_SLEEP
|
|
# if defined(__AVR__) && !defined(__AVR_AT90USB1286__)
|
|
# undef RGBLIGHT_ANIMATIONS
|
|
# define RGBLIGHT_EFFECT_BREATHING
|
|
# define RGBLIGHT_EFFECT_SNAKE
|
|
# define RGBLIGHT_EFFECT_KNIGHT
|
|
# else
|
|
# define RGBLIGHT_ANIMATIONS
|
|
# endif
|
|
# define RGBLIGHT_EFFECT_TWINKLE_LIFE 250
|
|
# define RGBLIGHT_EFFECT_TWINKLE_PROBABILITY 1/24
|
|
#endif // RGBLIGHT_ENABLE
|
|
|
|
#ifdef RGB_MATRIX_ENABLE
|
|
# define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
|
|
// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
|
|
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
|
// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
|
|
# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
|
|
// # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
|
|
// # define EECONFIG_RGB_MATRIX (uint32_t *)16
|
|
|
|
# if defined(__AVR__) && !defined(__AVR_AT90USB1286__) && !defined(KEYBOARD_launchpad)
|
|
# define DISABLE_RGB_MATRIX_ALPHAS_MODS
|
|
# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
|
|
# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
|
|
# define DISABLE_RGB_MATRIX_BREATHING
|
|
# define DISABLE_RGB_MATRIX_BAND_SAT
|
|
# define DISABLE_RGB_MATRIX_BAND_VAL
|
|
# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
|
|
# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
|
|
# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
|
|
# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
|
|
# define DISABLE_RGB_MATRIX_CYCLE_ALL
|
|
# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
|
|
# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
|
|
// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
|
|
// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
|
|
# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
|
|
# define DISABLE_RGB_MATRIX_DUAL_BEACON
|
|
# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
|
|
# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
|
|
# define DISABLE_RGB_MATRIX_RAINBOW_BEACON
|
|
# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
|
|
# define DISABLE_RGB_MATRIX_RAINDROPS
|
|
# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
|
|
// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP
|
|
# define DISABLE_RGB_MATRIX_DIGITAL_RAIN
|
|
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE
|
|
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
|
|
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
|
|
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
|
|
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
|
|
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
|
|
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
|
|
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
|
|
# define DISABLE_RGB_MATRIX_SPLASH
|
|
# define DISABLE_RGB_MATRIX_MULTISPLASH
|
|
# define DISABLE_RGB_MATRIX_SOLID_SPLASH
|
|
# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
|
|
# endif // AVR
|
|
#endif // RGB_MATRIX_ENABLE
|
|
|
|
#ifdef OLED_DRIVER_ENABLE
|
|
# ifdef SPLIT_KEYBOARD
|
|
# define OLED_UPDATE_INTERVAL 60
|
|
# else
|
|
# define OLED_UPDATE_INTERVAL 15
|
|
# endif
|
|
# define OLED_DISABLE_TIMEOUT
|
|
# ifdef OLED_FONT_H
|
|
# undef OLED_FONT_H
|
|
# endif
|
|
# define OLED_FONT_H "drashna_font.h"
|
|
# define OLED_FONT_END 255
|
|
// # define OLED_FONT_5X5
|
|
// # define OLED_FONT_AZTECH
|
|
// # define OLED_FONT_BMPLAIN
|
|
// # define OLED_FONT_SUPER_DIGG
|
|
// # define OLED_LOGO_GMK_BAD
|
|
// # define OLED_LOGO_HUE_MANITEE
|
|
// # define OLED_LOGO_CORNE
|
|
// # define OLED_LOGO_GOTHAM
|
|
# define OLED_LOGO_SCIFI
|
|
#endif
|
|
|
|
#ifndef ONESHOT_TAP_TOGGLE
|
|
# define ONESHOT_TAP_TOGGLE 2
|
|
#endif // !ONESHOT_TAP_TOGGLE
|
|
|
|
#ifndef ONESHOT_TIMEOUT
|
|
# define ONESHOT_TIMEOUT 3000
|
|
#endif // !ONESHOT_TIMEOUT
|
|
|
|
#ifdef QMK_KEYS_PER_SCAN
|
|
# undef QMK_KEYS_PER_SCAN
|
|
# define QMK_KEYS_PER_SCAN 2
|
|
#endif // !QMK_KEYS_PER_SCAN
|
|
|
|
// this makes it possible to do rolling combos (zx) with keys that
|
|
// convert to other keys on hold (z becomes ctrl when you hold it,
|
|
// and when this option isn't enabled, z rapidly followed by x
|
|
// actually sends Ctrl-x. That's bad.)
|
|
#define IGNORE_MOD_TAP_INTERRUPT
|
|
#undef PERMISSIVE_HOLD
|
|
//#define TAPPING_FORCE_HOLD
|
|
//#define RETRO_TAPPING
|
|
#ifndef KEYBOARD_kyria_rev1
|
|
# define TAPPING_TERM_PER_KEY
|
|
#endif
|
|
|
|
#define FORCE_NKRO
|
|
|
|
#ifndef TAPPING_TOGGLE
|
|
# define TAPPING_TOGGLE 1
|
|
#endif
|
|
|
|
#ifdef TAPPING_TERM
|
|
# undef TAPPING_TERM
|
|
#endif // TAPPING_TERM
|
|
#if defined(KEYBOARD_ergodox_ez)
|
|
# define TAPPING_TERM 185
|
|
#elif defined(KEYBOARD_crkbd)
|
|
# define TAPPING_TERM 200
|
|
#else
|
|
# define TAPPING_TERM 175
|
|
#endif
|
|
|
|
#define TAP_CODE_DELAY 5
|
|
|
|
/* Disable unused and unneeded features to reduce on firmware size */
|
|
#ifdef LOCKING_SUPPORT_ENABLE
|
|
# undef LOCKING_SUPPORT_ENABLE
|
|
#endif
|
|
#ifdef LOCKING_RESYNC_ENABLE
|
|
# undef LOCKING_RESYNC_ENABLE
|
|
#endif
|
|
|
|
#ifdef CONVERT_TO_PROTON_C
|
|
// pins that are available but not present on Pro Micro
|
|
# define A3 PAL_LINE(GPIOA, 3)
|
|
# define A4 PAL_LINE(GPIOA, 4)
|
|
# define A5 PAL_LINE(GPIOA, 5)
|
|
# define A6 PAL_LINE(GPIOA, 6)
|
|
# define A7 PAL_LINE(GPIOA, 7)
|
|
# define A8 PAL_LINE(GPIOA, 8)
|
|
# define A13 PAL_LINE(GPIOA, 13)
|
|
# define A14 PAL_LINE(GPIOA, 14)
|
|
# define A15 PAL_LINE(GPIOA, 15)
|
|
# define B10 PAL_LINE(GPIOB, 10)
|
|
# define B11 PAL_LINE(GPIOB, 11)
|
|
# define B12 PAL_LINE(GPIOB, 12)
|
|
# define C13 PAL_LINE(GPIOC, 13)
|
|
# define C14 PAL_LINE(GPIOC, 14)
|
|
# define C15 PAL_LINE(GPIOC, 15)
|
|
#endif
|