219 lines
6.9 KiB
C
219 lines
6.9 KiB
C
/*
|
|
|
|
NeXT non-ADB Keyboard Protocol
|
|
|
|
Copyright 2013, Benjamin Gould (bgould@github.com)
|
|
|
|
Based on:
|
|
TMK firmware code Copyright 2011,2012 Jun WAKO <wakojun@gmail.com>
|
|
Arduino code by "Ladyada" Limor Fried (http://ladyada.net/, http://adafruit.com/), released under BSD license
|
|
|
|
Timing reference thanks to http://m0115.web.fc2.com/ (dead link), http://cfile7.uf.tistory.com/image/14448E464F410BF22380BB
|
|
Pinouts thanks to http://www.68k.org/~degs/nextkeyboard.html
|
|
Keycodes from http://ftp.netbsd.org/pub/NetBSD/NetBSD-release-6/src/sys/arch/next68k/dev/
|
|
|
|
This software is licensed with a Modified BSD License.
|
|
All of this is supposed to be Free Software, Open Source, DFSG-free,
|
|
GPL-compatible, and OK to use in both free and proprietary applications.
|
|
Additions and corrections to this file are welcome.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright
|
|
notice, this list of conditions and the following disclaimer.
|
|
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in
|
|
the documentation and/or other materials provided with the
|
|
distribution.
|
|
|
|
* Neither the name of the copyright holders nor the names of
|
|
contributors may be used to endorse or promote products derived
|
|
from this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include <util/atomic.h>
|
|
#include <util/delay.h>
|
|
#include "next_kbd.h"
|
|
#include "debug.h"
|
|
|
|
static inline void out_lo(void);
|
|
static inline void out_hi(void);
|
|
static inline void query(void);
|
|
static inline void reset(void);
|
|
static inline uint32_t response(void);
|
|
|
|
/* The keyboard sends signal with 50us pulse width on OUT line
|
|
* while it seems to miss the 50us pulse on In line.
|
|
* next_kbd_set_leds() often fails to sync LED status with 50us
|
|
* but it works well with 51us(+1us) on TMK converter(ATMeaga32u2) at least.
|
|
* TODO: test on Teensy and Pro Micro configuration
|
|
*/
|
|
#define out_hi_delay(intervals) \
|
|
do { \
|
|
out_hi(); \
|
|
_delay_us((NEXT_KBD_TIMING + 1) * intervals); \
|
|
} while (0);
|
|
#define out_lo_delay(intervals) \
|
|
do { \
|
|
out_lo(); \
|
|
_delay_us((NEXT_KBD_TIMING + 1) * intervals); \
|
|
} while (0);
|
|
#define query_delay(intervals) \
|
|
do { \
|
|
query(); \
|
|
_delay_us((NEXT_KBD_TIMING + 1) * intervals); \
|
|
} while (0);
|
|
#define reset_delay(intervals) \
|
|
do { \
|
|
reset(); \
|
|
_delay_us((NEXT_KBD_TIMING + 1) * intervals); \
|
|
} while (0);
|
|
|
|
void next_kbd_init(void) {
|
|
out_hi();
|
|
NEXT_KBD_IN_DDR &= ~(1 << NEXT_KBD_IN_BIT); // KBD_IN to input
|
|
NEXT_KBD_IN_PORT |= (1 << NEXT_KBD_IN_BIT); // KBD_IN pull up
|
|
|
|
query_delay(5);
|
|
reset_delay(8);
|
|
|
|
query_delay(5);
|
|
reset_delay(8);
|
|
}
|
|
|
|
void next_kbd_set_leds(bool left, bool right) {
|
|
cli();
|
|
out_lo_delay(9);
|
|
|
|
out_hi_delay(3);
|
|
out_lo_delay(1);
|
|
|
|
if (left) {
|
|
out_hi_delay(1);
|
|
} else {
|
|
out_lo_delay(1);
|
|
}
|
|
|
|
if (right) {
|
|
out_hi_delay(1);
|
|
} else {
|
|
out_lo_delay(1);
|
|
}
|
|
|
|
out_lo_delay(7);
|
|
out_hi();
|
|
sei();
|
|
}
|
|
|
|
#define NEXT_KBD_READ (NEXT_KBD_IN_PIN & (1 << NEXT_KBD_IN_BIT))
|
|
uint32_t next_kbd_recv(void) {
|
|
// First check to make sure that the keyboard is actually connected;
|
|
// if not, just return
|
|
// TODO: reflect the status of the keyboard in a return code
|
|
if (!NEXT_KBD_READ) {
|
|
sei();
|
|
return 0;
|
|
}
|
|
|
|
query();
|
|
uint32_t resp = response();
|
|
|
|
return resp;
|
|
}
|
|
|
|
static inline uint32_t response(void) {
|
|
cli();
|
|
|
|
// try a 5ms read; this should be called after the query method has
|
|
// been run so if a key is pressed we should get a response within
|
|
// 5ms; if not then send a reset and exit
|
|
uint8_t i = 0;
|
|
uint32_t data = 0;
|
|
uint16_t reset_timeout = 50000;
|
|
while (NEXT_KBD_READ && reset_timeout) {
|
|
asm("");
|
|
_delay_us(1);
|
|
reset_timeout--;
|
|
}
|
|
if (!reset_timeout) {
|
|
reset();
|
|
sei();
|
|
return 0;
|
|
}
|
|
_delay_us(NEXT_KBD_TIMING / 2);
|
|
for (; i < 22; i++) {
|
|
if (NEXT_KBD_READ) {
|
|
data |= ((uint32_t)1 << i);
|
|
/* Note:
|
|
* My testing with the ATmega32u4 showed that there might
|
|
* something wrong with the timing here; by the end of the
|
|
* second data byte some of the modifiers can get bumped out
|
|
* to the next bit over if we just cycle through the data
|
|
* based on the expected interval. There is a bit (i = 10)
|
|
* in the middle of the data that is always on followed by
|
|
* one that is always off - so we'll use that to reset our
|
|
* timing in case we've gotten ahead of the keyboard;
|
|
*/
|
|
if (i == 10) {
|
|
i++;
|
|
while (NEXT_KBD_READ)
|
|
;
|
|
_delay_us(NEXT_KBD_TIMING / 2);
|
|
}
|
|
} else {
|
|
/* redundant - but I don't want to remove if it might screw
|
|
* up the timing
|
|
*/
|
|
data |= ((uint32_t)0 << i);
|
|
}
|
|
_delay_us(NEXT_KBD_TIMING);
|
|
}
|
|
|
|
sei();
|
|
|
|
return data;
|
|
}
|
|
|
|
static inline void out_lo(void) {
|
|
NEXT_KBD_OUT_PORT &= ~(1 << NEXT_KBD_OUT_BIT);
|
|
NEXT_KBD_OUT_DDR |= (1 << NEXT_KBD_OUT_BIT);
|
|
}
|
|
|
|
static inline void out_hi(void) {
|
|
/* input with pull up */
|
|
NEXT_KBD_OUT_DDR &= ~(1 << NEXT_KBD_OUT_BIT);
|
|
NEXT_KBD_OUT_PORT |= (1 << NEXT_KBD_OUT_BIT);
|
|
}
|
|
|
|
static inline void query(void) {
|
|
out_lo_delay(5);
|
|
out_hi_delay(1);
|
|
out_lo_delay(3);
|
|
out_hi();
|
|
}
|
|
|
|
static inline void reset(void) {
|
|
out_lo_delay(1);
|
|
out_hi_delay(4);
|
|
out_lo_delay(1);
|
|
out_hi_delay(6);
|
|
out_lo_delay(10);
|
|
out_hi();
|
|
}
|