214 lines
No EOL
6.2 KiB
C
214 lines
No EOL
6.2 KiB
C
#include "ch.h"
|
|
#include "hal.h"
|
|
|
|
#include "led.h"
|
|
#include "sleep_led.h"
|
|
|
|
/* All right, we go the "software" way: timer, toggle LED in interrupt.
|
|
* Based on hasu's code for AVRs.
|
|
* Use LP timer on Kinetises, TIM14 on STM32F0.
|
|
*/
|
|
|
|
#if defined(KL2x) || defined(K20x)
|
|
|
|
/* Use Low Power Timer (LPTMR) */
|
|
# define TIMER_INTERRUPT_VECTOR KINETIS_LPTMR0_IRQ_VECTOR
|
|
# define RESET_COUNTER LPTMR0->CSR |= LPTMRx_CSR_TCF
|
|
|
|
#elif defined(STM32F0XX)
|
|
|
|
/* Use TIM14 manually */
|
|
# define TIMER_INTERRUPT_VECTOR STM32_TIM14_HANDLER
|
|
# define RESET_COUNTER STM32_TIM14->SR &= ~STM32_TIM_SR_UIF
|
|
|
|
#endif
|
|
|
|
#if defined(KL2x) || defined(K20x) || defined(STM32F0XX) /* common parts for timers/interrupts */
|
|
|
|
/* Breathing Sleep LED brighness(PWM On period) table
|
|
* (64[steps] * 4[duration]) / 64[PWM periods/s] = 4 second breath cycle
|
|
*
|
|
* http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63
|
|
* (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i }
|
|
*/
|
|
static const uint8_t breathing_table[64] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 4, 6, 10, 15, 23, 32, 44, 58, 74, 93, 113, 135, 157, 179, 199, 218, 233, 245, 252, 255, 252, 245, 233, 218, 199, 179, 157, 135, 113, 93, 74, 58, 44, 32, 23, 15, 10, 6, 4, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
|
|
|
/* interrupt handler */
|
|
OSAL_IRQ_HANDLER(TIMER_INTERRUPT_VECTOR) {
|
|
OSAL_IRQ_PROLOGUE();
|
|
|
|
/* Software PWM
|
|
* timer:1111 1111 1111 1111
|
|
* \_____/\/ \_______/____ count(0-255)
|
|
* \ \______________ duration of step(4)
|
|
* \__________________ index of step table(0-63)
|
|
*/
|
|
|
|
// this works for cca 65536 irqs/sec
|
|
static union {
|
|
uint16_t row;
|
|
struct {
|
|
uint8_t count : 8;
|
|
uint8_t duration : 2;
|
|
uint8_t index : 6;
|
|
} pwm;
|
|
} timer = {.row = 0};
|
|
|
|
timer.row++;
|
|
|
|
// LED on
|
|
if (timer.pwm.count == 0) {
|
|
led_set(1 << USB_LED_CAPS_LOCK);
|
|
}
|
|
// LED off
|
|
if (timer.pwm.count == breathing_table[timer.pwm.index]) {
|
|
led_set(0);
|
|
}
|
|
|
|
/* Reset the counter */
|
|
RESET_COUNTER;
|
|
|
|
OSAL_IRQ_EPILOGUE();
|
|
}
|
|
|
|
#endif /* common parts for known platforms */
|
|
|
|
#if defined(KL2x) || defined(K20x) /* platform selection: familiar Kinetis chips */
|
|
|
|
/* LPTMR clock options */
|
|
# define LPTMR_CLOCK_MCGIRCLK 0 /* 4MHz clock */
|
|
# define LPTMR_CLOCK_LPO 1 /* 1kHz clock */
|
|
# define LPTMR_CLOCK_ERCLK32K 2 /* external 32kHz crystal */
|
|
# define LPTMR_CLOCK_OSCERCLK 3 /* output from OSC */
|
|
|
|
/* Work around inconsistencies in Freescale naming */
|
|
# if !defined(SIM_SCGC5_LPTMR)
|
|
# define SIM_SCGC5_LPTMR SIM_SCGC5_LPTIMER
|
|
# endif
|
|
|
|
/* Initialise the timer */
|
|
void sleep_led_init(void) {
|
|
/* Make sure the clock to the LPTMR is enabled */
|
|
SIM->SCGC5 |= SIM_SCGC5_LPTMR;
|
|
/* Reset LPTMR settings */
|
|
LPTMR0->CSR = 0;
|
|
/* Set the compare value */
|
|
LPTMR0->CMR = 0; // trigger on counter value (i.e. every time)
|
|
|
|
/* Set up clock source and prescaler */
|
|
/* Software PWM
|
|
* ______ ______ __
|
|
* | ON |___OFF___| ON |___OFF___| ....
|
|
* |<-------------->|<-------------->|<- ....
|
|
* PWM period PWM period
|
|
*
|
|
* R interrupts/period[resolution]
|
|
* F periods/second[frequency]
|
|
* R * F interrupts/second
|
|
*/
|
|
|
|
/* === OPTION 1 === */
|
|
# if 0
|
|
// 1kHz LPO
|
|
// No prescaler => 1024 irqs/sec
|
|
// Note: this is too slow for a smooth breathe
|
|
LPTMR0->PSR = LPTMRx_PSR_PCS(LPTMR_CLOCK_LPO)|LPTMRx_PSR_PBYP;
|
|
# endif /* OPTION 1 */
|
|
|
|
/* === OPTION 2 === */
|
|
# if 1
|
|
// nMHz IRC (n=4 on KL25Z, KL26Z and K20x; n=2 or 8 on KL27Z)
|
|
MCG->C2 |= MCG_C2_IRCS; // fast (4MHz) internal ref clock
|
|
# if defined(KL27) // divide the 8MHz IRC by 2, to have the same MCGIRCLK speed as others
|
|
MCG->MC |= MCG_MC_LIRC_DIV2_DIV2;
|
|
# endif /* KL27 */
|
|
MCG->C1 |= MCG_C1_IRCLKEN; // enable internal ref clock
|
|
// to work in stop mode, also MCG_C1_IREFSTEN
|
|
// Divide 4MHz by 2^N (N=6) => 62500 irqs/sec =>
|
|
// => approx F=61, R=256, duration = 4
|
|
LPTMR0->PSR = LPTMRx_PSR_PCS(LPTMR_CLOCK_MCGIRCLK) | LPTMRx_PSR_PRESCALE(6);
|
|
# endif /* OPTION 2 */
|
|
|
|
/* === OPTION 3 === */
|
|
# if 0
|
|
// OSC output (external crystal), usually 8MHz or 16MHz
|
|
OSC0->CR |= OSC_CR_ERCLKEN; // enable ext ref clock
|
|
// to work in stop mode, also OSC_CR_EREFSTEN
|
|
// Divide by 2^N
|
|
LPTMR0->PSR = LPTMRx_PSR_PCS(LPTMR_CLOCK_OSCERCLK)|LPTMRx_PSR_PRESCALE(7);
|
|
# endif /* OPTION 3 */
|
|
/* === END OPTIONS === */
|
|
|
|
/* Interrupt on TCF set (compare flag) */
|
|
nvicEnableVector(LPTMR0_IRQn, 2); // vector, priority
|
|
LPTMR0->CSR |= LPTMRx_CSR_TIE;
|
|
}
|
|
|
|
void sleep_led_enable(void) {
|
|
/* Enable the timer */
|
|
LPTMR0->CSR |= LPTMRx_CSR_TEN;
|
|
}
|
|
|
|
void sleep_led_disable(void) {
|
|
/* Disable the timer */
|
|
LPTMR0->CSR &= ~LPTMRx_CSR_TEN;
|
|
}
|
|
|
|
void sleep_led_toggle(void) {
|
|
/* Toggle the timer */
|
|
LPTMR0->CSR ^= LPTMRx_CSR_TEN;
|
|
}
|
|
|
|
#elif defined(STM32F0XX) /* platform selection: STM32F0XX */
|
|
|
|
/* Initialise the timer */
|
|
void sleep_led_init(void) {
|
|
/* enable clock */
|
|
rccEnableTIM14(FALSE); /* low power enable = FALSE */
|
|
rccResetTIM14();
|
|
|
|
/* prescale */
|
|
/* Assuming 48MHz internal clock */
|
|
/* getting cca 65484 irqs/sec */
|
|
STM32_TIM14->PSC = 733;
|
|
|
|
/* auto-reload */
|
|
/* 0 => interrupt every time */
|
|
STM32_TIM14->ARR = 3;
|
|
|
|
/* enable counter update event interrupt */
|
|
STM32_TIM14->DIER |= STM32_TIM_DIER_UIE;
|
|
|
|
/* register interrupt vector */
|
|
nvicEnableVector(STM32_TIM14_NUMBER, 2); /* vector, priority */
|
|
}
|
|
|
|
void sleep_led_enable(void) {
|
|
/* Enable the timer */
|
|
STM32_TIM14->CR1 = STM32_TIM_CR1_CEN | STM32_TIM_CR1_URS;
|
|
/* URS => update event only on overflow; setting UG bit disabled */
|
|
}
|
|
|
|
void sleep_led_disable(void) {
|
|
/* Disable the timer */
|
|
STM32_TIM14->CR1 = 0;
|
|
}
|
|
|
|
void sleep_led_toggle(void) {
|
|
/* Toggle the timer */
|
|
STM32_TIM14->CR1 ^= STM32_TIM_CR1_CEN;
|
|
}
|
|
|
|
#else /* platform selection: not on familiar chips */
|
|
|
|
void sleep_led_init(void) {}
|
|
|
|
void sleep_led_enable(void) { led_set(1 << USB_LED_CAPS_LOCK); }
|
|
|
|
void sleep_led_disable(void) { led_set(0); }
|
|
|
|
void sleep_led_toggle(void) {
|
|
// not implemented
|
|
}
|
|
|
|
#endif /* platform selection */ |