29 lines
1.6 KiB
Markdown
29 lines
1.6 KiB
Markdown
|
# unicomp/classic_ultracl_post_2013/overnumpad_1xb
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Will support the following Unicomp Classic and Ultra Classic keyboards:
|
||
|
|
* 104-key ANSI and 105-key ISO keyboards with post-2013 bottom row are supported.
|
||
|
|
* It will likely also support 103-key ANSI or 104-key ISO keyboard variants (not tested) (these are the keyboards with no menu key)
|
||
|
|
* At this point in time it's unclear if it supports 101-key keyboard variants built after 2013.
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [Purdea Andrei](https://github.com/purdeaandrei)
|
||
|
|
* Hardware Supported: OverNumpad controller v1.Xb
|
||
|
|
* Hardware Availability:
|
||
|
|
* [controller](https://github.com/purdeaandrei/overnumpad_controller_1xb)
|
||
|
|
* [keyboard](https://www.pckeyboard.com/)
|
||
|
|
|
||
|
|
To place the keyboard into bootloader mode in order to flash it, hold the ESC key while plugging the board in.
|
||
|
|
It's possible to make this feature not work, by flashing the wrong firmware onto the keyboard.
|
||
|
|
If that happens, open up the keyboard, and press the RST&PROG button to enter bootloader mode.
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make unicomp/classic_ultracl_post_2013/overnumpad_1xb:default
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
make unicomp/classic_ultracl_post_2013/overnumpad_1xb:default:flash
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|