|
||
---|---|---|
config | ||
data/fonts | ||
extensions | ||
host/Qiao-MacBook | ||
init-extension | ||
init-package | ||
snippets@60dd937aa3 | ||
tests | ||
tools | ||
.gitignore | ||
.gitmodules | ||
.projectile | ||
init.el | ||
my-funcs.el | ||
my-keybindings.el | ||
my-macros.el | ||
packages.el | ||
post-extensions.el | ||
pre-extensions.el | ||
README.md |
Spacemacs
The best editor is not Emacs nor Vim, the best editor is Emacs+Vim !
Table of Contents generated with DocToc
- Goal
- Who can benefit from this ?
- Install
- Packages and Extensions Organization
- How it works
- How to switch to normal mode efficiently ?
- Evil plugins
- How to use it ?
- TODO list
Goal
These configuration files try to bring the power of Vim modal editing to
the powerful Emacs editing platform and some more power with the SPC
key
as a leader key.
To achieve this, Spacemacs
uses two modes heavily:
Who can benefit from this ?
Spacemacs
is first intended to be used by Vim users who want to go to the
next level by using Emacs.
It is also a good fit for people wanting to lower the risk of RSI induced by the default Emacs key bindings.
People wanting to learn a new way to edit files or wanting to learn Vim key bindings.
As a note side, if you are a programmer and you don't know Vim key bindings yet, I deeply recommend you to learn the basics as recommended in Sacha Chua's one-page guide about how to learn Emacs.
Install
Spacemacs
is only tested with Emacs 24.3.1
.
Backup your current .emacs.d
.
Clone this repository in your home folder:
cd ~
mv .emacs.d .emacs.bak
git clone http://github.com/syl20bnr/spacemacs .emacs.d
cd .emacs.d
mkdir .desktop
Get the sub-modules:
cd ~/.emacs.d
git submodule init
git submodule update
Packages and Extensions Organization
Modes/libraries are separated into two categories:
- package: packages installed from
package.el
compliant repositories. - extension: modes directly fetched from git repositories (as sub-modules)
There are two types of extensions:
- pre-extensions: loaded before packages
- post-extensions: loaded after packages
Modes/libraries are listed in the following three files depending whether they are packages, pre-extensions or post-extensions:
- packages.el
- pre-extensions.el
- post-extensions.el
A package or extension has a corresponding init-....el
file responsible for
its initialization, those files are stored respectively in the init-package
and init-extension
directories.
init-....el
files lazy load the modes by using the use-package
macro.
How it works
Spacemacs
uses the evil
mode to emulate Vim key bindings. This is a very
complete emulation (the most complete I've seen yet).
Spacemacs
heavily uses the evil-leader
mode which brings the Vim leader key to
the Emacs world.
This leader key is commonly set to ,
by Vim users, in Spacemacs
the leader key
is set on SPC
(space bar, this is why spacemacs
). This key is the most
accessible key on a keyboard and it is pressed with the thumb which is a good
choice to lower the risk of RSI.
So with Spacemacs
there is no need to remap your keyboard modifiers to attempt to
reduce the risk of RSI, every command can be executed very easily while you are
in normal
mode by pressing the SPC
leader key, here are a few examples:
Save a buffer:
<SPC> f s
Save all opened buffers:
<SPC> f S
Open (switch) to a buffer with helm
:
<SPC> b s
How to switch to normal mode efficiently ?
One of the main design flaw in Vim key bindings is that you often have to press
the ESC
key to return to normal
mode and ESC
key is very far from the
home row.
The popular way to avoid this is to replace ESC
by jj
pressed rapidly. In
Spacemacs
you have to press fd
quickly by default.
fd
also works to quit minibuffer prompts.
Note that keychords.el mode is not used to achieve this, the
reasons for this is latency and the fact that keychords wants you to press
several keys almost at the same time which is something very difficult to master
correctly on a keyboard. Spacemacs
has a special function called fd-trigger
to
handle the fd
key sequence and fix the above keychords issues.
Evil plugins
Spacemacs
ships with the following evil plugins:
- evil-little-word: port of camelcasemotion.vim.
- evil-operator-comment: comment/uncomment with
CC
- evil-matchit: port of matchit.vim
- evil-visualstar: search for current selection with
*
- surround: port of surround.vim
How to use it ?
Every sequences must be performed in normal
mode.
Executing Vim and Emacs commands
Vim commands are execute as usual with the :
key.
To execute an Emacs command:
<SPC> :
Key bindings help
A list of all the key bindings can be accessed by pressing:
<SPC> ?
To narrow the list to Spacemacs
specific key bindings set the pattern to SPC
About helm
Spacemacs
tries to use helm as much as possible.
helm is coupled to popwin so helm
window always appears in
a new temporary windows at the bottom.
The following helm
modes are installed with Spacemacs
:
- helm-swoop ( h s): A very cool mode to search for occurrences within a file and edit the result.
- helm-css-scss ( h c): for quick navigation in CSS.
- helm-c-yasnippet ( a y): select snippets.
- helm-themes ( h t): select a theme
- helm-projectile ( p f): select files within a projectile project.
- helm-descbinds ( ?): show key bindings.
- cofi/helm-flyspell-correct ( s c): choose a corrected word.
Navigation (point/cursor)
Navigation is performed using the Vi key bindings hjkl
.
The current line of the cursor is always at the center of the buffer. This effect is achieved with centered-cursor mode. It can be toggled on and off with:
<SPC> z z
To move quickly up a buffer:
H
To move quickly down a buffer:
L
Go to beginning/end of line:
<SPC> j h
<SPC> j l
ace-jump mode
I often use ace-jump
mode so this key binding does not require the evil
leader, just press:
,
To go back to the previous location (pop mark):
<SPC> ,
Navigation (buffers/files)
Spacemacs
uses ido
for opening files since ido
way to navigate
the file system is better than helm
in my opinion (especially because ido
can
remember the last selected directories and buffers, maybe helm can do this ?).
ido
is also used to kill buffers.
Buffer manipulation commands start with b
and file manipulation with f
.
Open a file:
<SPC> f f
Save a file:
<SPC> f s
Switch to a buffer:
<SPC> b s
Kill a buffer:
<SPC> b k
Kill all other buffer:
<SPC> b K
Rename a buffer:
<SPC> b r
Delete a buffer (well a file...):
<SPC> b d
Move a buffer to the left:
<SPC> b m h
Window manipulation
Window manipulation commands start with w
.
Split windows are dynamically resized depending on whether they are selected or
not. Resizing is performed by the golden-ratio mode.
Every window has a number displayed at the start of the mode-line and can
be accessed using <SPC> number
. For instance to go to the window number 2,
you can press:
<SPC> 2
Split a window horizontally:
<SPC> w b
Split a window vertically:
<SPC> w v
Close a window:
<SPC> w c
Undo close window:
<SPC> w u
Toggle window dedication (dedicated window cannot be used by a mode):
<SPC> w d
Rotate windows clockwise or counter-clockwise:
<SPC> w r
<SPC> w R
Maximize/minimize a window:
<SPC> w m
Additional text manipulation commands
Text related commands start with x
.
To move a line of text up or down:
<SPC> x m k
<SPC> x m j
To swap (transpose) two letters/words/lines:
<SPC> x t c
<SPC> x t w
<SPC> x t l
To make the selected text upper case or lower case:
<SPC> x U
<SPC> x u
To translate a word at point with google translate
:
<SPC> x g t
Spell checking
Spell checking commands start with s
.
Correct word at point with helm
:
<SPC> s c
Go to the next spell check error:
<SPC> s n
Change dictionary language:
<SPC> s d
Color theme
Spacemacs
uses this Solarized theme.
It is possible to cycle between the light and dark themes with.
<SPC> c t
UI elements
The mode line is a powerline customized to show the window number and to colorize the current editing mode.
Some UI indicators can be toggled on and off:
Fill column indicator for 80 columns wide buffers:
<SPC> t 8
I suggest to not always display it since it slow down Emacs.
Toggle line numbers:
<SPC> t n
Idem, I suggest to display this only if required for performance reason.
Toggle fringe mode:
<SPC> t f
Minor Modes
Spacemacs
uses diminish mode to reduce the size of minor mode
indicators:
- Ⓐ -> auto-complete mode
- Ⓗ -> auto-highlight-symbol mode
- Ⓒ -> centered-cursor mode
- eⓅ -> e-project mode
- Ⓟ -> projectile mode
- Ⓕ -> flymake mode
- Ⓢ -> flyspell mode
- (Ⓢ) -> smartparens mode
- (Ⓟ) -> paredit mode
- Ⓨ -> yasnippet mode
The minor mode area can be toggled on and off with:
<SPC> t m
Note that in terminal the regular indicators are used instead of the utf-8 ones.
Formatting
Spacemacs
leverage paredit
in all major modes by using smartparens mode.
To join the current line with the next line:
<SPC> j k
To split the current line at point and auto-indent:
<SPC> j j
To auto-indent the line below the current line and jump to it:
<SPC> j i
<SPC> j k
, <SPC> j j
and <SPC> j i
used together are very powerful.
To split a quoted string (ie. "Hello Emacs Hello Vim"
to "Hello Emacs"
and
"Hello Vim"
, but nobody wants to do that!):
<SPC> l CTRL+j
Ahah a modifier! It should be the only one.
Errors handling
Spacemacs
uses Flycheck to gives error feedback on the fly.
The checks are only performed at save time by default.
To go to the next/previous flycheck error:
<SPC> f n
<SPC> f p
To display the list of errors/warnings:
<SPC> f l
Could be great to turn this command into a toggle.
By the way l
is for lisp
.
Various
expand-region mode
initiate expand-region with:
<SPC> v
to expand region:
v
to contract:
V
to reset:
r
narrow region
narrow to a region:
<SPC> n r
widen a region:
<SPC> n w
auto-highlight-symbol mode
toggle the mode:
<SPC> t h
edit all highlighted symbols:
<SPC> h e
and more...
There are sets of key bindings for different major modes I'm using, the
convention is to start the major mode key sequences by M
.
See my-keybindings.el to explore for more key bindings.
TODO list
- Add a way to easily share/activate/deactivate sets of key bindings for major or minor modes key bindings (maybe by leveraging use-package ?).
- Add support for multiple-cursors mode.