There was an error in `linum-on` when `dotspacemacs-line-numbers` was set to
`'relative`.
- new function `spacemacs//linum-backward-compabitility` to test for old
supported values.
- Use an :around advice for `linum-on` instead of redefining it.
- move linum init time config to `:init` section of `use-package`
- fix relative linum initialization by testing if `dotspacemacs-line-numbers` is
a list first.
Also remove the docstring about SPC h SPC as it is already implied for the other
options in the dotfile.
Note that this commit modifies one condition, namely disabled mode condition.
It removes the first test:
(not (spacemacs/mplist-get dotspacemacs-line-numbers :enabled-for-modes))
as it is not necessary since we have a `or` in the enable-p condition. Disabled
modes will be checked only if the current major mode is not explicitly enabled
(as intented).
New functions in rst-sphinx:
- rst-sphinx-find-conf-py-path
- rst-sphinx-open-conf
- rst-sphinx-clean
- rst-sphinx-rebuild
Modified functions:
- rst-sphinx-compile takes now an optional argument to clean the project
- rst-sphinx-find-conf has been renamed to rst-sphinx-set-variables and now use
rst-sphinx-find-conf-py-path function
New key bindings:
- "cc" --> rst-sphinx-compile
- "cC" --> rst-sphinx-clean
- "cr" --> rst-sphinx-rebuild
- "gc" --> rst-sphinx-open-conf
- "o" --> rst-sphinx-target-open)))
There was no flycheck-credo package in the layer.
Although it was described in documentation, how to install credo.
This commit fixes documentation and adds flycheck-credo package.
Changed the buffer transient states formatting so that it matches
most of the other transient states.
Frontend
Reduced spacing:
- Between the keys and descriptions, from 2 to 1.
- Between both columns, from 4 to 2.
Backend
The first column didn't need the last two "^" (caret) characters.
Changed the last line so that "^^^^" starts below the first column.
Update the formatting of the SPC w . window manipulation
transient state panel.
Select column
Change "[0-9] window N", to "[0..9] window 0..9",
so that it matches the SPC "0..9 -> window 0..9" and
SPC b "1..9 -> buffer to window 1..9" combined entries.
Split column
Add "i" to the end of "vert", then it'll have the same number
of characters as "horiz", and the text will be aligned.
Resize column
Shorten "horizontally" and "vertically" to "horiz" and "verti",
it reduces the panels width slightly.
Other column
Shorten the horizontal line below the title, so that it matches
the longest key description.
Move [q] quit to the bottom of the column.
All columns
Equalize the horizontal spacing between the columns,
from: 2, 2, 3, 3, to 2 between all columns.
Updated entry for "show dotfiles at ranger startup" option.
Old variable had no effect (possibly deprecated)
Updated entry for "show previews literally" option.
Old variable had no effect (possibly mistype)
Cycle collection type was recently removed from `clj-refactor` as the
feature was migrated and rewritten in `clojure-mode`. The new feature
lets the user convert a collection into a specific collection type
instead of cycling through them.
To added shortcuts correspond to the shortcuts of this feature in
`clojure-mode` and placed in the refactor submenu.
Distribute spacemacs-theme with Spacemacs so we don't need to download the
package of the theme at startup. It was delaying the display of the home buffer.
Now Spacemacs fallback to spacemacs-dark theme if the user theme cannot be
applied. Spacemacs then tries to install and reapply the user theme. If
successful, at the subsequent startups the user theme is applied right away
instead of spacemacs-dark. If the installation failed then we display a warning
informing the user and suggesting some actions.
There is now no package left to be installed manually at the start of Spacemacs.
Getting FAQ candidates requires org to be loaded which in turn requires to
load magit (via orgit) etc...
This commit moves the FAQ helm source to a new feature helm-spacemacs-faq and
removes the FAQ source from SPC h SPC so the FAQs are only available as a helm
source via SPC h f.
But we have still the FAQ org file entry in SPC h SPC so it is easy to open
the file from the main help key binding.
An active evil-visual-block selection, uniquified the whole buffer, this
checks either region-active-p or evil-visual-state-p, now it sorts the
selected lines.
The comment was also updated with "a" before "region" and "the" before
"current buffer".
Hide properties in space-doc-mode to allow the use of `CUSTOM_ID` tags in
documentation for correct link exporting, as discussed in #8054, #8136
and #8138. Complementary the latter two PR:s.
https://github.com/syl20bnr/spacemacs/issues/8043
"Go to definition" should go to the definition - meaning, where the function is defined in the source code.
I am for changing the default keybinding to `slime-edit-definition` because it fulfills this - allows the user to see the source code for a given function.
`slime-inspect-definition` does not open the source code - it opens the SLIME inspector with the function **object** open in the inspector. While the function **object** contains some valuable data, it does not contain the *definition* itself - which is what the user wants in this case.
Actually, revert @jgertm's change that I asked to make. As @bmag explained, this
is very useful key binding that is similar to C-c C-c as it allows to quickly
access functionality by pressing `dotspacemacs-major-mode-leader-key` twice.
Also note that `dotspacemacs-major-mode-leader-key` can be nil, that's why we
have to handle this value as well.
This fixes an issue where default jump handler, like dump-jump-go runs
in sync and omnisharp-go-to-definition is not able to actually go to
definition until it completes thus slowing down the completion process.
A similar issue (for C++) was fixed in syl20bnr/spacemacs#6904
winum.el is an heavily extended and partly rewritten version of
window-numbering.el.
Among other things it allows window numbers to be shared across frames,
thus improving multi-screen user experience.
Enabling a company backend for a specific mode was a tedious tasks with code
scattered at different locations, one for local variable definitions, one for
company hook function definitions and another where the backends were pushed to
the local variables (which was problematic, since we ended up pushing the same
backends over and over again with `SPC f e R`, pushes have been replaced by
add-to-list calls in the new macro).
All these steps are now put together at one place with the new macro
spacemacs|add-company-backends, check its docstring for more info on its
arguments.
This macro also allows to define arbitrary buffer local variables to tune
company for specific modes (similar to layer variables via a keyword :variables)
The code related to company backends management has been moved to the
auto-completion layer in the funcs.el file. A nice side effect of this move is
that it enforces correct encapsulation of company backends related code. We can
now easily detect if there is some configuration leakage when the
auto-completion layer is not used. But we loose macro expansion at file loading
time (not sue it is a big concern though).
The function spacemacs|enable-auto-complete was never used so it has been
deleted which led to the deletion of the now empty file core-auto-completion.el.
The example in LAYERS.org regarding auto-completion is now out of date and has
been deleted. An example to setup auto-completion is provided in the README.org
file of the auto-completion layer.
Move add-company-hook calls to correct init functions (only css backend is from
company package, the others are from company-web).
Correctly add company backends for jade and slim. Jade has been renamed to
Pug , there is no guarantee at all that jade references still work. To check.
- add new bindings to move and swap buffers, and switch active window,
by number
- change kill buffer shortcut to d for consistency
- Change docs appropriately
The `pyvenv-mode` doesn't provide a list of available virtual
environments. So it's not currently possible to check if the
provided virtualenv name is available
Removed the variable p2, it was defined and assigned, but never used.
Removed two progn expressions that wasn't needed.
Implemented bmag's suggestions:
Changed "if" to "when", and removed a superflous p1 assignment.
spacemacs/alternate-window was suggested to switch between the last selected
window, or the window-analog of SPC TAB (spacemacs/alternate-buffer). This is
part of a larger family of functions, such as spacemacs/jump-to-last-layout on
SPC l TAB and eyebrowse-last-window-config on SPC l w TAB.
Resolves#7845
Important evil advices for eval-last-sexp were removed for smartparens users,
it made eval-last-sexp not working correctly in normal state by evaluating the
sexp before the evil cursor and it was impossible to evaluate an sexp when the
cursor was on the last character of a line.
Also add SPC m e C which will execute the first defun or setq sexp encountered
before point.
