Fixes some edge cases like SPC f e R performed after SPC h SPC which
could wrongly install or uninstall packages.
Side effects is contained using the variable
configuration-layer--package-properties-read-onlyp, if non nil then
properties value of a package cannot be overwritten.
Calling multiple times configuration-layer/make-package appends the
same layers to :owners, :pre-layers and :post-layers slot.
Use object-add-to-list instead of push.
Add some tests and mock some warning messages.
Rename configuration-layers/make-packages to
configuration-layers/make-packages-from-layers
Move all package initialization logic to configuration-layers/make-package
instead of having it split between make-packages and make-package.
Hook semantic is to be used with run-hooks API and run all hooks
sequentially, jump list semantic is different since the running
functions are not guaranteed to be executed so we prefer using regular
list API to manage jump-lists.
Rename dotspacemacs-download-packages to dotspacemacs-install-packages
to better reflect the changes in the previous commit.
Also change the value 'used to 'used-only (note that 'used is still
supported for backward compatibility).
See end of this message for important breaking changes.
Previous behavior was to configure any installed package which caused
a lot of bad side effects and could make spacemacs unusable. This
behavior made little sense and does not fit with spacemacs.
This commit fixes this behavior by separating installed packages from
configured packages. In short dostspacemacs-download-packages variable
now only affect package installation. Packages are now configured if and
only if they are effectively *used* (i.e. listed in variable
dotspacemacs-configuration-layers or dotspacemacs-additional-packages).
IMPORTANT CHANGE: functions `configuration-layer/declare-used-layer` and
`configuration-layer/declare-used-layers` have been removed. These
functions have been introduced in develop branch only so the impact
should be minimal.
For emacs 24.5 packages will be installed in .emacs.d/elpa/24.5, for
emacs 24.4 packages will be installed in .emacs.d/elpa/24.4, etc.
For a user that uses several emacs versions with the same config, the
packages for version X will be in .emacs.d/elpa/X and the packages for
version Y will be in .emacs.d/elpa/Y. This is instead of using the same
.emacs.d/elpa and possibly having copmiled elisp packages the are
incompatible with one of the emacs versions in use.
Rollback directories are also separated by version:
.cache/.rollback/24.5, .cache/.rollback/24.4, etc.
TL;DR Should get 20~25% speed improvement on startup, should get a big
improvement when using ivy or helm SPC h SPC. Users with layers.el files
in their layers must use `configuration-layer/declare-used-layer`
instead of `configuration-layer/declare-layer`
The implementation of the layer system made heavy use of `object-assoc`
and `object-assoc-list` functions which are not efficient. This PR
mainly replaces those object lists with hash maps in order to index the
objects by their name and achieve an O(1) access time.
The old object lists `configuration-layer--layers` and
`configuration-layer--packages` have been each by two variables each:
- `configuration-layer--indexed-layers` which is a hash-map of all the
layer objects and `configuration-layer--used-layers` which is a list of
all _used_ layers symbols,
- symmetrically `configuration-layer--indexed-packages` which is a
hash-map of all the package objects and
`configuration-layer--used-packages` which is a list of all _used_
packages symbols.
The hash map `configuration-layer--layer-paths` is gone, now we create
directly layer objects when discovering the layers and set the :dir
property. Note that previously the layer paths were the parent directory
of the layer, now :dir is the layer path.
The function `configuration-layer//make-layer` is now similar to its
counterpart `configuration-layer//make-package` in the sense that it
takes an optional `obj` to be able to override its properties.
The functions `configuration-layer/declare-layer` and
`configuration-layer/declare-layers` now takes an optional parameter
`usedp` in order to declare used or not used layers. For convenience
new functions have been added: `configuration-layer/declare-used-layer`
and `configuration-layer/declare-used-layers`, users _must_ update all
occurrences of `configuration-layer/declare-layer` by
`configuration-layer/declare-used-layers` in their `layers.el` files.
`helm-spacemacs-help` and `ivy-spacemacs-help` are updated to match the
changes in `core-configuration-layer.el`.
Rename some variables to make them more explicit:
`configuration-layer-no-layer` -> `configuration-layer-exclude-all-layers`
`configuration-layer-distribution` -> `configuration-layer-force-distribution`
Providing a min-version allows to fetch the elpa version of a built-in
package. For intance to install python mode from GNU elpa, add to
the dotspacemacs-additional-packages:
(python :location elpa :min-version "0.25.2")
With this new variable, user can load spacemacs anywhere, e.g.
"~/.emacs.d/spacemacs/". Only user's cache directory is still hard-coded
as "~/.emacs.d/.cache/". If user want to use spacemacs this way, drop
one line as the below in "~/.emacs.d/init.el":
(setq spacemacs-start-directory "~/.emacs.d/spacemacs/")
(load-file (concat spacemacs-start-directory "init.el"))
Old implementation excluded package that were not selected, this
implementation does not excluded them, it simply ignore it in the
layer where they are not selected. This reimplementation comes from
a refactor of the way packages.el files are loaded, instead of loading
these files at the moment of resolving the list of used packages, they
are now loaded when making the layer objects. A neat consequence is that
side effects is better confined and the configuration-layer/get-packages
is now pure (at least a lot more pure than before).
In the `cfgl-layer` class the slot `:user-packages` has been renamed
to `:selected-packages` which defaults to `'all` meaning that all
the packages in `:packages` are selected. `:selected-packages` value
is given by the new function `configuration-layer//select-packages`.
Effectively selected packages are given by a new method for `cfgl-layer`
class called `cfgl-layer-get-packages`.
Tests have been updated to reflect the changes.
Also documentation on configuration layer declaration in the dotfile
section of DOCUMENTATION.org has been greatly improved (I hope) and
reflect the last feature added to the
`dotspacemacs-configuration-layers` list.
I had a duplicated layer, but the message that's printed broke spacemacs starting up because it was a format string but wasn't in a `format` form. Simple fix. Spacemacs works again! Yay!
This issue was introduced in c0851ddcb3, according to a quick `git bisect`. :)
The car of :owners is the real owner.
Now we can easily gather the list of all owners of a package.
Also fix unit tests about missing spacemacs-insecure variable.
Revert "Parse CLI args after dotspacemacs/init"
This reverts commit 0a35502de4.
We cannot delay the parsing of CLI params since we need their values
early during the loading process (i.e. debug info).
Replace the previous commit with a new variable `spacemacs-insecure`
which takes the value of --insecure boolean parameter.
- Use completing-read when called interactively
- Check for string locations in addition to built-in etc.
- Don’t double-princ on/off for toggles
- Bind to SPC hdP
This new variable replace dotspacemacs-delete-orphan-packages
It defines the behaviour of Spacemacs when downloading packages.
Possible values are `used', `used-but-keep-unused' and `all'.
- `used' will download only explicitly used packages and remove any
unused packages as well as their dependencies.
- `used-but-keep-unused' will download only the used packages but won't
delete them if they become unused.
- `all' will download all the packages regardless if they are used or
not and packages won't be deleted by Spacemacs.
Default value is `used`.
The new layer file `layers.el` is used to declared additional layers.
It is like the sibling of packages.el except that for now it does not
take a list (can do this in a futur commit).
The new order for file loading is the following:
layers.el > packages.el > funcs.el > config.el > keybindings.el
Since packages.el relies on some undefined stuff encapsulated
in init functions, it is not meant to be byte compiled. OTOH funcs.el
(where lies most of the computation added by a package config) should
be compilable.
Since we load packages.el very early it is not possible to use
`configuration-layer/package-usedp` in funcs.el.
This commit also fixes the tests.
Change the semantic of the files for a better control over the
configuration (like being able to use package-usedp function to
guard package configuration and function definition).
This is a big change!
The list of packages of the layer must now be placed in config.el
packages.el only contains pre-init, init and post-init functions
Now both packages.el and funcs.el can use
configuration-layer/package-usedp which is much more powerful than
just configuration-layer/layer-usedp.
Also merging into one file the layer variable and the list of packages
make sense (in this case config.el).
It also means that we can quickly load all the packages declared in
all layer for helm and ivy sources by just loading the config.el file.
Expect some regressions introduced by this change, like the helm
and ivy sources, they will be fixed in other commits.
--no-layer: desactive all the layers except the distribution layer
--distribution: allow the change temporarily the distribution
example
Start emacs with spacemacs-base and no layers:
emacs --no-layer --distribution spacemacs-base
New package :step 'bootstrap', this step happens before 'pre' packages.
A new layer names 'spacemacs-bootstrap' gather all the ':step bootstrap'
packages. This layer is special and is always the first element of
the variable 'configuration-layer--layers' which assure that all
bootstrap packages are configured first.
This new layer leverages the configuration layer system, removes the
clutter of package installations in the function 'spacemacs/init' and
isolate the bootstrap packages in one place.
Several things have been fixed:
- correctly set the :lazy-install flag on all packages of a lazy
installed layer
- correctly unset the :lazy-install flag when installing the packages
- sort the packages before installation and configuration
Fixes#5610
Make cfgl-layer-owned-packages return a list of package objects instead
of just package names.
Use this function to correctly excluded non owned package when flagging
package for lazy installation.
Fixes#5608
- only consider distant packages (i.e. requiring an installation)
- remove lazy install flag of a layer if at least one owned package is
already installed
Now Spacemacs will ask for layer installation when opening a file with
a known file type.
The auto-mode-alist entries are added by the file auto-layer.el in
the layers directory.
Easy insert of forms for lazy initialization can be done with the
interactive function configuration-layer//insert-lazy-install-form.
Change default value of dotspacemacs-enable-lazy-installation to t.
New function configuration-layer/insert-lazy-install-configuration
This function asks for a layer and then insert the lazy configuration
for all the packages owned by this layer.
It's not possible to get full backtraces in these instances when an
error is signaled, and I think we should generate full backtraces when
debug-on-error is enabled as a general rule.
I had to make this change at one place to track down the root of problem
2 in #5200.
Bug lurking in the code for quite some time, if both a package and
its dependencies were uninstalled then activation of the dependencies
could fail. This is resolved by explicitly asking package.el to install
the dependencies if required.
Add actions for both helm and ivy.
TODO:
- see TODO in function body
- replace SPC h d p (list all packages, use spacemacs describe when
it is a layer package, otherwise use vanilla describe).
This new keyword allows to add all the packages to the <layer>-packages
even when a package is not toggled on by a given layer variable.
This fixes an issue of the layer system where we had to choose between
discoverability (ie. the list of package in helm or ivy with SPC h SPC)
and installation of package (because any package listed in the variable
<layer>-packages were installed).
Fix bug: When the list of package names returned by
configuration-layer//get-uninstalled-packages contains a package that
isn't contained in configuration-layer--packages, then
configuration-layer//install-package throws "wrong-argument-type:
eieio-object-p nil" error at startup.
configuration-layer//install-packages catches it and prints it in the
home buffer.
New function configuration-layer/lazy-install to add support for
lazy installation of layers based on auto-mode-alist emacs mechanism.
This is essentially the Prelude feature but translated at the layer
level for Spacemacs.
New dotspacemacs variable to enable this feature:
dotspacemacs-enable-lazy-installation
For now this variable is set to nil by default, it will be put to t when
the feature is stable.
POC with elixir layer.
Start to isolate the list of packages. Also we want to define packages
function at the top level of an elisp file in order to not prevent
emacs from knowing where the functions are defined.
This commit has a POC made with elfeed and elixir layers.
Addressing #4586. The bug stops Spacemacs from listing rollback slots if
there exists a file (i.e. non-directory) in the rollback directory.
e.g. .emacs.d/.cache/.rollback/.DS_Store (common in OS X)
