problem:
`SPC f e U` checks if packages have updates.
But if the current buffer isn't the Spacemacs home buffer,
then the minibuffer just shows:
>Do you want to update 1 package(s)? (y or n)
There's no information about which packages have updates.
Canceling the prompt with: `n`
and switching to the messages buffer `SPC b m`, does list them.
>(Spacemacs) --> Found 1 package(s) to update:
>
>(Spacemacs) dap-mode
But it doesn't work to switch to the home buffer,
because that information was erased when the home buffer was refreshed.
solution:
Switch to the home buffer before checking for updates.
problem:
When the Emacs frame has the default window width (80 characters).
Then the current restart to update message:
Emacs has to be restarted to actually install the new version of the packages (SPC q r)
is cut off at the Emacs frames right edge:
Emacs has to be restarted to actually install the new version of the packages (S
solution:
Shortening the message:
Restart Emacs to install the updated packages. (SPC q r)
says the same thing, and keeps it within 80 characters.
Problem:
When the restart-emacs package is being updated.
The update packages restart message, still shows the (SPC q r) key binding even
though it doesn't work.
Cause:
The member function compared a string against a list of symbols.
A possible improvement:
Explain that the key binding won't work this time.
Before:
Emacs has to be restarted to actually install the new version of the packages (SPC q r).
After:
Emacs has to be restarted to actually install the new version of the packages
(SPC q r) won't work this time, because the restart-emacs package is being updated.
Added "configuration-layer//system-package?" based on package-delete
(pretty much a direct partial copy-paste) so that
"configuration-layer//package-delete" can check if package is a
system package
No crash on spacemacs boot (with unused system-package present).
Though right now "configuration-layer//package-delete" only ignores system
packages instead of reporting them. Not entierly what @nbraud proposed,
but insufficient err-logging is a significantly smaller issue.
Fixes#11160
- Removed the first line deletion.
This required the banners to have an empty first line.
- Removed the empty first line from the banners.
- Made sure that there is a single empty line between:
- The Version and Banner.
- Banner and Buttons ([?] [Homepage] ...).
- Version and Buttons (when the banner is hidden).
- Reordered the backend version insertion function call
to match the frontend Spacemacs buffer order.
- version
- banner
- buttons
Before it added:
- the banner
- then the buffers first line was removed
- then the version was added to the first line
- then the buttons were added at the bottom of the buffer
(there are more things added after the buttons,
but they haven't been changed by this commit).
- Removed the version insertion call in:
core/core-spacemacs-buffer.el
The changes above caused the version to appear twice
in the Spacemacs home buffer on startup.
I'm not sure if it has/had other uses.
This seems to be where it was first added to:
core-configuration-layer.el:
core: restore default mode line in home buffer
77161bd591
It was slightly modified in this commit:
core: defer distro insertion in home buffer
cd50d9c069
Here it was joined with the banner:
Fix version injection in home buffer
Don't inject version if banner is nil
a764eb4eb9
core: condensed versions into one string in left-hand side
spacemacs-version@emacs-version (distribution)
627e934453
- I had not seen that the version was joined with the
banner on purpose until now.
It seemed useful to still be able to see the versions
if one just wanted to hide the banner.
Therefore I opened this PR (it's been cherry-picked):
Uncouple version from banner in spacemacs buffer #11901https://github.com/syl20bnr/spacemacs/pull/11901
If there's a good reason to combine them again,
then the changes can be reverted.
There was a edge case with the declaration of the `lsp` layer in `layers.el`
files.
The `hy` layer depends on the `python` layer which in turn depends on the `lsp`
layer if and only if the `python-backend` layer variable is set to `lsp`.
When the `hy` layer was declared first then it declares the `python` layer
without its layer variables, thus the `lsp` layer was not declared because the
`python-backend` variable was not set.
The fix is to gather all the layer dependencies and resolve them only after all
the used layers have been declared.
* new function `configuration-layer/declare-layer-dependencies`
* replace all calls to `configuration-layer/declare-layer` by the new function
except for distribution layers (we declare layer dependencies right away in
distribution layers)
* modified function configuration-layer//stable-elpa-verify-archive
Add a `fatal-err` variable to handle critical erros that prevent the
verification to be attempted.
Use the function `epg-verify-file` instead of `epg-verify-string` which seems
to give more reliable results.
* modified function configuration-layer//stable-elpa-verify-archive
Gather errors along the verification steps and make a single call to
configuration-layer//stable-elpa-ask-to-continue at the end of the function.
Improve the scope of catched errors so now the users should be prompted when
GPG is not available on the system.
* new function configuration-layer//stable-elpa-disable-repository
* new function configuration-layer//stable-elpa-update-version-file
* new function configuration-layer//stable-elpa-delete-temporary-files
* new function configuration-layer//stable-elpa-ask-to-continue
* new function configuration-layer//stable-elpa-verify-archive
* new function configuration-layer//stable-elpa-disable-repository
* rename function configuration-layer/stable-elpa-download-tarball to
configuration-layer//stable-elpa-download-tarball
* new function configuration-layer/stable-elpa-init
* make the function configuration-layer/stable-elpa-version interactive
configuration-layer/stable-elpa-init is called from init.el.
This function then calls the other new function in more clear fashion than the
previous complicated configuration-layer/stable-elpa-download-tarball
The users are now prompt if they want to install the stable ELPA repository when
the verification of the archive failed.
* new variable configuration-layer-stable-elpa-archive
* add missing sub-directory "packages"
* update .lock file with above changes and bump to archive version 0.400
Commit 1c4f685b13 replaced
configuration-layer--layers (a list of cfgl-layer objects) with
configuration-layer--used-layers (a list of symbols). It also changed the
configuration-layer/insert-lazy-install-configuration function to use the
new variable, but it did not change the sort predicate. Consequently, the
function started failing:
Wrong type argument: listp, spacemacs-purpose
In addition, because sort is destructive, the function also deleted values
from configuration-layer--used-layers.
This commit fixes the sort predicate so that the function returns the
correct value, and it copies the list before sorting to avoid modifying
configuration-layer--used-layers.
* core/core-configuration-layer.el
(configuration-layer/insert-lazy-install-configuration): Use string<
as the sort predicate, and give sort a copy of the list.
See updated DOCUMENTATION.org and FAQ.org for more info.
* add core-env.el
* add library load-env-vars.el
* add bootstrap package dotenv-mode.el
* remove spacemacs-environment from bootstrap layer
* remove dotspacemacs variable dotspacemacs-import-env-vars-from-shell
* remove dotspacemacs variable dotspacemacs-improt-env-vars-shell-file-name
* add new key binding SPC f e e to open spacemacs.env file
* add new key binding SPC f e E to reload environment variable from env file
* add new key binding SPC f e C-e to re-initialize the env file from shell.
Spacemacs is slow to startup so better give it a not buggy progress bar :-)
* Move progress bar code to core-progress-bar.el file
* Remove the counters at the end of the progress bar
* Fix update of the progress bar value
* Fix progress bar size when staring Emacs maximized
Replace push with add-to-list in layer init functions and related code.
Modify spacemacs|add-toggle to check for and update an existing toggle in
spacemacs-toggles and only create a new toggle if none already existed.
Replace a conditional push onto erc-packages with use of :toggle.
When initializing which-key, set which-key-replacement-alist to its default
or customized setting before adding all the Spacemacs replacements. We
want to keep the stock replacements but avoid adding duplicates of the
Spacemacs replacements.
Replace the emacs-lisp-mode-hook lambda with a named function to avoid
adding duplicate hooks (which can add duplicate definitions of the
evil-surround pair).
It allows to put package variable with a default value set by spacemacs in
the layer variables. For instance to set treemacs position to the right, you can
now do it like this:
(treemacs :variables treemacs-position 'right)
* Fix various isolated typos
"apppend" -> "append"
"availabe" -> "available"
"Descripti using ternon" -> "Description"
"you have not them" -> "you don't have them"
"new on" -> "new one"
"plained" -> "curved"
"repel" -> "REPL"
"vairable" -> "variable"
* Fix a few errors in the CoffeeScript layer readme
Add a missing "the".
Correct a reference to the layer as "javascript" to "coffeescript".
Fix the syntax on the link to CoffeeLint.
* Fix typos: "dofile" -> "dotfile"
* Fix typos: "formated" and "formating"
"formated" -> "formatted"
"formating" -> "formatting"
* hy: Fix docstrings in funcs.el
Fix copy-and-pasted docstring text for
spacemacs/hy-shell-eval-current-form-and-go and
spacemacs/hy-shell-eval-region-and-go.
* Fix typos: "indendation" -> "indentation"
* Fix typos: "the the", "a a"
Fix duplicated (or misplaced) articles.
* Fix typos: "wether" -> "whether"
* Fix typos: "intialize" -> "initialize"
