If a layer is interactively installed by visiting a file the progress
file is updated without being properly initialized before causing a
division by zero.
Now `spacemacs/update-progress-bar` will ignore the call if
`spacemacs-loading-dots-chunk-threshold` is <= 0.
This commit contains the following original ones:
[dump] don't assume spacemacs start directory when dumping
[dump] dump to a temporary file and atomically rename it
[dump] cleanup after dumping
destructuring-bind is a macro in the deprecated package: cl
SPC-TAB calls: spacemacs/alternate-buffer
In the spacemacs-base distribution, it shows the message:
spacemacs/alternate-buffer: Symbol’s function definition is void: destructuring-bind
Also renamed three instances of destructuring-bind in the rirc layer.
The change was introduced by #13059. mocker.el is a large piece of legacy code
that depends on deprecated functionality in EIEIO and cannot be trivially
converted to use `cl-lib` by search and replace.
Problem:
The variable spacemacs-layouts-restrict-spc-tab is defined in:
~/.emacs.d/layers/+spacemacs/spacemacs-layouts/config.el
But the spacemacs-layouts layer isn't loaded by default in spacemacs-base.
Solution:
Check if the variable is bound.
- Removed the first line deletion.
This required the banners to have an empty first line.
- Removed the empty first line from the banners.
- Made sure that there is a single empty line between:
- The Version and Banner.
- Banner and Buttons ([?] [Homepage] ...).
- Version and Buttons (when the banner is hidden).
- Reordered the backend version insertion function call
to match the frontend Spacemacs buffer order.
- version
- banner
- buttons
Before it added:
- the banner
- then the buffers first line was removed
- then the version was added to the first line
- then the buttons were added at the bottom of the buffer
(there are more things added after the buttons,
but they haven't been changed by this commit).
- Removed the version insertion call in:
core/core-spacemacs-buffer.el
The changes above caused the version to appear twice
in the Spacemacs home buffer on startup.
I'm not sure if it has/had other uses.
This seems to be where it was first added to:
core-configuration-layer.el:
core: restore default mode line in home buffer
77161bd591
It was slightly modified in this commit:
core: defer distro insertion in home buffer
cd50d9c069
Here it was joined with the banner:
Fix version injection in home buffer
Don't inject version if banner is nil
a764eb4eb9
core: condensed versions into one string in left-hand side
spacemacs-version@emacs-version (distribution)
627e934453
- I had not seen that the version was joined with the
banner on purpose until now.
It seemed useful to still be able to see the versions
if one just wanted to hide the banner.
Therefore I opened this PR (it's been cherry-picked):
Uncouple version from banner in spacemacs buffer #11901https://github.com/syl20bnr/spacemacs/pull/11901
If there's a good reason to combine them again,
then the changes can be reverted.
The newly introduced function to compile an elpa package
was very much redundant with the existing recompile-elpa function.
I have adapted recompile-elpa so that it can be used for the helm action too.
In addition I have bound recompile-elpa to `SPC c C-c` to allow users to
easily recompile their entire elpa directory if the need arises.
I have also removed the error handling in the helm action in favor of
standard error reporting via the *Compile-Log* buffer.
How to use: `SCP h p` select package then `F3` or `C-z` and choose `Recompile`
Motivation: Some packages when compiling need other packages to be loaded first.
The pacakage maintainers should make sure of this requirement but sommetimes
they don't. It also doesn't help when Spacemacs is lazy loading and compiles
updated pacakges on startup. So the manual fix for this problem is recompile the
package once Spacemacs has fully loaded. This requires user go to the package
install location to delete elc files and then do a `spacemacs/recompile-elpa`.
This commit will do that chore for them.
This will make fixing the problem with `org-plus-contrib` or `dumb-jump` update
every now and then easier.
Fix several problems with environment variable caching.
First, if a shell printed extra output besides the command output,
spacemacs//init-spacemacs-env included the extra output in .spacemacs.env.
For example, a login shell could print a motd, which would be erroneously
included in .spacemacs.env. To avoid this, spacemacs//init-spacemacs-env
now redirects the command output to a temporary file and then reads the
file.
Second, spacemacs//init-spacemacs-env sorted lines using the entire
"name=value" string for each line whereas the correct behavior is to sort
only on the "name" part. To fix this, spacemacs//init-spacemacs-env now
uses sort-regexp-fields with an appropriate regexp to match the "name" part
and ignore the "value" part.
Third, although load-env-vars-set-env added all PATH settings in
.spacemacs.env to exec-path, it set PATH to the first PATH setting in
.spacemacs.env. Now load-env-vars-set-env sets PATH from exec-path so that
it will reflect that combined value.
Fourth, load-env-vars-set-env set exec-path and PATH without consideration
to the operating system's directory separator. Now load-env-vars-set-env
converts backslashes to forward slashes when adding path entries to
exec-path and converts forward slashes to backslashes when setting PATH on
platforms that use backslashes.
Fifth, load-env-vars-set-env now normalizes exec-path by deleting trailing
slashes from path entries, converting drive letters in path entries to
lower-case, and deleting duplicate path entries.
Sixth, Spacemacs no longer uses exec-path-from-shell, but a changelog entry
said that it did. This commit corrects the changelog entry, deletes
another outdated entry, and merges two entries that covered the same
functionality.
Finally, this commit corrects several typos and tries to improve wording in
several docstrings, messages, and comments.
* CHANGELOG.develop: Delete mention of exec-path-from-shell, which
Spacemacs no longer uses by default. Delete mention of
dotspacemacs-import-env-vars-from-shell and
dotspacemacs-import-env-vars-shell-file-name, which no longer exist.
Merge entries about synchronizing environment variables.
* core/core-env.el (spacemacs-ignored-environment-variables): Fix typos and
mention that the strings are regexps that are matched against the names of
environment variables.
(spacemacs//init-spacemacs-env): Use a temporary file rather than standard
output in order to avoid getting motd and other noise. Sort lines using
only environment variables' names, not their values. Better describe the
behavior with respect to spacemacs-ignored-environment-variables, duplicate
settings, and PATH. Try to make wording clearer.
(spacemacs/edit-env): Fix typos in the docstring.
* core/libs/load-env-vars.el (load-env-vars-set-env): Fix typos in the
docstring. Delete trailing slashes from path entries in exec-path, convert
drive letters to lower-case, delete duplicate path entries, and convert
backslashes to forward slashes when setting exec-path. Set PATH from
exec-path, converting forward slashes to backslashes on platforms that use
backslashes.
Sometimes it is useful to go directly to the last error message in the buffer.
This function recursively calls 'spacemacs/next-error until the last error is
reached.
The binding "SPC e l" is associated with it
There was a edge case with the declaration of the `lsp` layer in `layers.el`
files.
The `hy` layer depends on the `python` layer which in turn depends on the `lsp`
layer if and only if the `python-backend` layer variable is set to `lsp`.
When the `hy` layer was declared first then it declares the `python` layer
without its layer variables, thus the `lsp` layer was not declared because the
`python-backend` variable was not set.
The fix is to gather all the layer dependencies and resolve them only after all
the used layers have been declared.
* new function `configuration-layer/declare-layer-dependencies`
* replace all calls to `configuration-layer/declare-layer` by the new function
except for distribution layers (we declare layer dependencies right away in
distribution layers)
* modified function configuration-layer//stable-elpa-verify-archive
Add a `fatal-err` variable to handle critical erros that prevent the
verification to be attempted.
Use the function `epg-verify-file` instead of `epg-verify-string` which seems
to give more reliable results.
* modified function configuration-layer//stable-elpa-verify-archive
Gather errors along the verification steps and make a single call to
configuration-layer//stable-elpa-ask-to-continue at the end of the function.
Improve the scope of catched errors so now the users should be prompted when
GPG is not available on the system.
