"SPC d" was used for documentation related keybindings, such as in `dash`
layer.
But it's now used for `dap` layer exclusively.
Removing this won't cause any issue as `dap` layer would correctly set
the keybindings once it's loaded.
This enables navigating up in the `ivy-reverse-i-search` list with `C-k`.
The same rebinding from `C-k` to `C-M-k` to kill a list entry,
is also done in the `ivy-switch-buffer`.
* Group `line-number` funcs under SPC t n
* Better name: absolute-line-numbers
Keep the old symbols around for backwards compatibility
Co-authored-by: Rostislav Svoboda <Rostislav.Svoboda@gmail.com>
problem:
The following error messages are shown.
When trying to move, select or swap the current buffer,
to a window nr greater than the total number of open windows.
For example:
With only one window open.
`SPC b 2`
>ad-Advice-select-window: Wrong type argument: window-live-p, nil
In the Buffer Transient State (`SPC b .`):
- `C-2` (`spacemacs/buffer-transient-state/winum-select-window-2`)
>Wrong type argument: window-valid-p, #<window 12>
- `2` (`spacemacs/buffer-transient-state/move-buffer-window-no-follow-2`)
>Wrong type argument: window-live-p, #<window 14>
- `M-2` (`spacemacs/buffer-transient-state/swap-buffer-window-no-follow-2`)
>Wrong type argument: stringp, nil
Solution:
Show a descriptive message, if the target window nr is greater than the number
of open windows. And ignore the LV buffer (hydra).
* [core] Fix evil keybindings when a link is selected in Custom-mode
This uses a separate keymap bound directly to the widget and circumvents the
existing evil keybindings.
This fixes the bug found by @duianto, which he posted
[here](https://github.com/syl20bnr/spacemacs/pull/13949#issuecomment-694685304).
* [core] Fix q and u to work everywhere in a Custom-mode buffer
When Spacemacs' fancy logic works well, it is breathtaking. Sometimes, however,
you may need a way to reach in for something a little more raw: in this case,
going straight to `next-error` rather than `spacemacs/next-error`.
I chose `cn`/`cN` because:
* They seem to be unused thus far
* It makes sense to put these keybinding under compile, since they are
associated with Emac's base functionality for compilation.
* The analogous Ex commands are `:cn` and `:cN`. They work this way even in
Spacemacs (but I am trying to wean myself off Ex mode, since I see the
Spacemacs keybindings as far superior most scenarios).
* `cp` was already taken, so `cN` had to be used for going back.
Fixes#13815.
After the latest change the list of bindings
has been changed to a dynamic form which
is not only slow but very hard to maintain.
I have replaced the list with the original one
and replaced the fixed line with backquote notation
to keep it static.
* Issue
* It could not correctly bind a prefix.
* where `dotspacemacs-emacs-command-key` is modified,
* it continuously binds a `M-x` prefix to `SPC`
* `SPC` always looks as `M-x`
* Solution
* `SPC`, hard coded `string`, was modified to `dotspacemacs-emacs-command-key`
* Expectation
* When a `SPC` prefix is bound, it should be displayed as the registered name.
Some modes have compilation-mode as parent mode but the ansi coloring
scheme is breaking their highlighting.
i.e. https://github.com/Wilfred/ag.el/issues/124
Fix this by applying ansi-colors only when the major mode is
compilation-mode.
Signed-off-by: Loys Ollivier <loys.ollivier@gmail.com>
refactor key bindings for applications to provide additional room for
applications and use lower case characters.
Move calc-dispatch to `SPC a *`
Relates to #13503
User purposes are exclusively for user configs.
Layers shall set purpose extensions instead to allow
reconfiguration.
The existing layers have been refactored to use
extensions now. So this kind of hack is not longer
needed.
spacemacs//fixup-window-configs is added as an `:around` advice for
`rename-buffer`. It should preserve `rename-buffer`'s return value,
which is the new name of the buffer.
Helm v3.3 no longer uses ido to get buffer list. So the change perp-mode makes
to ido won't affect helm anymore. Hence helm buffer list commands such as
helm-mini and helm-buffer-list will shows all buffers regardless of current
layout. Also `SPC l l` crashes with new helm.
This PR fixes them. We use the new helm variable helm-buffer-list-reorder-fn
to filter buffers. Because we compose this value users are still able to
customize this variable.
- added the same bindings you normally have under `SPC m d` under `SPC d`
similar to what Debug layer does. Most of the dap-bindings are not content
sensitive(e. g. rerun last debug session) and it doesn't make sense to restrict
them only to particular major modes.
- Moved `spacemacs/browse-docs-online-at-point` from `SPC d b` to `SPC h b d` to
avoid collisions.
- reuse the botom window for all windows that are in compilation mode and in
dap-server-log-mode. Without this change you will get two windows on top of each
other when you do `SPC c c` and then `SPC m d d d`
Add layer variable documentation for persp-autokill-buffer-on-remove
Set to kill-weak, then buffers are deleted when the layout is deleted.
https://github.com/Bad-ptr/persp-mode.el#suggested-configuration
Add usage section
- describe the core usage of layouts
Add keybindings section
- include all keybindings for the layer
Fix formatting
- = instead of ~ and vice versa
Resolve#11698
Add keybindings for the built in Emacs application called Easy PG, that provides
tools to encrypt/decrypt/sign/verify files and regions using PGP encryption.
Keybindings are defined using spacebind.
Resolve#13319
This is a squash commit including below commits
Add dotspacemacs--pretty-ignore-subdirs
Within the specified subdirs of `dotspacemacs-start-dir`,
spacemacs/prettify-org-buffer (and hence space-doc-mode) will not be called.
Without this variable, using spacemacs/open-junk-file to create an Org file will
result in prettification, which is not necessarily the desired behavior.
Call make-directory in spacemacs/open-junk-file
This imitates the behavior of open-junk-file.
Prevent spacemacs/open-junk-file from getting confused by Dired
If we're in a dired buffer, counsel-find-file will ignore
current-directory (i.e. junk-dir) and use (dired-current-directory) instead. We
fool Counsel by shadowing major-mode to nil.
Update CHANGELOG.develop re spacemacs/open-junk-file
Ivy-hydra is autoloaded so the require statement here is unnecessary. Because this require (commented out) statement was here before I uncommented it in the last PR (#13377), I leave it here (commented out) as it was before that PR.
Theme transient state key-binding `t` is broken if `ivy` completion framework is
used. The binding unconditionally invokes `helm-themes`.
This change adds a new function which takes care of invoking correct
theme-loader function based on completion framework currently in use.
The old binding used `helm-themes` but the new function uses already defined
`spacemacs/helm-themes` which removes the number of candidates limit.
There have been complains about issues with `clean-aindent-mode` from
multiple users. For some of these deactivating the mode in their user-init
did not work as intended. Therefore I have added a setting for it in the
dotfile.
Before this, `evil-ex-search-direction` would be left set to 'backward after:
- entering symbol highlight transient state mode (SPC s h)
- exiting the transient state
That means that pressing 'n' would go to the previous result instead of the next one.
even though we have a check if doom is actually set in
dotspacemacs-mode-line-theme in doom mode line init function. doom-modeline
still adds a bunch functions to hook `after-change-functions regardless of the
value of mode line theme name. Hence we need to put a toggle on the declaration
The cl package has been deprecated.
It had aliases for cl- prefixed commands without the cl- prefix.
Ex: letf or letf* instead of cl-letf or cl-letf*
On the `spacemacs-base` distribution, with the `ivy` layer.
When one tries to search with `SPC /`
(which calls `spacemacs/counsel-search`)
Then this error message is shown:
>spacemacs/counsel-search: Symbol’s function definition is void: letf*
It doesn't happen with the `helm` layer,
because it's search commands already has the `cl-` prefix.
There are also three instances of: `letf`
in the `spacemacs-editing-visual` layers functions:
- `spacemacs/toggle-centered-buffer` (`SPC w c c`)
- `spacemacs/toggle-distraction-free` (`SPC w c C`)
- `spacemacs/centered-buffer-transient-state` (`SPC w c .`)
Without the `cl-` prefix they show the error message:
>Symbol’s function definition is void: letf
Bind `SPC x d l` to `delete-blank-lines` (default: `C-x C-o`)
If the cursor is on a blank line:
- with blank lines above or below, then they are reduced to only one.
- without blank lines above or below, then the blank line is removed.
Add key bindings to the `SPC p l` persp switch project prompt:
- helm `C-d`
- ivy `d` in the `M-o` actions list
They create a new perspective with the project name
and open a dired buffer at the project root.
The suggestion to also add it to ivy was provided by nixmaniack.
`display-fill-column-indicator-mode` is a new native fill column indicator
mode implemented on C-level, thus has almost no performance penalty in contrast
with the legacy `fci-mode` implemented in elisp.
This commit implements conditional activation of the mentioned mode on
Emacs 27+. `fci-mode` is still available for previous Emacs versions.
Resolves#12884
doom-modeline-init was marked as obsolete in version: 1.6.0.
Add new mode: doom-modeline-mode.
868f1bb00b
The doom-modeline package is currently at version: 2.6.2.
Removed the parentheses around the buffer name number,
because the angle brackets are enough.
Added the frame argument.
Rewrote the accepted SPLIT arguments as a table.
The newly introduced function to compile an elpa package
was very much redundant with the existing recompile-elpa function.
I have adapted recompile-elpa so that it can be used for the helm action too.
In addition I have bound recompile-elpa to `SPC c C-c` to allow users to
easily recompile their entire elpa directory if the need arises.
I have also removed the error handling in the helm action in favor of
standard error reporting via the *Compile-Log* buffer.
- Removed the word `Manipulation` from the transient state titles:
- Buffer Manipulation Transient State and Window Manipulation TS
- Expanded the TS abbreviation to Transient State
- Documented the Buffer Transient State key binding:
`q` to quit the transient state
- Capitalized `Transient State` in the titles
- Window Transient State:
- Added a line break after the title in the folded hint.
This allows for more keys to be visible horizontally.
- Moved up the [?] help key after the title, so that
it's in the same place in both the folded and full
transient state.
The search next/previous commands are different
because of the `evil-search-module' values:
vim = evil-search
hybrid = isearch
- With the =vim= editing style in =normal= state:
- ~n~ =evil-ex-search-next=
- ~N~ =evil-ex-search-previous=
- With the =hybrid= editing style in =normal= state:
- ~n~ =evil-search-next=
- ~N~ =evil-search-previous=
