0ffdb353f9 changed the default config template to use a point size instead of a pixel size. Change the defvar declaration as well.
Commit modified by duianto:
Updated font size in doc/documentation.org
problem:
Canceling "spacemacs/ace-buffer-links" with "C-g" showed the error message:
"goto-char: Wrong type argument: number-or-marker-p, t"
solution:
Only go to and press the link if it's a position (number).
Thanks sdwolfz for the suggestion to add underscore to the transient states,
then the shift key doesn't have to be released if it was held down to press `+`.
Added key bindings:
Evil numbers:
`SPC n _` decrease number under point
in the transient state:
`j` decrease number under point
`k` increase number under point
`SPC T T _` decrease transparency
`SPC z x _` scale down font
`SPC z f _` zoom out frame
Update documentation:
Zoom frame:
`q` quit transient state
Evil numbers:
`SPC n =` increase number under point
`SPC n _` decrease number under point
`0..9` add a number prefix argument
`q` quit transient state
Fixed a typo and made a small rewrite of the tip about using a prefix argument.
Added keys to transient states:
Font scaling:
Added `_` scale down
Reordered `k` assignment to match the order in the transient state
Frame transparency:
Added `_` decrease
Reordered `k` assignment to match the order in the transient state
Evil numbers:
Added `k` increase
Added `_` and `j` decrease
Zoom frame:
Added `_` zoom frame out
Reordered `k` assignment to match the order in the transient state
Which-key entries for Evil numbers `SPC n`:
Group together keys that call the same command:
From: + and =
To: +,=
From: - and _
To: -,_
13 and 10.0 are visually the same, because:
- Integer specifies the pixel size.
- Floating-point specifies the point size.
Using a default floating-point size has two benefits:
- It's clear that the font size can be changed by floating-point values.
- There won't be an unpleasant surprise that `13` and `13.0` are different
sizes. For example to make the font slightly larger or smaller than `13`.
Then `10.0` has to be found first by trial and error.
Update the existing `SPC m g g` keybinding to use the command
`spacemacs/clj-find-var`. This makes finding a function definition a much
better experience as you dont have to have the REPL running to find a
definition, but when it is you can use a CIDER specific function.
`spacemacs/clj-find-var` is a wrapper that calls `cider-find-var` if the REPL is
running, otherwise it uses `dump-jump-go`.
Wrapper added in #9792
Latest CIDER release uses the following commands for starting the REPL from
within Emacs
`cider-jack-in-clj` to start a Clojure REPL
`cider-jack-in-clj&cljs` to start a Clojure and ClojureScript REPL
`cider-jack-in-cljs` to start a ClojureScript repl
The older aliases are deprecated and are being removed in the latest beta
release of CIDER
`cider-jack-in`
`cider-jack-in-clojurescript`
Keybindings for these jack-in commands have been updated and as there are three
options they have been moved under the repl > jack-in
The top level of the Clojure mode menu has the existing keybindings updated to
use the new commands. A third top-level keybinding `&` has been added for
`cider-jack-in-clj&cljs`
Although the Clojure repl utils (clojure.repl) are including in the user
namespace in Clojure projects, they are not available in your application
namespace.
The existing CIDER function cider-repl-require-repl-utils adds the Clojure
repl utils into the current namespace, so you can use functions such as doc
and source.
This is often a source of confusion for those new to Clojure / CIDER.
Although the Clojure repl utils (clojure.repl) are including in the user
namespace in Clojure projects, they are not available in your application
namespace.
The existing CIDER function cider-repl-require-repl-utils adds the Clojure
repl utils into the current namespace, so you can use functions such as doc
and source.
This is often a source of confusion for those new to Clojure / CIDER.
add an internal variable for `lsp` layer `lsp-layer--active-mode-list`
to keep track of active major modes using lsp,
`spacemacs//lsp-declare-prefixes-for-mode` will check this variable
to decide whether to add prefix to which-key or not
`SPC h T e` for `emacs-tutorial` (aliased from `help-with-tutorial` for a more
descriptive name)
`SPC h T v` for `evil-tutor-start`
Added a wikipedia link to the `vi` article, where the origins of modal editing
is discussed.
In the upstream dash-docs and helm-dash documentation, they suggest a workflow
where users leave relatively little in `dash-common-docsets`, and instead add
per-mode hooks to enable specific docsets, since a user is unlikely to want
Python documentation while in a C++ buffer and vice versa. Currently, the
spacemacs dash layer will automatically discover all installed docsets and add
them to `dash-common-docsets`.
This commit adds a config option `dash-autoload-common-docsets` that can be set
to nil to skip the auto-loading and allow users to opt-in.
Co-Authored-By: duianto <otnaiud@gmail.com>
* core/core-funcs.el (spacemacs/alternate-buffer): Instead of using
switch-to-buffer, use set-window-buffer-start-and-point, specifying the
previous window start position and point if known. Replace use of
cl-find-if with cl-find.
* CHANGELOG.develop: Add entry for change to spacemacs/alternate-buffer.
Remove mention of powerline-scale property from the
.spacemacs.template font variable comment.
Update the changelog.develop entry for the mode line
separator scale when the utf-8 separator is used.
Emacs 26 added built-in support for line numbers, relative line numbers, and
visual line numbers. Spacemacs supports only absolute and relative, but there is
no way to access the visual mode. It's hard to get around this, since Spacemacs
abstracts line numbers to a reasonably high degree.
Arguably, `visual` is much more useful than `relative` as a display type. Visual
line numbers are like relative line numbers, but only lines that are actually
showing are counted. This means:
1. Hidden lines are not counted. If a large amount of text is folded, the line
numbers won't jump from "10" to "546". This is particularly useful in
buffers like `magit-status`, where a large amount of information is folded
by default.
2. Lines that are wrapped are counted as multiple lines, since they're being
displayed as multiple lines in the editor. Each visual line will be
numbered - unlike `relative`, where the entire thing is numbered... Once.
With standard relative line numbers, you can't actually navigate using the line
numbers in the sidebar as soon as folded or wrapped lines are introduced. Since
this is one of the main use cases for relative line numbers, this is a big
problem.
Visual mode fixes that problem. Every line that's being displayed is labelled.
Numbers always correspond to the actual number of lines you'd need to navigate
to reach that line.
This commit extends Spacemacs' line number interface to provide visual line
number support.
* It's now agda2-auto-maybe-all. If you are not currently in a hole
it tries to `auto` all holes by default.
* Find and set an agda-version variable, to keep compatibility with
previous agda versions.
Revealed already bound navigation keys:
- `g` go to first candidate
- `G` go to last candidate
Moved `[q] quit` from bottom left to bottom right, to match other TSs.
Reduced spacing between keys and descriptions from two to one space.
This moves the point and content of the window close to where you were
before you ran perltidy. Of course if perltidy adds or removes a
significant amount of characters / lines as part of tidying, the point
will be moved by that amount. However in practice this I've found this
to be close enough.
Fixed the minibuffer showing: `nil`
when `select-enable-clipboard` is `nil` and the current files
path/dir/file/line/column/etc. is copied with the keys under
the prefix: `SPC f y`
New var: dotspacemacs-new-empty-buffer-major-mode
Set to a symbol naming a mode (e.g. 'text-mode) to apply that major mode to any
buffers newly created in Spacemacs by spacemacs/new-empty-buffer.
Fixes#12382.
* jsdeliver url format changed from `<project>/<version>/file` to `npm/<project>@<version>/<file>` sometime in 2017.
The old urls still work, but they aren't getting updated.
* The current reveal.js version is 3.8.0
current CDN version: https://cdn.jsdelivr.net/npm/reveal.js@3.8.0
Interrupt longer running evaluations without having to kill or reset the REPL
connection.
Placed in the evaluate section, as it is specific to the currently running
evaluation.
Added new key bindings:
- In the Buffer column:
Added "g" and "G":
[</g] beg
[>/G] end
- In a new Other column:
[q] quit
Reordered the columns:
From: Large to small: buffer, full page, half page, line/column
To: Small to large: line/column, half page, full page, buffer
Reason: The most used (first listed) bindings are probably not scroll to the
"beginning" or "end" of the buffer.
Rearranged the half page columns two instances of "down/up" to one "down" and
one "up".
Reduced the TS width:
- Separated the line/column and full page keys to one "down" and one "up", and
the buffer keys to one "beginning" and one "end".
- Renamed "beginning" to "beg".
Reordered the key bindings (TS) logically: "up" above "down".
Reordered the key bindings (code):
Arranged them in the same order as the columns in the TS.
Add a keybinding to provide a simple way to correct the spelling of a word at
the current point. This enables fixing the spelling mistake as it happens with
low ceremony.
This change fixes a syntax mistake in the use-package declaration of
ruby-test-mode that causes the package to be loaded immediately, instead of
deferring the load until the first ruby file is visited, as is intended.
Make fcitx.el work by default, it was not configured properly.
Added a layer variable to decide if dbus should be used or not:
chinese-fcitx-use-dbus
(default: nil)
Corrected README.org:
It's the dbus interface (not fcitx-remote) that is needed for linux.
Add relevant keybindings and documentation, including a setting
`js2-include-node-externs` as a configuration variable for those that intend to
use `Spacemacs` for node projects, as it currently seems to be mostly aimed at
pure JS (https://github.com/syl20bnr/spacemacs/issues/483).
When trying to complete a path at the `:e ` evil-ex-completion prompt by
pressing `TAB`.
Before: The default Emacs `*Completions*` buffer opens.
After: The `HELM Completion At Point` buffer opens.
And sorted the transient hooks alphabetically.
<<26/04/2019>>
Incorporated feedback from robbyoconnor and yyoncho.
Rebased.
<<08/04/2019>>
Rebased on develop tip
<<17/04/2019>>
Rebased
<<02/06/2019>>
Rebased. Incorporated feedback from duianto.
The key binding was changed in this commit:
javascript: change key binding for repl live eval toggle
8bc9060af8
This updates the documentation.
From: SPC m s a
To: SPC m T l
The call to `format-spec` at the end of `spacemacs/title-prepare` creates
a temporary buffer which invokes `buffer-list-update-hook`. This in turn is
caught by treemacs' follow-mode and can lead to an action that requires a
recalculation of the frame-title, which again creates a new temp-buffer, and
so on.
The result is that in some situations Emacs will put full load on a CPU
core while it is idle (though the UI does remain responsive). The disabling
of the hook for the calculation of the frame title prevents this feedback
loop from forming.
See also https://debbugs.gnu.org/db/34/34765.htmlFixes#12387
When counsel-dash is installed, but helm-dash isn't, startup error
(void-function dash-docs-installed-docsets) will be triggered.
Since common functionality of both counsel-dash and helm-dash was refactored
into dash-docs, a standalone package, the layer code was updated to use the
variables and functions from that package. This also fixed the mentioned error.
Problem:
`C-x w 0` calls `winum-select-window-0-or-10` which shows:
winum-select-window-by-number: No window numbered 10
Solution (Thanks Miciah):
Remap `winum-select-window-0-or-10` to the current filetree command:
`neotree-show` or `treemacs-select-window`
Then all three key bindings:
`C-x w 0`, `SPC 0` and `M-0` will call the same filetree command.
Additionally:
Renamed the remapped which-key name to the filetree command.
Wrapped lines to keep them under 80 chars.
This change will make buffers with the motion state
(e.g., spacemacs home buffer) be able to use the
evil-unimpaired navigation key bindings.
Note that the normal state will inherit the motion
state map anyway, so there's no need to set the
normal state map separately.
It is nicer when user can stay in the "home row" for basic operations like
zooming in and out
Font Scaling Transient State
`k` scale up
`j` scale down
Frame Transparency Transient State
`k` increase transparency
`j` decrease transparency
Zoom Frame Transient State
`k` zoom frame in
`j` zoom frame out
Added two additional Zoom Frame TS keys:
`m` max frame
`f` fullscreen
When writing documents in latex or any markup language there is soon or later
going to be unrecognized words that get falsely flagged as incorrect. These
functions and key-bindings allows the user to add unrecognized words to the
dictionary so they are recognized as correctly spelled words by ispell/flyspell.
This seem's like a must have feature for any application that does any kind of
spell checking.
Added key bindings:
SPC S a b for Add word to dict (buffer)
SPC S a g for Add word to dict (global)
SPC S a s for Add word to dict (session)
Spell Checking Transient State:
SPC S . B for Add word to dict (buffer)
SPC S . G for Add word to dict (global)
SPC S . S for Add word to dict (session)
Delete the hook that commit 9fcf8c898d added
to persp-created-functions, and change spacemacs/ivy-spacemacs-layouts,
spacemacs/helm-perspectives, spacemacs/helm-persp-switch-project, and
spacemacs/ivy-persp-switch-project to achieve the intended goal of adding
the desired buffers after creating a new perspective.
Change spacemacs/helm-persp-switch-project and
spacemacs/ivy-persp-switch-project as follows: If the user selects a
project but then quits without selecting a file or buffer, the new
perspective is now immediately killed. Otherwise, if the perspective did
not already exist, any buffers that belong to the selected project are
added to the perspective.
Add the following actions to spacemacs/ivy-spacemacs-layouts and
spacemacs/helm-perspectives:
* Create a new perspective with the Spacemacs home buffer (default action).
* Create a new perspective with the buffers that belong to the current
buffer's project.
* Create a new perspective with the buffers that belong to the current
perspective (i.e., make a copy of the current perspective).
This commit resolves the problem reported in
9fcf8c898d (commitcomment-33343455).
This commit also fixes a problem with the default action for
spacemacs/ivy-spacemacs-layouts and spacemacs/helm-perspectives. According to
commit 7b931a9f5b, the default action is supposed
to display the home buffer if the action creates a new perspective, which was
determined by checking whether the perspective was missing from the list of
perspectives _before_ switching. However, commit
eb7ca651fe changed this logic so it was checking
whether the perspective was missing from the list of perspectives _after_
switching. This commit restores the correct logic.
* CHANGELOG.develop: Update.
* layers/+completion/ivy/funcs.el (spacemacs/ivy-spacemacs-layouts): Add
"Copy Current Layout" and "Create Project Layout" actions to the docstring.
Use spacemacs//create-persp-with-home-buffer for the default action.
* layers/+completion/ivy/packages.el (ivy/post-init-persp-mode): Add
actions for spacemacs//create-persp-with-current-project-buffers and
persp-copy.
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs||switch-layout): New macro. Switch to the named perspective,
and initialize it using the provided forms if the perspective is new.
(spacemacs//create-persp-with-current-project-buffers): New function.
Create a new perspective with the current project's buffers.
(spacemacs||switch-project-persp): New macro. Switch to the named
perspective, and evaluate the provided forms with
projectile-after-switch-project-hook bound with a hook that adds the
current project's buffers to the perspective. If the user quits during the
evaluation of the forms, kill the perspective.
(spacemacs//create-persp-with-home-buffer): New function. Switch to the
named perspective, and go to the Spacemacs home buffer if the perspective
is new.
(spacemacs/helm-perspectives): Use spacemacs//create-persp-with-home-buffer
for the default action. Add actions for
spacemacs//create-persp-with-current-project-buffers and persp-copy.
(spacemacs//helm-persp-switch-project-action): New function. Switch to the
named perspective and call projectile-switch-project-by-name, using the new
spacemacs||switch-project-persp macro. Bind helm-quit-hook with a hook
that kills the new perspective if the user quits
projectile-switch-project-by-name.
(spacemacs/helm-persp-switch-project): Use
spacemacs//helm-persp-switch-project-action.
(spacemacs//ivy-persp-switch-project-action): New function. Switch to the
named perspective and call counsel-projectile-switch-project-action with a
hook to add the project's buffers to the new perspective.
(spacemacs/ivy-persp-switch-project): Delete advice for
counsel-projectile-switch-project-action. Use
spacemacs//ivy-persp-switch-project-action instead.
(spacemacs//add-project-buffers-to-persp): Deleted.
* layers/+spacemacs/spacemacs-layouts/packages.el
(spacemacs-layouts/init-persp-mode): Don't add a hook to
persp-created-functions.
Dune is a popular build-tool for OCaml projects, the `dune` package adds:
- Adds syntax highlighting
- Template insertion
- Some testing/compilation functions
global-hl-todo-mode uses function to activate only for modes that are in the
activate list but are not org-mode.
Reference: 24b9925b1b/hl-todo.el (L185-L188)
Adds a comment re `hl-todo-activate-in-modes` var
These changes adjust the `hy-mode` key-map and make use of `use-package`'s
`:mode` and `:interpreter` settings.
Regarding key-maps, the REPL prefix `s` has been added alongside `e`, since `s`
seems at least as conventional among layers as `e`. Although `e` is used for
Elisp and Clojure, it isn't used for Python or Racket. Scheme appears to use
both, so there's some precedence for the approach used here.
helm-swoop cannot detect the buffer has changed when calling git checkout to
change the file content, so helm-swoop won't clear the cache, we have to clear
the cache manually by evaluating `helm-swoop--clear-cache`. As it is
inconvenient, so I introduce a new key binding to to this.
Signed-off-by: Yang Qian <yang.qian@citrix.com>
Recent versions of `dumb-jump` have support for jumping to definitions for generic SQL buffers, and
support in Spacemacs requires that we enable these in the `sql` layer.
Defines a transient state for symbol-overlay, and bind it to ~SPC s o~ and ~SPC s O~.
Updates:
* update due to the signature change of `symbol-overlay-get-list`.
* align the docstring using `^^` and add `quit` button.
Using the `spell-checking` layer mini-mode `Space S .` would cause an error
```
Wrong type argument: commandp -- flyspell-correct-previous-word-generic
```
According to the [README](https://github.com/d12frosted/flyspell-correct#deprecations-in-v05), it has since moved the command to a new name, which is not available anymore.
This commit changes the command used to point to the new name to make the transient mode work again.
Move (thanks to... statements that are split, to the next line.
Changed `C` to `c` for the workspaces TS entry, since lower case will be used
most often, upper case just keeps the TS open.
Added key binding descriptions to finance layer.
Fix latex layer typo.
Commit 1c4f685b13 replaced
configuration-layer--layers (a list of cfgl-layer objects) with
configuration-layer--used-layers (a list of symbols). It also changed the
configuration-layer/insert-lazy-install-configuration function to use the
new variable, but it did not change the sort predicate. Consequently, the
function started failing:
Wrong type argument: listp, spacemacs-purpose
In addition, because sort is destructive, the function also deleted values
from configuration-layer--used-layers.
This commit fixes the sort predicate so that the function returns the
correct value, and it copies the list before sorting to avoid modifying
configuration-layer--used-layers.
* core/core-configuration-layer.el
(configuration-layer/insert-lazy-install-configuration): Use string<
as the sort predicate, and give sort a copy of the list.
Fix issue #11282.
When a new perspective (layout) is created and we are in a Projectile
project, add all buffers belonging to that project to the perspective.
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs//add-project-buffers-to-persp): Add new function.
* layers/+spacemacs/spacemacs-layouts/packages.el
(spacemacs-layouts/init-persp-mode): Add
spacemacs//add-project-buffers-to-persp to persp-created-functions.
This reverts commit 3a23e0cc6b.
This change completely break `SPC f F` in two ways:
1) it breaks the convention followed at various places to have capital letter
bindings to prefill the helm prompt
2) it breaks the main functionality of the bindings which is very important:
press `SPC f F` on a path will brings you directly to the directory of this
file. It allows to quickly nagivate to files references in files.
Commit gabesoft/evil-mc@041b904475 changed
the default key bind of `g r u` to a different (new) function. The old
behaviour is now available at `g r q`.
I realize this may be controversial, but as I understand it (correct me if I'm
wrong), all `SPC f F` does differently compared to `SPC f f` is call the vanilla
version of `helm-find-files` that does take `thing-at-point` into account. But I
presume we removed this feature in `spacemacs/helm-find-files` for a reason.
Also, it makes sense as a *forte* version of `helm-find-files` when you can't
find something in your current directory and decide to drill deeper. This
complies with the general tone of uppercase/lowercase bindings in Spacemacs, and
provides more utility than te subtle distinction between different
implementations of `helm-find-files`.
Adds `SPC m e u` to the Clojure layer to call `cider-undef`, removing an
existing definition from the current namespace.
This provides a Spacemacs style keybinding for the existing Emacs style
keybinding `C-c C-u`
I often use these operations to ask how mine and other have diverged:
=< smerge-diff-base-mine
== smerge-diff-mine-other
=> smerge-diff-base-other
It's awkward to use their global keybindings under C-c ^ because that exits the
smerge transient-state.
Judging from issue GH-7378 there was no principled reason to omit them, only
that the author did not use them himself.
- dap-debug-edit-template is very important for some of the debug adapters so it
is important to have a keybinding for it to improve the discoverability
- in addition to that I have removed the line that removes clangd from the
server list since it is not needed in latest lsp-mode since it has smaller
priority than ccls/cquery.
Naming the main file `main.nim` is a `C` convention, not a `Nim` convention. In
fact, `Nimble` defaults to naming the main file after the project at
initialization. I will soon add a function that parses the Nimble configuration
for project entry point and compiles that. Until then, this is a solid
compromise between flexibility and reliability. I also added a doc-string to the
function.
