New function `dotspacmacs/emacs-custom-settings` wrapping Emacs
custom settings sexps.
`dotspacemacs/emacs-custom-settings` is called just after the user
configuration (`dotspacemacs/user-config`)
Customize cannot write its auto-generated sexps inside a function, to
accomplish this we trick Emacs by setting the custom file to a file
in `.cache` directory, the path to this file is defined by the variable
`spacemacs--custom-file`. At the startup of Emacs we read this file
to insert its content inside the function
`dotspacemacs/emacs-custom-settings` in the dotfile, this is done in the
function `spacemacs/write-custom-settings-to-dotfile`.
I don't think we need to write the custom settings to the dotfile when
exiting Emacs as well, since we do it at startup at the very beginning
(i.e. before actually loading the dotfile) we should be OK.
Fixes#5170
When upgrading packages, Spacemacs backs up the old versions of the
packages and then tells the user to restart Emacs using `SPC q r` so
that the new version will be auto-installed. But `SPC q r` doesn't
work if restart-emacs is one of the packages which is being upgraded,
and hence isn't currently installed.
enumeration lists of the form:
- lorem ipsum
* lorem ipsum
+ lorem ipsum
1. lorem ipsum
2) lorem ipsum
will be treated as separate paragraphes and not be squished by
fill-region anymore.
More flexible framed text generation:
- adjust frame width to content width
- define minimum and maximum width
- allow for inserting a caption at the bottom of the frame
Unless dotspacemacs-startup-buffer-respinsive is nil:
- framed notes are centered
- max width is adapted to the window width
Also add a note inviting the user to update his packages and dotfile on
every new release (fixes#7357).
With a nil value for dotspacemacs-switch-to-buffer-prefers-purpose,
switch-to-buffer prefers using the current window, same as vanilla
Emacs. With a non-nil value, switch-to-buffer prefers another window
with the same purpose as the buffer. This affects actions like
spacemacs/alternate-buffer, and opening buffers from Dired.
Cleaned up a warning that occurs when loading private layers
The layer discovery loop scans the private layer directory (
~/.spacemacs.d/layers) AND also ~/.spacemacs.d
The code then checks if a layer directory already exists
but the comparison fails due to trailing / in some paths.
The fix is to strip any trailing slash from both directories being
compared.
- Apply `/` and `//` rules (double / is for private functions)
- Add missing `spacemacs/` prefixes
- Move functions used outside of spacemacs-base layer to
core/core-funcs.el
- Remove unused functions
Commit originally intented to only rename linum-update-window-scale-fix
to spacemacs/linum-update-window-scale-fix :-)
Currently j/k were only navigating between lines, but hitting RET
wouldn't work on a recent file and the like, when the cursor wasn't
directly over the filename. Changing j/k to widget navigation, ensures
that the cursor is always on something clickable. This change should
make the home buffer feel more at home for evil mode users.
Fixes some edge cases like SPC f e R performed after SPC h SPC which
could wrongly install or uninstall packages.
Side effects is contained using the variable
configuration-layer--package-properties-read-onlyp, if non nil then
properties value of a package cannot be overwritten.
Calling multiple times configuration-layer/make-package appends the
same layers to :owners, :pre-layers and :post-layers slot.
Use object-add-to-list instead of push.
Add some tests and mock some warning messages.
Rename configuration-layers/make-packages to
configuration-layers/make-packages-from-layers
Move all package initialization logic to configuration-layers/make-package
instead of having it split between make-packages and make-package.
Hook semantic is to be used with run-hooks API and run all hooks
sequentially, jump list semantic is different since the running
functions are not guaranteed to be executed so we prefer using regular
list API to manage jump-lists.
Previous change in 5d6e9ab789 dropped the
"/" marker to match at beginning of string. Since directory-files
matches a regex, use "\\`" to indicate match at beginning of string.
This commit defines:
- spacemacs-default-jump-handlers: a list of functions that can jump to
definition in ALL modes.
- spacemacs-jump-handlers-MODE: a list of functions that can jump to
definition in MODE.
- spacemacs-jump-handlers: a buffer-local list of functions that can
jump to definition. This is made up of the values of the two previous
variables whenever a given major mode is activated.
- spacemacs/jump-to-definition: a function that tries each function in
spacemacs-jump-handlers in order, and stops when one of them takes us
somewhere new.
- spacemacs|define-jump-handlers: a macro that
* defines spacemacs-jump-handlers-MODE, possibly filled with initial
functions
* defines a function that is added to the hook of the given MODE
* binds “SPC m g g” of that MODE to spacemacs/jump-to-definition
This is an attempt to harmonize all the different approaches to jumping.
Specifically,
- Existing intelligent jump packages that work for only a single mode
should go to the beginning of spacemacs-jump-handlers-MODE. E.g.
anaconda for python, ensime for scala, etc.
- Packages like gtags that work for several modes (but potentially not
all) and which is dumber than the intelligent jumpers should go the
the END of spacemacs-jump-handlers-MODE.
- Packages like dumb-jump that work for all modes should go to
spacemacs-default-jump-handlers.
In all cases the order of the jump handlers in each list should be from
most to least intelligent.
Fixes#6619
Rename dotspacemacs-download-packages to dotspacemacs-install-packages
to better reflect the changes in the previous commit.
Also change the value 'used to 'used-only (note that 'used is still
supported for backward compatibility).
See end of this message for important breaking changes.
Previous behavior was to configure any installed package which caused
a lot of bad side effects and could make spacemacs unusable. This
behavior made little sense and does not fit with spacemacs.
This commit fixes this behavior by separating installed packages from
configured packages. In short dostspacemacs-download-packages variable
now only affect package installation. Packages are now configured if and
only if they are effectively *used* (i.e. listed in variable
dotspacemacs-configuration-layers or dotspacemacs-additional-packages).
IMPORTANT CHANGE: functions `configuration-layer/declare-used-layer` and
`configuration-layer/declare-used-layers` have been removed. These
functions have been introduced in develop branch only so the impact
should be minimal.
Saving a pkg-match regex to a temporary variable lets us avoid recomputing it on each
iteration. I didn't benchmark the performance impact, but unless there's a downside to
using `let*` vs `let`, it seems like a no-brainer.
Passing pkg-match to `directory-files` reduces the returned files to those that match the
regex rolling our own reduction.
For emacs 24.5 packages will be installed in .emacs.d/elpa/24.5, for
emacs 24.4 packages will be installed in .emacs.d/elpa/24.4, etc.
For a user that uses several emacs versions with the same config, the
packages for version X will be in .emacs.d/elpa/X and the packages for
version Y will be in .emacs.d/elpa/Y. This is instead of using the same
.emacs.d/elpa and possibly having copmiled elisp packages the are
incompatible with one of the emacs versions in use.
Rollback directories are also separated by version:
.cache/.rollback/24.5, .cache/.rollback/24.4, etc.
Don't fallback to default init file when SPACMACSDIR is used and
$SPACEMACSDIR/init.el doesn't exist. The file will be created during
the startup process.
Misspellings:
"beginnign" changed to "beginning",
"Insert one of several lines" changed to "Insert one or several lines" in two functions,
"identation" changed to "indentation",
Missing comment copied from the function that inserts a line
in the opposite direction:
(defun spacemacs/insert-line-below-no-indent (count)
"Insert a new line below with no indentation."
and renamed the direction, resulting in:
"Insert a new line above with no indentation."
Duplicate comments removed, the comments inside the functions,
are better explanations of what the function does.
Functions reordered:
The functions:
(defun spacemacs/evil-insert-line-below (count)
and
(defun spacemacs/evil-insert-line-above (count)
were written in a illogical order,
the "above" function should be written before the "below" function,
with this change, the function order will match other functions
with "above" and "below" in their names,
for example these:
(defun spacemacs/insert-line-above-no-indent (count)
https://github.com/syl20bnr/spacemacs/blob/develop/layers/%2Bdistributions/spacemacs-base/funcs.el#L535
(defun spacemacs/insert-line-below-no-indent (count)
https://github.com/syl20bnr/spacemacs/blob/develop/layers/%2Bdistributions/spacemacs-base/funcs.el#L549
evil-commands.el
line 2205: (defun evil-open-above (count)
line 2219: (defun evil-open-below (count)
line 2310: (defun evil-copy-from-above (arg)
line 2326: (defun evil-copy-from-below (arg)
evil-common.el
line 1892: (defun evil-insert-newline-above ()
line 1901: (defun evil-insert-newline-below ()
Can force a check with the universal prefix argument, for instance:
SPC u SPC SPC spacemacs/check-for-new-version
will always check for a new version even if not on master branch.
Once per 24 hours by default.
Caveat: if a new version is detected on the current instance of Emacs
and Emacs is restarted before the end of the 24 hours window then
the new version lighter in the modeline disappear; i.e. we don't
remember the last check results.
Fixes#6692