problem:
renaming a file to it's current name, results in the message:
"File 'current-name' successfully renamed to 'current-name'"
solution:
when the new and old names are the same, show a rename failed message, and call
the rename function again
problem:
the rename command shows the same message:
"File 'old-file-name' successfully renamed to 'new-file-name'"
(without the directory path) for all three file operations:
move, rename and both move & rename
solution:
show messages that fit the rename operation,
and align the from and to path/file names,
to make it easier to see what changed.
And use the same message format when renaming a buffer.
Sometimes it is useful to go directly to the last error message in the buffer.
This function recursively calls 'spacemacs/next-error until the last error is
reached.
The binding "SPC e l" is associated with it
It has already been bound to <kbd>C-backspace</kbd> and
<kbd>C-delete</kbd>. Such an
additional binding is redundant (if hjkl navigation is not used) and
makes the original <kbd>C-h</kbd> binding
(help) unavailable.
Removed org verbatim emphasis around link descriptions.
Moved up a paragraph before the julia-mode-enable-lsp code snippet,
because it ended with "then install this layer with:".
Removed the link from the same paragraph, it linked to it's own section.
Loaded lsp-julia from melpa
And fixed#12852
spacemacs/go-setup-backend was incorrectly added to the hook:
julia-mode-local-vars-hook
The correct function is now added: spacemacs/julia-setup-lsp
correct a tick
The variable clojure-enable-linters can now be set to a list of linters:
'(clj-kondo joker)
or
'(joker squiggly)
or any other combination of the available linters.
In which case, all linters in the list will be active if they are
available to be. In that flycheck is configured so that each linter
in the list has as next-checker the next linter in the list.
The variable can also now be set to:
'joker
If only the newly added joker linter should be used.
This will pull down flycheck-joker and add Joker as a checker for
Clojure modes.
--
Implementation Details
The way it works is that for each Clojure linting mode, clj, cljc,
cljs and edn, a primary linter is chosen based on the order the
user specifies in clojure-enable-linters which support that mode.
It is made the primary linter for flycheck to use by being promoted
to the front of the flycheck-checkers list. All other linters specified
by the user which the mode also supports get added to it as a
next-checker.
Tested with clj-kondo, joker and squiggly. The only issue I saw was that
the way flycheck-clojure works, and the way I currently have setup the
logic for multiple checkers mean that we can't add to a mode multiple
checkers for the same linter. flycheck-clojure has eastwood, kibit and
core.typed. If you have it configured to use eastwood linter, then it
will all work, as eastwood gets added as the next-checker. But if you
have it disabled in flycheck-clojure, there won't be any
flycheck-clojure linters to activate. I'm not sure as of now how to best
support that. Ideally, we would not clubber linters into a single packge
like that, and so the layer would have instead of squiggly: eastwood,
kibit, core.typed. But that's not how flycheck-clojure works. Future
commit might be able to do something smarter about this.
The company-quickhelp package wasn't mentioned in the auto-completion readme.
And the variable name auto-completion-enable-help-tooltip that enables the
package doesn't mention the package name either (which is fine).
This just makes it somewhat easier to see/find that the company-quickhelp
package is related to tooltips and that it's part of the auto-completion layer.
Effectively, this forces `vterm` to spawn a shell set in a
`shell-default-term-shell` variable i/o default "/bin/bash" - just like
other shells from `shell-pop` do.
Conda layer needed some additions to be spacemacs
conform. In detail I did:
* Add missing features block and TOC declaration in README
* Change bindings to extent the existing python bindings
rather than adding new general bindings.
* Make conda layer require python layer
add auto-completion-enable-help-tooltip support
add auto-completion-use-company-box option and update document
add company-box config source url, remove empty line and join single line parenthesis
hide company-box mode line
update CHANGELOG.develop
hide doc popup when selection changed
add all-the-icon in auto-completion-packages
move icons config to auto-completion/init-all-the-icons according to duianto's advice
counsel-git find a file in the current git repository. "gff" is
currently bound to magit-find-file. While counsel-git seemingly performs the
same functionality as magit-find-file, they are substantially different:
magit-find-file is not intended to find a file, contrary to what the
name indicates. See https://github.com/magit/magit/issues/3967 for
explanation. This is why we need another key binding for counsel-git.
Delete integration code for git-link and git-timemachine, which is
superseded by upstream changes to git-link committed in August 2016:
433ba1dba7
* CHANGELOG.develop: Add an entry for this change.
* layers/+source-control/git/funcs.el (spacemacs/git-link-copy-url-only):
Replace call to spacemacs/git-link with a call to git-link.
(spacemacs/git-link-commit-copy-url-only): Replace call to
spacemacs/git-link-commit with a call to git-link-commit.
(spacemacs/git-link, spacemacs/git-link-commit): Delete functions.
* layers/+source-control/git/packages.el (git/init-git-link): Replace
binding to spacemacs/git-link with a binding to git-link.
counsel-more-chars was renamed to ivy-more-chars a year ago:
Move counsel-more-chars-alist and counsel-more-chars to ivy.el.
4461ef302a
with an alias to counsel-more-chars.
The alias was removed 2 days ago:
ivy.el: Clean up obsolete aliases
1a9002bf4b
Follow up the changes in the previous commit with some minor improvements
to formatting, grammar, spelling, and wording.
* layers/+distributions/spacemacs-docker/README.org: Replace "+" with
"and".
* layers/+email/mu4e/README.org: Use full sentences in the comments in the
mu4e-alert example.
* layers/+intl/japanese/README.org: Use verbatim markers for names of
files, functions, packages, and variables. Capitalize "Linux".
* layers/+os/osx/README.org: Capitalize "Emacs", "Vim", and "Evil".
* layers/+os/osx/config.el (osx-command-as, osx-use-dictionary-app):
* layers/+os/osx/keybindings.el (spacemacs/system-is-mac): Improve
docstrings.
* layers/+readers/dash/README.org: Capitalize "API", "Helm", and "Ivy".
* layers/+spacemacs/spacemacs-defaults/config.el
(delete-by-moving-to-trash): Use full sentences in comment.
* layers/+spacemacs/spacemacs-defaults/funcs.el
(spacemacs/toggle-frame-fullscreen-non-native): Improve docstrings.
* layers/+tools/shell/packages.el (shell/init-eshell-z): Replace use of
with-eval-after-load by using use-package's :after keyword to load eshell-z
when eshell is loaded.
Use a dynamic hint for the smerge transient state in order to show the
current and total numbers of conflicts, and make the full hint toggleable.
* CHANGELOG.develop: Add an entry for this change.
* layers/+source-control/version-control/config.el
(spacemacs--smerge-ts-full-hint-toggle): New variable.
* layers/+source-control/version-control/funcs.el
(spacemacs//smerge-ts-hint): New function. Return a string indicating the
index of the current conflict and the total number of conflicts detected by
smerge-mode. If spacemacs--smerge-ts-full-hint-toggle is true, append the
smerge transient state's full hint.
(spacemacs//smerge-ts-toggle-hint): Toggle showing the full hint for the
smerge transient state.
* layers/+source-control/version-control/packages.el
(version-control/init-smerge-mode): Define the transient state in :init so
we can use spacemacs|transient-state-format-hint. Use
spacemacs//smerge-ts-hint to display a dynamic hint. Bind the ? key to
spacemacs//smerge-ts-toggle-hint.
Instead of using a single variable for all transient states' full-hint
toggle functions, define a unique variable for each toggle function so that
toggling the full hint for one transient state does not affect the others.
* CHANGELOG.develop: Add an entry for this change.
* layers/+spacemacs/spacemacs-defaults/keybindings.el
(spacemacs--window-manipulation-ts-full-hint-toggle): New variable.
(spacemacs//window-manipulation-ts-toggle-hint)
(spacemacs//window-manipulation-ts-hint): Replace
spacemacs--ts-full-hint-toggle with
spacemacs--window-manipulation-ts-full-hint-toggle.
* layers/+spacemacs/spacemacs-layouts/config.el
(spacemacs--ts-full-hint-toggle): Delete variable.
(spacemacs--layouts-ts-full-hint-toggle)
(spacemacs--workspaces-ts-full-hint-toggle): New variables.
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs//layouts-ts-toggle-hint, spacemacs//layouts-ts-hint): Replace
spacemacs--ts-full-hint-toggle with spacemacs--layouts-ts-full-hint-toggle.
(spacemacs//workspaces-ts-toggle-hint, spacemacs//workspaces-ts-hint):
Replace spacemacs--ts-full-hint-toggle with
spacemacs--workspaces-ts-full-hint-toggle.
Use nil and t instead of 0 and 1 for spacemacs--ts-full-hint values.
* layers/+spacemacs/spacemacs-layouts/config.el
(spacemacs--ts-full-hint-toggle): Define with an initial value of nil.
* layers/+spacemacs/spacemacs-defaults/keybindings.el
(spacemacs//window-manipulation-ts-toggle-hint)
(spacemacs//window-manipulation-ts-hint):
* layers/+spacemacs/spacemacs-layouts/funcs.el
(spacemacs//layouts-ts-toggle-hint, spacemacs//layouts-ts-hint)
(spacemacs//workspaces-ts-toggle-hint, spacemacs//workspaces-ts-hint):
Replace (logxor ... 1) and (equal 1 ...) with (not ...) and a simple truth
check.
The react layer relies on the javascript layer and uses multiple values
from it including definition of a formatter. However, the react layer
does not respect the javascript layer setting for formatting a file on
save.
This patch configures the react layer to add a before save hook that
calls the javascript layer formatting function when the
'javascript-fmt-on-save variable is enabled.
Context:
When using org files, one normally tends to add Github code links to an
algorithm/bug explanation so that readers are able to follow along with a PR
change.
The current `<SPC> g l L` command gets us the URL to the current branch; given
the code is in flux, the link becomes non-sensical rather quickly, loosing value
when trying to build a document with explanations about the code.
This PR allows us to get the Permalink (e.g. link associated to the commit, not
the branch); using this, the URL contents will never change with new commits
submitted to the repository.
Changes:
* Add two new functions with associated keybindings:
- `<SPC> g l p` maps to `spacemacs/git-permalink`
- `<SPC> g l P` maps to `spacemacs/git-permalink-copy-url-only`
* The above changes rely on mechanisms of `git-link`, so no new code needs to
be introduced
There was a edge case with the declaration of the `lsp` layer in `layers.el`
files.
The `hy` layer depends on the `python` layer which in turn depends on the `lsp`
layer if and only if the `python-backend` layer variable is set to `lsp`.
When the `hy` layer was declared first then it declares the `python` layer
without its layer variables, thus the `lsp` layer was not declared because the
`python-backend` variable was not set.
The fix is to gather all the layer dependencies and resolve them only after all
the used layers have been declared.
* new function `configuration-layer/declare-layer-dependencies`
* replace all calls to `configuration-layer/declare-layer` by the new function
except for distribution layers (we declare layer dependencies right away in
distribution layers)
* use local-vars-hook coupled to setup function for dap
* define new private layer variable `spacemacs--dap-supported-modes` to
configure key bindings. This allows to move the key bindings definition from
`funcs.el` to `packages.el`
* remove duplication of DAP key bindings in READMEs by pointing to the dap layer
documentation
* alphabetically sort package configuration
The dart layer requires the official LSP server as the
emacs mode alternative is not longer properly maintained.
Therefore I have added some more description of how to
install the server properly and let the layer load
the LSP layer automatically.
In addition I have removed the unsupported variable
`dart-server-enable-analysis-server` from the
documentation.
See https://github.com/bradyt/dart-mode/wiki/LSP for
details.
While getting the dart-server major mode key bindings to work.
Everything was moved from the `dart/init-dart-mode` function,
to the `dart/init-dart-server` function.
This revealed that an empty `dart/init-dart-mode` section causes
`M-x revert-buffer`
to switch the dart buffer to `fundamental-mode`.
The fix was to load `dart-mode` from the `dart/init-dart-mode`
function. And add `:after dart-mode` to the
`dart/init-dart-server` function.
dart-mode has been split into two packages:
- dart-mode, Provides basic syntax highlighting and indentation.
- dart-server, Factors out the features from dart-mode.el that relied on
external executables, thus improving availability, reliability, testing and
development of dart-mode.el.
When send form/region/buffer to repl without focus - repl buffer is
not scrolling and result not visible.
Added scrolling to the end of the repl-buffer after eval.
Additional path names are now detected.
However, the patterns have also been anchored more tightly, meaning they
are more accurate, so they will match less slop (this may affect certain
edge cases where people unknowingly depended on false-positives, e.g.,
`parasite.yml').
Technical details about regexp changes:
* Remove unnecessary `.*' at beginning
* Anchor file names with leading `/' to prevent partial matches
- (eg., don't match `not-main.yml')
* Restructure capture groups so that `\\.yml' extension is at very end
* Support `.yaml' extensions as well
* Anchor the very end with `$'
On systems where IPython executable path contains whitespace
(e.g, if IPython is under Local Appdata and your Windows username has
whitespace), the shell command was invalid, quoting the executable is required.
"pu" for lsp backends called a lsp-java function which has
been deactivated in the `lsp-java` package. Replaced it with
the closest match from the same package, updating the
project settings instead.
