Nix Release Notes
Release 0.10 (TBA) This version of Nix uses Berkeley DB 4.4 instead of 4.3. The database is upgraded automatically, but you should be careful not to use old versions of Nix that still use Berkeley DB 4.3. In particular, if you use a Nix installed through Nix, you should run $ nix-store --clear-substitutes first. Also, the database schema has changed slighted to fix a performance issue (see below). When you run any Nix 0.10 command for the first time, the database will be upgraded automatically. This is irreversible. An option (or ) has been added to nix-env --query to allow you to compare installed versions of packages to available versions, or vice versa. An easy way to see if you are up to date with what’s in the channel is nix-env -qc. TODO: shared stores. A performance issue has been fixed with the referer table, which stores the inverse of the references table (i.e., it tells you what store paths refer to a given path). Maintaining this table could take a quadratic amount of time, as well as a quadratic amount of Berkeley DB log file space (in particular when running the garbage collector). Nix now catches the TERM and HUP signals in addition to the INT signal. So you can now do a killall nix-store without triggering a database recovery. Reference scanning (which happens after each build) is much faster. TODO: string interpolation TODO: string concatenations involving derivations TODO: function argument default values can refer to other function arguments TODO: proxy support. TODO: nix-pack-closure and nix-unpack-closure.
Release 0.9.2 (September 21, 2005) This bug fix release fixes two problems on Mac OS X: If Nix was linked against statically linked versions of the ATerm or Berkeley DB library, there would be dynamic link errors at runtime. nix-pull and nix-push intermittently failed due to race conditions involving pipes and child processes with error messages such as open2: open(GLOB(0x180b2e4), >&=9) failed: Bad file descriptor at /nix/bin/nix-pull line 77 (issue NIX-14).
Release 0.9.1 (September 20, 2005) This bug fix release addresses a problem with the ATerm library when the flag in configure was not used.
Release 0.9 (September 16, 2005) NOTE: this version of Nix uses Berkeley DB 4.3 instead of 4.2. The database is upgraded automatically, but you should be careful not to use old versions of Nix that still use Berkeley DB 4.2. In particular, if you use a Nix installed through Nix, you should run $ nix-store --clear-substitutes first. Unpacking of patch sequences is much faster now since we no longer do redundant unpacking and repacking of intermediate paths. Nix now uses Berkeley DB 4.3. The derivation primitive is lazier. Attributes of dependent derivations can mutually refer to each other (as long as there are no data dependencies on the outPath and drvPath attributes computed by derivation). For example, the expression derivation attrs now evaluates to (essentially) attrs // { type = "derivation"; outPath = derivation! attrs; drvPath = derivation! attrs; } where derivation! is a primop that does the actual derivation instantiation (i.e., it does what derivation used to do). The advantage is that it allows commands such as nix-env -qa and nix-env -i to be much faster since they no longer need to instantiate all derivations, just the name attribute. Also, it allows derivations to cyclically reference each other, for example, webServer = derivation { ... hostName = "svn.cs.uu.nl"; services = [svnService]; }; svnService = derivation { ... hostName = webServer.hostName; }; Previously, this would yield a black hole (infinite recursion). nix-build now defaults to using ./default.nix if no Nix expression is specified. nix-instantiate, when applied to a Nix expression that evaluates to a function, will call the function automatically if all its arguments have defaults. Nix now uses libtool to build dynamic libraries. This reduces the size of executables. A new list concatenation operator ++. For example, [1 2 3] ++ [4 5 6] evaluates to [1 2 3 4 5 6]. Some currently undocumented primops to support low-level build management using Nix (i.e., using Nix as a Make replacement). See the commit messages for r3578 and r3580. Various bug fixes and performance improvements.
Release 0.8.1 (April 13, 2005) This is a bug fix release. Patch downloading was broken. The garbage collector would not delete paths that had references from invalid (but substitutable) paths.
Release 0.8 (April 11, 2005) NOTE: the hashing scheme in Nix 0.8 changed (as detailed below). As a result, nix-pull manifests and channels built for Nix 0.7 and below will now work anymore. However, the Nix expression language has not changed, so you can still build from source. Also, existing user environments continue to work. Nix 0.8 will automatically upgrade the database schema of previous installations when it is first run. If you get the error message you have an old-style manifest `/nix/var/nix/manifests/[...]'; please delete it you should delete previously downloaded manifests: $ rm /nix/var/nix/manifests/* If nix-channel gives the error message manifest `http://catamaran.labs.cs.uu.nl/dist/nix/channels/[channel]/MANIFEST' is too old (i.e., for Nix <= 0.7) then you should unsubscribe from the offending channel (nix-channel --remove URL; leave out /MANIFEST), and subscribe to the same URL, with channels replaced by channels-v3 (e.g., http://catamaran.labs.cs.uu.nl/dist/nix/channels-v3/nixpkgs-unstable). Nix 0.8 has the following improvements: The cryptographic hashes used in store paths are now 160 bits long, but encoded in base-32 so that they are still only 32 characters long (e.g., /nix/store/csw87wag8bqlqk7ipllbwypb14xainap-atk-1.9.0). (This is actually a 160 bit truncation of a SHA-256 hash.) Big cleanups and simplifications of the basic store semantics. The notion of "closure store expressions" is gone (and so is the notion of "successors"); the file system references of a store path are now just stored in the database. For instance, given any store path, you can query its closure: $ nix-store -qR $(which firefox) ... lots of paths ... Also, Nix now remembers for each store path the derivation that built it (the "deriver"): $ nix-store -qR $(which firefox) /nix/store/4b0jx7vq80l9aqcnkszxhymsf1ffa5jd-firefox-1.0.1.drv So to see the build-time dependencies, you can do $ nix-store -qR $(nix-store -qd $(which firefox)) or, in a nicer format: $ nix-store -q --tree $(nix-store -qd $(which firefox)) File system references are also stored in reverse. For instance, you can query all paths that directly or indirectly use a certain Glibc: $ nix-store -q --referrers-closure \ /nix/store/8lz9yc6zgmc0vlqmn2ipcpkjlmbi51vv-glibc-2.3.4 The concept of fixed-output derivations has been formalised. Previously, functions such as fetchurl in Nixpkgs used a hack (namely, explicitly specifying a store path hash) to prevent changes to, say, the URL of the file from propagating upwards through the dependency graph, causing rebuilds of everything. This can now be done cleanly by specifying the outputHash and outputHashAlgo attributes. Nix itself checks that the content of the output has the specified hash. (This is important for maintaining certain invariants necessary for future work on secure shared stores.) One-click installation :-) It is now possible to install any top-level component in Nixpkgs directly, through the web - see, e.g., http://catamaran.labs.cs.uu.nl/dist/nixpkgs-0.8/. All you have to do is associate /nix/bin/nix-install-package with the MIME type application/nix-package (or the extension .nixpkg), and clicking on a package link will cause it to be installed, with all appropriate dependencies. If you just want to install some specific application, this is easier than subscribing to a channel. nix-store -r PATHS now builds all the derivations PATHS in parallel. Previously it did them sequentially (though exploiting possible parallelism between subderivations). This is nice for build farms. nix-channel has new operations and . New ways of installing components into user environments: Copy from another user environment: $ nix-env -i --from-profile .../other-profile firefox Install a store derivation directly (bypassing the Nix expression language entirely): $ nix-env -i /nix/store/z58v41v21xd3...-aterm-2.3.1.drv (This is used to implement nix-install-package, which is therefore immune to evolution in the Nix expression language.) Install an already built store path directly: $ nix-env -i /nix/store/hsyj5pbn0d9i...-aterm-2.3.1 Install the result of a Nix expression specified as a command-line argument: $ nix-env -f .../i686-linux.nix -i -E 'x: x.firefoxWrapper' The difference with the normal installation mode is that does not use the name attributes of derivations. Therefore, this can be used to disambiguate multiple derivations with the same name. A hash of the contents of a store path is now stored in the database after a succesful build. This allows you to check whether store paths have been tampered with: nix-store --verify --check-contents. Implemented a concurrent garbage collector. It is now always safe to run the garbage collector, even if other Nix operations are happening simultaneously. However, there can still be GC races if you use nix-instantiate and nix-store --realise directly to build things. To prevent races, use the flag of those commands. The garbage collector now finally deletes paths in the right order (i.e., topologically sorted under the references relation), thus making it safe to interrupt the collector without risking a store that violates the closure invariant. Likewise, the substitute mechanism now downloads files in the right order, thus preserving the closure invariant at all times. The result of nix-build is now registered as a root of the garbage collector. If the ./result link is deleted, the GC root disappears automatically. The behaviour of the garbage collector can be changed globally by setting options in /nix/etc/nix/nix.conf. gc-keep-derivations specifies whether deriver links should be followed when searching for live paths. gc-keep-outputs specifies whether outputs of derivations should be followed when searching for live paths. env-keep-derivations specifies whether user environments should store the paths of derivations when they are added (thus keeping the derivations alive). New nix-env query flags and . fetchurl allows SHA-1 and SHA-256 in addition to MD5. Just specify the attribute sha1 or sha256 instead of md5. Manual updates.
Release 0.7 (January 12, 2005) Binary patching. When upgrading components using pre-built binaries (through nix-pull / nix-channel), Nix can automatically download and apply binary patches to already installed components instead of full downloads. Patching is "smart": if there is a *sequence* of patches to an installed component, Nix will use it. Patches are currently generated automatically between Nixpkgs (pre-)releases. Simplifications to the substitute mechanism. Nix-pull now stores downloaded manifests in /nix/var/nix/manifests. Metadata on files in the Nix store is canonicalised after builds: the last-modified timestamp is set to 0 (00:00:00 1/1/1970), the mode is set to 0444 or 0555 (readable and possibly executable by all; setuid/setgid bits are dropped), and the group is set to the default. This ensures that the result of a build and an installation through a substitute is the same; and that timestamp dependencies are revealed.
Release 0.6 (November 14, 2004) Rewrite of the normalisation engine. Multiple builds can now be performed in parallel (option ). Distributed builds. Nix can now call a shell script to forward builds to Nix installations on remote machines, which may or may not be of the same platform type. Option allows recovery from broken substitutes. Option causes building of other (unaffected) derivations to continue if one failed. Improvements to the garbage collector (i.e., it should actually work now). Setuid Nix installations allow a Nix store to be shared among multiple users. Substitute registration is much faster now. A utility nix-build to build a Nix expression and create a symlink to the result int the current directory; useful for testing Nix derivations. Manual updates. nix-env changes: Derivations for other platforms are filtered out (which can be overriden using ). by default now uninstall previous derivations with the same name. allows upgrading to a specific version. New operation to remove profile generations (necessary for effective garbage collection). Nicer output (sorted, columnised). More sensible verbosity levels all around (builder output is now shown always, unless is given). Nix expression language changes: New language construct: with E1; E2 brings all attributes defined in the attribute set E1 in scope in E2. Added a map function. Various new operators (e.g., string concatenation). Expression evaluation is much faster. An Emacs mode for editing Nix expressions (with syntax highlighting and indentation) has been added. Many bug fixes.
Release 0.5 and earlier Please refer to the Subversion commit log messages.