* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (%qemu-static-networking): New variable.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
This should make it easier to find how to get started setting up
networking.
* doc/guix.texi (Networking Setup): New section.
(Networking Services): Remove 'static-networking-service',
'dhcp-client-service-type', 'network-manager-service-type',
'connman-service-type', 'wicd-service', 'modem-manager-service-type',
'usb-modeswitch-service-type', and 'wpa-supplicant-service-type'.
It configures QEMU to use the tty it was started in for IO (as opposed to
opening a separate graphical window). This enables copy-pasting and
scrollback. Exit QEMU with C-a x.
* gnu/system/vm.scm (system-qemu-image/shared-store-script): Also add the
'-nographic' QEMU argument when called with #:graphic? #false.
* guix/scripts/system.scm (system-derivation-for-action): Propagate
the #:graphic? keyword arg.
(perform-action): Add and propagate the #:graphic? keyword arg.
(show-help): Add --no-graphic CLI arg.
(%options): Process the new --no-graphic CLI arg.
(process-action): Feed in the CLI arg through the #:graphic? keyword arg.
* doc/guix.texi (Invoking guix system): Add example to combine guix system and
invoking the vm start script into one command. Split the description of the
various options into separate paragraphs. Add a paragraph to describe
--no-graphic.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/packages/package-management.scm (guix-build-coordinator): Update to
0-40.226ec0f.
* doc/guix.texi (Guix Build Coordinator): Remove note about the service being
considered experimental, it's been stable for a while now.
* doc/contributing.texi (Running Guix Before It Is Installed): Writing "Do
<this>. But it won't work unless ..." is a bad practice.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/docker.scm (docker-configuration): Add the field
(docker-shepherd-service): Pass the list of defined variables to
make-forkexec-constructor.
* doc/guix.texi (Miscellaneous Services): Update doc.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Upstream raised these back in 2019 with CUPS 2.3.0.
* gnu/services/cups.scm (<cups-configuration>): Raise default
‘multiple-operation-timeout’ and ‘timeout’ from 300 to 900 seconds.
* doc/guix.texi (Printing Services): Adjust accordingly.
The meaning changed by accident when guix environment was replaced
by guix shell in 80edb7df65.
* doc/guix.texi (Debugging Build Failures): Add missing -D option.
This change is motivated by the need to disable the default 30 seconds timeout
that Meson uses (see: https://gitlab.gnome.org/GNOME/glib/-/issues/2522), and
also by desire to specify extra options to run the check phase without having
to override it.
* guix/build-system/meson.scm (meson-build) <test-target>: Replace argument
with...
<test-options>: ... this one.
* guix/build/meson-build-system.scm (check): Invoke 'meson test' instead of
'ninja test-target', as the former is configurable via options.
* doc/guix.texi (Build Systems) <meson-build-system>: Update doc.
* guix/import/cran.scm (download): Handle the case where URL is a list.
(fetch-description-from-tarball): New procedure.
(fetch-description): Add #:version parameter. Honor it when REPOSITORY
is 'cran. Use 'fetch-description-from-tarball' when REPOSITORY is
'bioconductor.
(description->package): SOURCE-URL may now be a list.
(cran->guix-package): Pass VERSION to 'fetch-description'.
(cran-recursive-import): Add #:version parameter.
* guix/scripts/import/cran.scm (guix-import-cran): Expect a spec rather
than a mere package name.
* doc/guix.texi (Invoking guix import): Document it.
This allows us to skip the expensive man-db profile hook in most cases.
Suggested by Liliana Marie Prikler <liliana.prikler@gmail.com>.
* guix/profiles.scm (manual-database/optional): New procedure.
(%default-profile-hooks): Use it instead of 'manual-database'.
* doc/guix.texi (Documentation): Add footnote about 'man -k' database
creation.
shell: Maintain a profile cache.
With this change, running "guix shell" (no arguments) is equivalent to:
guix environment -r ~/.cache/guix/profiles/some-root -l guix.scm
This is the cache miss. On cache hit, it's equivalent to:
guix environment -p ~/.cache/guix/profiles/some-root
... which can run in 0.1s.
* guix/scripts/shell.scm (options-with-caching): New procedure.
(parse-args): Use it.
(%profile-cache-directory): New variable.
(profile-cache-key, profile-cached-gc-root): New procedures.
(show-help, %options): Add '--rebuild-cache'.
(guix-shell)[cache-entries, entry-expiration]: New procedures.
Add call to 'maybe-remove-expired-cache-entries'.
* doc/guix.texi (Invoking guix shell): Document '--rebuild-cache'.
* guix/packages.scm (package-development-inputs): New procedure.
* guix/scripts/environment.scm (package-environment-inputs): Use it.
* tests/packages.scm ("package-development-inputs")
("package-development-inputs, cross-compilation"): New tests.
* doc/guix.texi (package Reference): Document it.
This ensures we use the same method in "make" as in "guix/self.scm".
* Makefile.am: Build guix/build/po.scm.
* build-aux/convert-xref.scm: New file.
* doc/local.mk (xref_command): Use it.
* guix/self.scm (translate-cross-references): Move it...
* guix/build/po.scm: Parse comments and flags separately to find fuzzy
flags.
(translate-cross-references): ...here.
(parse-tree->assoc): Ignore fuzzy entries.
The '#$' doesn't belong there, and will cause ‘unbound variable’ errors.
Reported-By: ss2 (on IRC)
* doc/guix.texi (Setuid Programs): Remove #$ from example.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
It is now silently ignored by knotd.
* gnu/services/dns.scm (<knot-zone-configuration>):
Remove DISABLE-ANY? field. Adjust all previous users.
* doc/guix.texi (DNS Services): Undocument it.
* gnu/packages/patches/gdm-wayland-session-wrapper-from-env.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add it.
* gnu/packages/gnome.scm (gdm): Use it.
* gnu/services/xorg.scm (<gdm-configuration>)[wayland-session]: New field.
(gdm-wayland-session-wrapper): New procedure.
(gdm-configuration-file): Point to this new procedure.
* doc/guix.texi (X Window): Update it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Add the optional flag `wayland?` in `gdm-configuration` to launch GDM with
Wayland, enabling the use of Wayland sessions with GDM.
* gnu/packages/patches/gdm-remove-hardcoded-xwayland-path.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add it.
* gnu/packages/gnome.scm (gdm): Use it.
* gnu/services/xorg.scm (<gdm-configuration>)[wayland?]: New field.
(gdm-configuration): Honor it.
(gdm-shepherd-service): Add the XCURSOR_PATH environment variable.
* doc/guix.texi (X Window): Document it
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/build/file-systems.scm (check-ext2-file-system)
(check-bcachefs-file-system, check-btrfs-file-system)
(check-fat-file-system, check-jfs-file-system, check-f2fs-file-system)
(check-ntfs-file-system, check-file-system): Take and honour new FORCE?
and REPAIR arguments. Update the docstring. Adjust all callers.
* gnu/system/file-systems.scm <file-system>: Add new SKIP-CHECK-IF-CLEAN?
and REPAIR fields.
(file-system->spec, spec->file-system): Adjust accordingly.
* gnu/build/linux-boot.scm (mount-root-file-system): Take new
SKIP-CHECK-IF-CLEAN? and REPAIR keyword arguments. Thread them through
to CHECK-FILE-SYSTEM.
* doc/guix.texi (File Systems): Document both new <file-system> options.
* guix/git.scm (ls-remote-refs): New procedure.
* tests/git.scm ("remote-refs" "remote-refs: only tags"): New tests.
* guix/import/git.scm: New file.
* doc/guix.texi (Invoking guix refresh): Document it.
* tests/import-git.scm: New test file.
* Makefile.am (MODULES, SCM_TESTS): Register the new files.
Co-authored-by: Sarah Morgensen <iskarian@mgsn.dev>
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* guix/build-system/go.scm (go-target): New procedure.
(go-build): Add goarch, goos keywords. Adjust bag depending if doing a
native or cross compile.
(go-cross-build): New procedure.
* guix/build/go-build-system.scm (setup-go-environment): Accept goarch,
goos keywords. Set go environment variables based on target architecture.
* doc/guix.texi (Build Systems): Mention new go-build-system keywords.
* doc/guix-cookbook.texi: clarify Linode recipe
Reword paragraph about adding the Guix device disk to Debian config.
Improve example commands for sftp-ing files to the server.
Minor wording fixes
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* guix/git.scm (resolve-reference): Rewrite tag-or-commit case to recognize
'git describe' style identifiers and resolve them as commits.
* doc/guix.texi (origin Reference): Mention it.
* gnu/services/version-control.scm (gitile-service-type): New variable.
* doc/guix.texi (Version Control Services): Document it.
* gnu/tests/version-control.scm (%test-gitile): New variable.
* doc/guix.texi (Invoking guix import): Let the item name be
'minetest' instead of 'contentdb'.
Signed-off-by: Leo Prikler <leo.prikler@student.tugraz.at>
New record <setuid-program> with fields for setting the specific user
and group, as well as specifically selecting the setuid and setgid bits,
for a program within the setuid-program-service.
* gnu/services.scm (setuid-program-file-like-deprecated): New function.
(setuid-program-service-type): Make use of
setuid-program->activation-gexp. Adjust the extend property to handle
<setuid-program>.
* gnu/build/activation.scm (activate-setuid-programs): Update to expect a
<setuid-record> list for each program entry.
* gnu/system.scm: (operating-system-setuid-programs): Renamed to
%operating-system-setuid-programs and replace it with new procedure.
(operating-system-default-essential-services,
hurd-default-essential-services): Replace
operating-system-setuid-programs with
%operating-system-setuid-programs.
* gnu/system/setuid.scm: New file.
* doc/guix.texi (Setuid Programs): Document <setuid-program>.
Co-authored-by: Brice Waegeneire <brice@waegenei.re>
Fixes <https://issues.guix.gnu.org/40997>.
* gnu/bootloader.scm (<bootloader-configuration>): New 'targets' field.
(%bootloader-configuration-target): New procedure.
(bootloader-configuration-target): Add deprecation warning.
(bootloader-configuration-targets): New procedure.
* guix/scripts/system.scm (install): Access targets via
bootloader-configuration-targets.
(perform-action)[bootloader-target]: Remove unused argument and update doc.
Access targets via bootloader-configuration-targets and fix indentation.
(process-action): Access targets via bootloader-configuration-targets.
Do not provide the unused BOOTLOADER-TARGET argument when applying
`perform-action'.
* guix/scripts/system/reconfigure.scm (install-bootloader-program): Rename
DEVICE argument to DEVICES. Adjust doc and comment. Apply `installer' and
`disk-installer' for every DEVICES.
(install-bootloader): Access targets via bootloader-configuration-targets and
rename variable from DEVICE to DEVICES.
* gnu/tests/install.scm: Adjust accordingly.
* tests/guix-system.sh: Likewise.
* gnu/tests/reconfigure.scm (run-install-bootloader-test): Adjust the DEVICES
argument so that it is a list.
* doc/guix.texi: Update doc.
Multiple people are affected by 'guix pull' hangup.
The reproducer is:
$ po4a-translate -d -M UTF-8 -L UTF-8 -k 0 -f texinfo \
-m "doc/guix.texi" -p "po/doc/guix-manual.de.po" -l "doc/guix.de.texi.tmp"
The regression is bisected down to commit fc29c80b9
("guix: opam: More flexibility in the importer").
The workaround is to avoid multiline @code{...} directive.
* doc/guix.texi: Avoid multiline @code{...} directive.
Signed-off-by: Julien Lepiller <julien@lepiller.eu>
* guix/scripts/import/opam.scm: Pass all instances of --repo as a list
to the importer.
* guix/import/opam.scm (opam-fetch): Stop expecting "expanded"
repositories and call get-opam-repository instead to keep values
"symbolic" as long as possible and factorize.
(get-opam-repository): Use the same repository source as CLI opam does
(i.e. HTTP-served index.tar.gz instead of git repositories).
(find-latest-version): Be more flexible on the repositories structure
instead of expecting packages/PACKAGE-NAME/PACKAGE-NAME.VERSION/.
* tests/opam.scm: Update the call to opam->guix-package since repo is
now expected to be a list and remove the mocked get-opam-repository
deprecated by the support for local folders by the actual
implementation.
* doc/guix.texi: Document the new semantics and valid arguments for the
--repo option.
Signed-off-by: Julien Lepiller <julien@lepiller.eu>
* guix/build-system/dune.scm: Add a profile parameter.
* guix/build/dune-build-system.scm (build): Use it.
* doc/guix.texi: Document it.
* gnu/packages/ocaml.scm: Remove profile being set from build flags.
Signed-off-by: Julien Lepiller <julien@lepiller.eu>
* gnu/system/pam.scm (unix-pam-service): Add account and session PAM entries
for pam-gnupg. Don't pass "#f" to "allow-root?" argument, because "lambda*"
already does this by default.
* doc/guix.texi (X Window): Document this.
* gnu/services/xorg.scm (<slim-configuration>)[gnupg?]: New record field.
(slim-pam-service): Pass "#:gnupg?" argument to "unix-pam-service".
This is a follow-up of d128c6fd33.
* gnu/services/cuirass.scm (<cuirass-remote-server-configuration>)
[no-publish?]: Rename it to ...
[publish?]: ... this new field.
(cuirass-shepherd-service): Adapt it.
* doc/guix.texi (Cuirass remote building): Document it.
* doc/guix.texi (Scheduled Job Execution): Specify the 'displayable' argument
for the 'updatedb-job' example. Add a tip to better name jobs, referring to
the modified example.
This reverts commit 4673f81793, which reverted
commit 69dcc24c9f with the fix detailed below.
Thanks to Christopher Baines for reporting the failure and proposing a fix.
* guix/self.scm (compiled-guix) [*system-test-modules*]: Add the test data
files via the 'extra-files' argument.
* gnu/local.mk (dist_patch_DATA): Move the tests/data/jami-dummy-account.dat
file to...
* gnu/local.mk (MODULES_NOT_COMPILED): ... here.
* gnu/services/telephony.scm (string-or-computed-file?)
(string-list?, account-fingerprint-list?): New procedures.
(maybe-string-list, maybe-account-fingerprint-list)
(maybe-boolean, maybe-string, jami-account-list): New configuration field
types.
(serialize-string-list, serialize-boolean, serialize-string)
(jami-account, jami-account->alist, jami-configuration)
(jami-account-list?, jami-account-list-maybe): New procedures.
(%jami-accounts): New variable.
(jami-configuration->command-line-arguments): New procedure.
(jami-dbus-session-activation, jami-shepherd-services): New procedures.
(jami-service-type): New variable.
* gnu/build/jami-service.scm: New file.
* gnu/tests/data/jami-dummy-account.dat: Likewise.
* gnu/tests/telephony.scm: Likewise.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register them.
* Makefile.am (SCM_TESTS): Register the test file.
(dist_patch_DATA): Register the new data file.
* doc/guix.texi (Telephony Services): Document it.
* guix/scripts/pack.scm (self-contained-tarball/builder)
[extra-options]: New argument.
(self-contained-tarball, squashfs-image, docker-image)
(debian-archive): Likewise. Remove two TODO comments. Document
EXTRA-OPTIONS. Use the custom control files when provided.
(%deb-format-options): New variable.
(show-deb-format-options, show-deb-format-options/detailed): New procedures.
(%options): Register new options.
(show-help): Augment with new usage.
(guix-pack): Validate and propagate new argument values.
* doc/guix.texi (Invoking guix pack)[deb]: Document how to list advanced
options. Add an example.
* tests/pack.scm (deb archive...): Provide extra-options to the debian-archive
procedure, and validate that the provided files are embedded in the pack.
The output of the listing of available packages now contains a mix of tab and
space characters, so that its output is more pleasing to read. This preserves
most simple uses of 'cut', but the added extra space padding can cause a
change in behavior in some scenarios.
* doc/guix.texi (Invoking guix build): Replace 'cut' by 'awk' in one of the
examples.
Fixes <https://bugs.gnu.org/47428>.
Reported by Leo Famulari <leo@famulari.name>.
* doc/build.scm (translated-texi-manuals): Explicitly use 'guile-3.0-latest'.
Since the update to the 2.6.2 release, the closure size of zile has
increased. Switch to mg which is lighter.
* gnu/system.scm (%base-packages-interactive): Replace zile by mg.
* doc/guix.texi (Proceeding with the Installation,
Using the Configuration System): Adapt those sections.
* guix/build/utils.scm (search-input-directory): New procedure.
* doc/guix.texi (Build Utilities): Document it next to
'search-input-file'. Tweak wording.
This is a follow-up to c2ff06e5e4, in which
a link to the cookbook was added using a different name than the actual
section.
* doc/guix.texi (Using the Configuration System): Fix broken link to cookbook.
This is a follow-up to the discussion in <https://bugs.gnu.org/48974>.
* doc/guix-cookbook.texi (System Configuration): Add a brief guide that
explains auto login a user to one TTY.
* doc/guix.texi (System Services): Add an texinfo anchor, so that the cookbook
entry "Auto Login a User to a Specific TTY" can refer back to the precise
point that the GNU Guix Reference manual. Also add a reference to the
cookbook that shows how to auto login a specific user to one TTY.
Signed-off-by: Leo Prikler <leo.prikler@student.tugraz.at>
It will be used in the 'optional-tests' linter.
* guix/gexp.scm (gexp->approximate-sexp): New procedure.
* tests/gexp.scm
("no references", "unquoted gexp", "unquoted gexp (native)")
("spliced gexp", "unspliced gexp, approximated")
("unquoted gexp, approximated"): Test it.
* doc/gexp.scm ("G-Expressions"): Document it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* .dir-locals.el (scheme-mode)[gexp->derivation]: Define indentation rule.
* guix/scripts/pack.scm (debian-archive): New procedure.
(%formats): Register the new deb format.
(show-formats): Add it to the usage string.
* tests/pack.scm (%ar-bootstrap): New variable.
(deb archive with symlinks): New test.
* doc/guix.texi (Invoking guix pack): Document it.
* NEWS: Add news entry.
* gnu/services/vpn.scm (<strongswan-configuration>): New record type.
(charon-plugins, strongswan-configuration-file)
(strongswan-shepherd-service, strongswan-service-type): New variables.
* doc/guix.tex (VPN Services): Document them all.
* doc/contributing.texi (Contributing): Update the short description of the
"Tracking Bugs and Patches" chapter in the menu.
(Tracking Bugs and Patches): Split this section into three new subsections,
titled "The Issue Tracker", "Debbugs User Interfaces", and "Debbugs Usertags".
Of these, only the "Debbugs Usertags" is actually new.
For some time, OpenSSH's option 'PermitRootLogin' has deprecated the
ambiguous argument 'without-password' with 'prohibit-password'.
* doc/guix.texi (Network Services): Replace 'without-password by
'prohibit-password.
* gnu/machine/digital-ocean.scm (guix-infect): Change system
configuration to use 'prohibit-password.
* gnu/services/ssh.scm (openssh-configuration): Change comment to use
'prohibit-password.
(openssh-config-file): Add support for 'prohibit-password to
'permit-root-login'. Warn about deprecated 'without-password usage.
* gnu/tests/ganeti.scm (%ganeti-os): Replace 'without-password by
'prohibit-password.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
Note: this merge actually changes the 'curl' and 'python-attrs' derivations,
as part of solving caf4a7a277 and
12964df69a respectively.
4604d43c0e (gnu: gnutls@3.6.16: Fix cross-compilation.) was ignored because it
cannot currently be tested.
Conflicts:
gnu/local.mk
gnu/packages/aidc.scm
gnu/packages/boost.scm
gnu/packages/curl.scm
gnu/packages/nettle.scm
gnu/packages/networking.scm
gnu/packages/python-xyz.scm
gnu/packages/tls.scm
In addition to substitutes from ci.guix.gnu.org. There are more changes that
can be made in the future, but these changes seem like a good start.
* config-daemon.ac (guix_substitute_urls): Add https://bordeaux.guix.gnu.org.
* guix/scripts/substitute.scm (%default-substitute-urls): Add
http://bordeaux.guix.gnu.org.
* guix/store.scm (%default-substitute-urls): Add bordeaux.guix.gnu.org.
* doc/guix.texi: Adjust accordingly.
* doc/contributing.texi: Adjust accordingly.
* doc/guix.texi (Globally-Visible Packages): Change "bind" variable
name to the actual variable name, "isc-bind".
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
The procedure ‘which’ from (guix build utils)
is used for two different purposes:
1. for finding the absolute file name of a binary
that needs to run during the build process
2. for finding the absolute file name of a binary,
for the target system (as in --target=TARGET),
e.g. for substituting sh->/gnu/store/.../bin/sh,
python->/gnu/store/.../bin/python.
When compiling natively (target=#f in Guix parlance),
this is perfectly fine.
However, when cross-compiling, there is a problem.
"which" looks in $PATH for binaries. That's good for purpose (1),
but incorrect for (2), as the $PATH contains binaries from native-inputs
instead of inputs.
This commit defines a ‘search-input-file’ procedure. It functions
like 'which', but instead of searching in $PATH, it searches in
the 'inputs' of the build phase, which must be passed to
‘search-input-file’ as an argument. Also, the file name must
include "bin/" or "sbin/" as appropriate.
* guix/build/utils.scm (search-input-file): New procedure.
* tests/build-utils.scm
("search-input-file: exception if not found")
("search-input-file: can find if existent"): Test it.
* doc/guix.texi (File Search): Document it.
Partially-Fixes: <https://issues.guix.gnu.org/47869>
Co-Authored-By: Ludovic Courtès <ludo@gnu.org>
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Networking Services): Allow established and related incoming
connections in example iptables configuration.
Signed-off-by: Arun Isaac <arunisaac@systemreboot.net>
* gnu/tests/linux-modules.scm
(run-loadable-kernel-modules-service-test): Actually load the modules
with kernel-module-loader-service-type. Use a singleton service instead
of defining a custom one.
* doc/guix.texi (Service Reference): To give an example of
linux-loadable-module-service-type use a singleton instead of defining a
new service.
Fixes <https://issues.guix.gnu.org/48739>. It may seem silly, but when not
realizing this firsthand, it can be quite surprising and thus not obvious to
troubleshoot. Thanks to Eric Brown for their insightful comments on the
tracker.
* doc/guix.texi (Running Guix in a VM): Add a note that networking support
must be available in the Guix System operating system declaration used for the
VM.
Reported by munksgaard on #guix.
* doc/guix.texi (Invoking guix pack): Replace "geiser" with
"emacs-geiser" in examples.
(Invoking guix refresh): Likewise.
* gnu/services/networking.scm (maybe-number?, maybe-string?): New procedures.
(<opendht-configuration>): New configuration record.
(%opendht-accounts): New variable.
(opendht-configuration->command-line-arguments): New procedure.
(opendht-shepherd-service, opendht-service-type): New variables.
* doc/guix.texi (Networking Services): Document the new service.
Also replace the obsolete 'guix system vm-image' command mention by the 'guix
system image'.
* doc/guix.texi (Running Guix in a VM): Remove VM image decompression
instruction.
<guix system vm-image>: Replace by 'guix system image'.
* gnu/system.scm (operating-system-directory-base-entries): Remove code
to handle generation of "kernel" for linux-libre kernels.
(operating-system-default-essential-services): Instantiate
linux-builder-service-type.
(package-for-kernel): Move ...
* gnu/services.scm: ... to here.
(linux-builder-service-type): New variable.
(linux-builder-configuration): New type.
(linux-loadable-module-service-type): New variable.
* gnu/tests/linux-modules.scm (run-loadable-kernel-modules-test): Move
code to ...
(run-loadable-kernel-modules-test-base): ... new procedure here.
(run-loadable-kernel-modules-service-test): New procedure.
(%test-loadable-kernel-modules-service-0): New variable.
(%test-loadable-kernel-modules-service-1): New variable.
(%test-loadable-kernel-modules-service-2): New variable.
* doc/guix.texi: Document linux-loadable-module-service-type.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
* gnu/services/mail.scm (protocol-configuration): Add an ‘imap-metadata?’
setting to enable IMAP METADATA support in the ‘imap’ protocol.
* doc/guix.texi (Mail Services): Document it.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
Regression introduced in 58805da44d.
* gnu/packages/linux.scm (rasdaemon)[description]: Avoid @acronym since
Guile's Texinfo module doesn't currently support @comma{}.
* doc/guix.texi (Linux Services): Use @comma{} within @acronym.
The qcow2 format supports compression, and the qcow2 type supported by 'guix
system image' produces compressed qcow2 images.
* Makefile.am (release): Do not re-compress the qcow2 VM images with xz.
* doc/guix.texi (Running Guix in a VM): Adjust VM image URL.
It was discussed on guix-devel that the manual only needs to have correct
instructions for the latest release.
* doc/guix.texi (OPENPGP-SIGNING-KEY-ID): Update to my public OpenPGP key.
(OPENPGP-SIGNING-KEY-URL): Adjust URL.
The upcoming 1.3.0 release will be signed with my OpenPGP key; subsequent
releases may also be.
* doc/guix.texi (OPENPGP-SIGNING-KEY-ID, OPENPGP-SIGNING-KEY-URL): Rename to...
(OPENPGP-SIGNING-KEY-ID-1, OPENPGP-SIGNING-KEY-URL-1): ... these,
respectively.
(OPENPGP-SIGNING-KEY-ID-2, OPENPGP-SIGNING-KEY-URL-2): New variables.
(Binary Installation): Adjust to cover for the new key.
(USB Stick and DVD Installation): Likewise.
(Invoking guix refresh): Adjust accordingly.
The xz-compressed image is 23% smaller than the original ISO image (with
built-in zlib compression), but the extra decompression step is
unconventional and often a hindrance for users. See discussion at
<https://lists.gnu.org/archive/html/guix-devel/2021-04/msg00497.html>.
* Makefile.am (release): Do not compress ISO images.
* doc/guix.texi (USB Stick and DVD Installation): Remove ".xz" suffix
from URL and file name.
(Copying to a USB Stick, Burning on a DVD): Remove introductory words,
@enumerate, and first item.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
This change is so that the list of translated Texinfo files remain in sync
with the list of supported (translated) languages.
* doc/local.mk (MANUAL_LANGUAGES, COOKBOOK_LANGUAGES): New variables.
(lang_to_texinfos): New function.
(TRANSLATED_INFO): Use it to construct the list of files.
Modified-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
The upcoming 1.3.0 release will be signed with my OpenPGP key; subsequent
releases may also be.
* doc/guix.texi (OPENPGP-SIGNING-KEY-ID, OPENPGP-SIGNING-KEY-URL): Rename to...
(OPENPGP-SIGNING-KEY-ID-1, OPENPGP-SIGNING-KEY-URL-1): ... these,
respectively.
(OPENPGP-SIGNING-KEY-ID-2, OPENPGP-SIGNING-KEY-URL-2): New variables.
(Binary Installation): Adjust to cover for the new key.
(USB Stick and DVD Installation): Likewise.
(Invoking guix refresh): Adjust accordingly.
This is a follow up to commit ebf5d77eab, which added the qcow2 file extension
to the VM image file name.
* doc/guix.texi (Running Guix in a VM): Update URL.
* gnu/services/databases.scm (mysql-configuration): Add extra-environment
(mysql-service): Use #:log-file and #:environment-variables
* doc/guix.texi: Document it.
Signed-off-by: Leo Prikler <leo.prikler@student.tugraz.at>
Adapting the snippet corresponding to the default value of the net-options
field of the hurd-vm-configuration record shown in the manual would easily
lead to a broken childhurd service, due to the presence of extraneous spaces
in the option string.
* doc/guix.texi (Virtualization Services)[hurd-vm-configuration]
<net-options>: Use string-append to properly form the option string.
This importer has suffered from bitrot and no longer works with current
Nix and Nixpkgs. See <https://bugs.gnu.org/32339> and
<https://bugs.gnu.org/36255>.
* guix/import/snix.scm, guix/scripts/import/nix.scm,
tests/snix.scm: Remove.
* Makefile.am (MODULES, SCM_TESTS): Remove them.
* guix/scripts/import.scm (importers): Remove "nix".
* build-aux/test-env.in: Remove NIXPKGS variable.
* configure.ac: Remove '--with-nixpkgs' option.
* doc/guix.texi (Invoking guix import): Remove bit about "guix import
nix".
* etc/completion/fish/guix.fish: Likewise.
Use the default client port rather than the default agent communication port
for the queue builds script.
* gnu/services/guix.scm (<guix-build-coordinator-queue-builds-configuration>):
Change coordinator default.
To the agent configuration.
* gnu/services/guix.scm (<guix-build-coordinator-agent-configuration>): New
field, max-1min-load-average.
(guix-build-coordinator-agent-configuration-max-1min-load-average): New
procedure.
(guix-build-coordinator-agent-shepherd-services): If set, include the
max-1min-load-average in the agent arguments.
As discussed on #guix IRC, several of us struggle to reliably choose the
right option based on the old labels:
https://logs.guix.gnu.org/guix/2021-04-20.log#182137
* doc/build.scm (html-manual-indexes): Try to distinguish between the
two options more clearly.
* gnu/services/vpn.scm (<wireguard-peer>): Add 'keep-alive' field.
(wireguard-configuration-file): Use it.
* doc/guix.texi (VPN Services): Document it.
This importer has suffered from bitrot and no longer works with current
Nix and Nixpkgs. See <https://bugs.gnu.org/32339> and
<https://bugs.gnu.org/36255>.
* guix/import/snix.scm, guix/scripts/import/nix.scm,
tests/snix.scm: Remove.
* Makefile.am (MODULES, SCM_TESTS): Remove them.
* guix/scripts/import.scm (importers): Remove "nix".
* build-aux/test-env.in: Remove NIXPKGS variable.
* configure.ac: Remove '--with-nixpkgs' option.
* doc/guix.texi (Invoking guix import): Remove bit about "guix import
nix".
* etc/completion/fish/guix.fish: Likewise.
* gnu/services/databases.scm (mysql-configuration): Add extra-environment
(mysql-service): Use #:log-file and #:environment-variables
* doc/guix.texi: Document it.
Signed-off-by: Leo Prikler <leo.prikler@student.tugraz.at>
Fixes <https://bugs.gnu.org/46737>.
PostgreSQL running with a different socket directory to the default one in the
package itself breaks some services, this commit restores the previous
behaviour where PostgreSQL by default will run with a socket directory that
matches the default used by PostgreSQL packaged for Guix.
Switching to a different default value can happen, but only alongside changing
the PostgreSQL package.
* gnu/services/databases.scm (<postgresql-config-file>)[socket-directory]:
Change default to #false.
* doc/guix.texi (Database Services): Update documentation, and specify a
different value for disabling connections via sockets.
* gnu/tests/guix.scm (%guix-data-service-os): Use default PostgreSQL
behaviour.
* gnu/tests/monitoring.scm (%zabbix-os): Likewise.
* gnu/tests/web.scm (patchwork-os): Likewise.
Signed-off-by: Leo Famulari <leo@famulari.name>
Before this change, the 'gnu-build-system' phases were listed in the
"Build Systems" section, and then summarized in the "Build Phases"
section. This moves everything to "Build Phases".
* doc/guix.texi (Build Systems): Move phase table to...
(Build Phases): ... here. Rearrange surrounding text.
This allows importing packages with complicated version specific dependency
chains without the package symbol names colliding.
* doc/guix.texi (Invoking guix import): Document the --pin-versions option.
Mention that a specific version can be imported. Remove the experimental
warning.
* guix/import/go.scm (go-module->guix-package-name)[version]: Add optional
argument. Rewrite the character translation in terms of string-map.
(go-module->guix-package): Conditionally use dependencies whose symbol include
their version, based no the value of the PIN-VERSIONS? argument.
* guix/import/utils.scm (package->definition): Add a new case where the full
version string is appended to the package symbol.
* guix/scripts/import.scm (guix-import): Correctly print forms starting
with '(define-public [...]'.
* guix/scripts/import/go.scm (guix-import-go): Conditionally include the
version in the package symbols defined.
Otherwise, the shell tries to perform pattern-matching based on the "?"
character.
Reported by nij in #guix.
* doc/guix.texi (Binary Installation): Add quotes around OPENPGP-SIGNING-KEY-URL.
This updater currently covers 2.4% of the packages.
* guix/gnu-maintenance.scm (latest-sourceforge-release): New procedure.
(%sourceforge-updater): New variable.
* doc/guix.texi (Invoking guix refresh): Document it.
