* gnu/services/desktop.scm (seatd-service-type): New variable
* gnu/services/desktop.scm (seatd-configuration): New data type
Signed-off-by: Lars-Dominik Braun <ldb@leibniz-psychology.org>
* gnu/services/base.scm (greetd-service-type): New variable
* gnu/services/base.scm (greetd-configuration): New data type
* gnu/services/base.scm (greetd-terminal-configuration): New data type
* gnu/services/base.scm (greetd-agreety-session): New data type
* gnu/services/base.scm (pam-limits-service-type): Should be aware of
greetd PAM service
* gnu/services/pam-mount.scm (pam-mount-pam-service): Should be aware
of greetd PAM service
Signed-off-by: Lars-Dominik Braun <ldb@leibniz-psychology.org>
hex.pm is a package repository for Erlang and Elixir.
* guix/scripts/import.scm (importers): Add "hexpm".
* guix/scripts/import/hexpm.scm, guix/import/hexpm.scm,
guix/hexpm-download.scm: New files.
* guix/import/utils.scm (source-spec->object): Add "hexpm-fetch" to list of
fetch methods.
* guix/upstream.scm (package-update/hexpm-fetch): New function.
(%method-updates) Add it.
* Makefile.am: Add them.
* doc/guix.texi (Networking Services)
(Messaging Services)
(Telephony Services)
(File-Sharing Services)
(VPN Services)
(Power Management Services)
(Complex Configurations)
(Desktop Home Services): Remove mentions of the 'disabled symbol or
replace them by *unspecified*, depending on context.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/dbus.scm (<dbus-configuration>)[verbose?]: New field.
(dbus-shepherd-service): Use it.
(dbus-service)[verbose?]: Add argument and update doc.
* doc/guix.texi (Desktop Services): Document it.
Fixes <https://issues.guix.gnu.org/54783>.
* gnu/services/linux.scm (zram-device-configuration)
[priority]: Adapt to use #f or an integer from 0 to 32767. Add sanitizer to
warn for the change and delay the field.
(zram-device-configuration->udev-string): Adapt as above.
* doc/guix.texi (Zram Device Service): Remove double copyright line.
Change priority description to refer to the Swap Space one, and suggest not
leaving the default #f on to properly use zram.
Reported-by: Stefan Baums <baums@stefanbaums.com>
Modified-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami'
and 'jami-provisioning' system tests to pass again.
In version 0.9.0, Shepherd constructors are now run concurrently, via
cooperative scheduling (Guile Fibers). The Jami service previously relied on
blocking sleeps while polling for D-Bus services to become ready after forking
a process; this wouldn't work anymore since while blocking the service process
wouldn't be given the chance to finish starting. The new reliance on Fibers
in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant
that it wouldn't work outside of Shepherd anymore. Finally, the
'start-service' Shepherd procedure used in the test suite would cause the Jami
daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0).
To fix/simplify these problems, this change does the following:
1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify
things, such as avoiding the need to fork 'dbus-send' processes.
2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries'
waiting syntax.
3. A 'dbus' package variant is used to adjust the session bus configuration,
tailoring it for the use case at hand.
4. Avoid start-service in the tests, preferring 'jami-service-available?' for
now.
* gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes)
(deserialize-item, serialize-boolean, dbus-dict->alist)
(dbus-array->list, parse-account-ids, parse-account-details)
(parse-contacts): Delete procedures.
(%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group)
(%send-dbus-debug): Delete parameters.
(jami-service-running?): New procedure.
(send-dbus/configuration-manager): Rename to...
(call-configuration-manager-method): ... this. Turn METHOD into a positional
argument. Turn ARGUMENTS into an optional argument. Invoke
`call-dbus-method' instead of `send-dbus', adjusting callers accordingly.
(get-account-ids, id->account-details, id->account-details)
(id->volatile-account-details, username->id, add-account remove-account)
(username->contacts, remove-contact, add-contact, set-account-details)
(set-all-moderators, username->all-moderators?, username->moderators)
(set-moderator): Adjust accordingly.
(with-retries, send-dbus, dbus-available-services)
(dbus-service-available?): Move to ...
* gnu/build/dbus-service.scm: ... this new module.
(send-dbus): Rewrite to use the Guile AC/D-Bus library.
(%dbus-query-timeout, sleep*): New variables.
(%current-dbus-connection): New parameter.
(initialize-dbus-connection!, argument->signature-type)
(call-dbus-method): New procedures.
(dbus-available-services): Adjust accordingly.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register new module.
* gnu/packages/glib.scm (dbus-for-jami): New variable.
* gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to
dbus-for-jami.
(jami-dbus-session-activation): Write a D-Bus daemon configuration file at
'/var/run/jami/session-local.conf'.
(jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers
as extensions. Adjust imported modules. Remove no longer used parameters.
<jami-dbus-session>: Use a PID file, avoiding the need for the manual
synchronization.
<jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using
'jami-service-available?' instead of 'dbus-service-available?'.
* gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set
DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use
'jami-service-available?' to determine if the service is started rather than
the now problematic Shepherd's 'start-service'.
* doc/he-config-bare-bones.scm: Adujst example according to changes in
bash-service-type and home-files-service-type.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
For single-disk installs (external USBs) and for amnesiac UEFIs, Guix is not
found using its default Grub EFI bootloader location of
/boot/efi/EFI/Guix/grubx64.efi means the Guix install will not be found.
To handle this, we can place the bootloader file in the UEFI specification
location, overwriting any other OS that may have placed a file there. This
location is namely /boot/efi/EFI/BOOT/BOOTX64.efi. Grub has explicit support
for this location/situation with the `--removable` flag.
* gnu/bootloader/grub.scm (install-grub-efi-removable)
(grub-efi-removable-bootloader): New variables.
* doc/guix.texi (Bootloader Configuration): Document it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Follow up of beaf701d65.
* doc/guix.texi: Replace the shell old-style command substitution with
the new-style one.
Signed-off-by: Julien Lepiller <julien@lepiller.eu>
Turns out this platform doesn't have a bootstrap tarball and should be
considered as not supported for now.
* guix/platforms/s390.scm: Remove it.
* Makefile.am (MODULES): Adapt it.
* doc/guix.texi (Foreign Architectures): Ditto.
* gnu/packages/package-management.scm (guix-build-coordinator): Update to
0-53.3de63f1.
* gnu/services/guix.scm (guix-build-coordinator-queue-builds-configuration-guix-data-service-build-server-id):
New procedure.
(guix-build-coordinator-queue-builds-shepherd-services): Use the guix-data-service-build-server-id.
* doc/guix.texi (Guix Build Coordinator): Document the new queue builds
configuration field.
Also factorize the --system and --target build options. Check that the passed
system and target arguments are known platforms.
* doc/guix.texi (Additional Build Options): Document the new --list-systems
and --list-targets options.
* guix/scripts/build.scm (show-cross-build-options-help,
show-emulated-build-options-help, list-systems, list-targets): New procedures.
(%standard-cross-build-options, %standard-emulated-build-options): New
variables.
(show-help): Remove --system and --target entries and use
show-cross-build-options-help and show-emulated-build-options-help procedures instead.
(%options): Remove --system and --target entries and use
%standard-cross-build-options and %standard-emulated-build-options variables instead.
* guix/scripts/archive.scm (show-help, %options): Adapt them.
* guix/scripts/environment.scm: Ditto.
* guix/scripts/graph.scm: Ditto.
* guix/scripts/pack.scm: Ditto.
* guix/scripts/pull.scm: Ditto.
* guix/scripts/size.scm: Ditto.
* guix/scripts/weather.scm: Ditto.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* doc/guix.texi (X Window): Remove duplicate sddm-configuration @deftp,
after merging the better parts into the remaining one.
Reported by dgcampea in #guix.
For the ‘why’, see the docstring next to $SSL_CERT_DIR. In later commits,
packages will be changed to use these variables and the variables will be
added to more packages.
* guix/search-paths.scm ($SSL_CERT_DIR, $SSL_CERT_FILE): New variables.
* doc/guix.texi (Search Paths): Document them.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Invoking guix package): Remove explanation of
'specifications->manifest' and 'package->development-manifest'. Link to
"Writing Manifests".
(Inferiors): Likewise.
(Invoking guix shell): Add anchor and link to 'package->development-manifest'.
(Invoking guix pack): Likewise.
(Writing Manifests): New section.
(Using TeX and LaTeX): Link to "Writing Manifests".
* gnu/services/guix.scm (nar-herder-configuration-log-level): New procedure.
(nar-herder-shepherd-services): Pass the log-level to the nar-herder process.
* doc/guix.texi (Nar Herder): Document configuring the log-level.
That way, the "sk" index for 'guix-manual' is empty, because
'guix-manual' lacks an "sk" translation.
* doc/build.scm (html-manual-identifier-index)[build](html-files):
Gracefully handle 'scandir' returning #f.
Previously, 'guix-manual-text-domain' could be passed the cookbook
language list as its second argument. Thus, it started failing when the
set of cookbook languages was no longer a subset of the manual
languages, starting with commit
93bfd4d9c7, which removed "sk" from
'guix-manual' but kept it for 'guix-cookbook'.
* doc/build.scm (%manual-languages, %cookbook-languages): New
variables.
(%languages): Use them.
(guix-manual-text-domain): Give LANGUAGES a valid default value.
(localization-helper-module): Remove optional argument to
'guix-manual-text-domain'.
