This also switches to use guile-next, which includes important fixes to
invalid unicode handling with suspendable ports, which is necessary for the
agent.
* gnu/packages/package-management.scm (guix-build-coordinator): Update to
0-94.c4c4f5a.
* gnu/services/guix.scm: Use guile-next for the coordinator service.
Change-Id: I853539a612fd0b41a6c63069c6291b3f42e5cdee
This construct was introduced in Shepherd 0.9.0.
* gnu/services/messaging.scm (bitlbee-shepherd-service): Use
‘make-inetd-constructor’ unconditionally.
Change-Id: Id1b79077d60609c7f95439ee0d097dfe6e66dd2e
* gnu/services/shepherd.scm (%default-modules): Remove (oop goops).
(shepherd-service-file): Use (service …) instead of (make <service> …).
Use ‘actions’ instead of ‘make-actions’.
(scm->go): Remove use of (oop goops).
(shepherd-configuration-file): Pass ‘register-services’ a list.
Use ‘start-in-the-background’ unconditionally.
Change-Id: I0ad1ba32e339c56ee31e59f160b53d3581277d97
Having a timeout seems generally preferable as it makes sure build slots
are not kept busy for no good reason (few package builds, if any, are
expected to exceed these values).
* nix/libstore/globals.cc (Settings::Settings): Change ‘maxSilentTime’
and ‘buildTimeout’.
* gnu/services/base.scm (<guix-configuration>)[max-silent-time]
[timeout]: Change default values.
* doc/guix.texi (Invoking guix-daemon, Base Services): Adjust
accordingly.
Change-Id: I25c50893f3f7fcca451b8f093d9d4d1a15fa58d8
Fixes <https://issues.guix.gnu.org/64653>.
The ‘dynamic-wind’ was causing files to be closed prematurely when
leaving the dynamic extent of PROC for instance via a delimited
continuation, using Fibers (that ‘dynamic-wind’ call was also
semantically incorrect in the first place).
* gnu/services/shepherd.scm (shepherd-configuration-file)
[config](call-with-file): Remove.
(call-with-input-file, call-with-output-file): Rewrite in terms of
‘call-with-port’.
Change-Id: Ica8af71a04f525a15be99985552063cb98cd6ee8
I think this might be better than handling it in the service. I'm seeing
locale issues on the hurd which I hope this will address.
* gnu/packages/package-management.scm (guix-build-coordinator,
guix-build-coordinator/agent-only):
* gnu/services/guix.scm (guix-build-coordinator-shepherd-services,
guix-build-coordinator-agent-shepherd-services):
Change-Id: I07ca424f434854176326a19177dc5573d53b59c2
This has been effectively replaced by the bffe.
* gnu/services/guix.scm (<guix-data-service-configuration>): Remove record
type.
(guix-build-coordinator-queue-builds-shepherd-services,
guix-build-coordinator-queue-builds-activation,
guix-build-coordinator-queue-builds-account): Remove procedures
(guix-build-coordinator-queue-builds-service-type): Remove service type.
Change-Id: I2a233fb10b12cc9bfddebaa35928b25c243f82a2
* gnu/services/telephony.scm (jami-configuration->command-line-arguments)
[wrapper]: New procedure.
Use it.
(jami-shepherd-services): In ‘start’ method of ‘jami’ service, use
‘fork+exec-command’ instead of ‘make-forkexec-constructor/container’.
Remove use of (gnu build shepherd).
Change-Id: Ic71c0c88477d92bf137d9d0a5832bae8721cc210
* gnu/services/telephony.scm (jami-shepherd-services): Use
‘least-authority-wrapper’ for ‘dbus-daemon’. Use ‘fork+exec-command’
instead of ‘make-forkexec-constructor/container’ in the ‘start’ method’.
Remove reference to (gnu build shepherd).
Reviewed-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Change-Id: I9d9f8de6ecea77950000ff64aa8c8d097dc028a0
This will only affect systems running Shepherd < 0.9.0, which was
released in August 2022.
* gnu/services/messaging.scm (bitlbee-shepherd-service): Remove
‘with-imported-modules’ and ‘modules’ field. Use
‘make-forkexec-constructor’ instead of
‘make-forkexec-constructor/container’ when ‘make-inetd-constructor’ is
missing.
Change-Id: I35a0487bccaee4799ad0d81388d540e5c7891f7e
* gnu/services/networking.scm (pagekite-shepherd-service): Define
‘config-file’ and ‘mappings’; define ‘pagekite’ in terms of
‘least-authority-wrapper’. Remove now-unneeded ‘with-imported-modules’
form and ‘modules’ field. Use ‘make-forkexec-constructor’ instead of
‘make-forkexec-constructor/container’.
Change-Id: I7c6c6266785f6a0f81a69d85f070779a0d6edd91
* gnu/services/web.scm (hpcguix-web-shepherd-service): Define
‘config-file’ and use it. Add ‘actions’ field.
Change-Id: I085df403270039ede3c13f21a5d60682c7510e2e
* gnu/services/base.scm (guix-machines-files-installation): Handle
machines being a mixed list of build-machines and lists of
build-machines.
* doc/guix.texi (Base Services): Document it.
Change-Id: Ie404562ca0b564413233c3a624046da831893dc3
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
The oci-container-configuration supports two user fields: one is the
user, from the host system, under whose authority the OCI-backed
Shepherd service is run; the other is an optional user/UID that can be
passed to the docker run invokation to override the user defined in the
OCI image.
The user from the host system is incorrectly passed to docker run
command, this patches reverts the incorrect behavior and passes the
correct container-user field value.
* gnu/services/docker.scm (oci-container-configuration): Fix the user
passed to the docker run invokation.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/web.scm (gmnisrv-service-type): Change the service name to gmnisrv
Change-Id: I1ca46c312db851486313c431fe0454786f0a673e
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/vnc.scm (xvnc-configuration->command-line-arguments): Omit X
display number when inetd? is #t.
Change-Id: I0fc8e3068f3ae22421e60e96bd40e3b6e477ca99
Previously, a default name would be used for transient inetd services,
leading to names such as #{5rjnskb6011jgmfmpgp63jp9mh9nkl20-rsync-3274}#.
* gnu/services/rsync.scm (rsync-shepherd-service): Pass #:service-name-stem.
Change-Id: I4d0a4a01e122c6eeaa85f104b083cf7e8709eac3
Packets for local host IP ranges should be coming only over lo. If that is
not the case, we should drop them. Use iif for the check instead of iifname,
lo is guaranteed to exists, and iif is faster.
* gnu/services/networking.scm (%default-nftables-ruleset): Tighten the rules.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/cuirass.scm (<cuirass-remote-server-configuration>)[log-expiry]:
New field.
(cuirass-shepherd-service): Honor it.
* doc/guix.texi (Continuous Integration): Document it.
* gnu/services/base.scm (<network-link>): Add mac-address field. Set
type field to #f by default, so it won't be mandatory. network-link
without a type will be used for existing interfaces.
(assert-network-link-mac-address, mac-address?): Add sanitizer. Allow
valid mac-address or #f.
(assert-network-link-type): Add sanitizer. Allow symbol or #f.
* gnu/services/base.scm (network-set-up/linux,
network-tear-down/linux): Adapt to new structure.
* doc/guix.texi (Networking Setup): Document it.
* gnu/tests/networking.scm (run-static-networking-advanced-test): New
variable.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Introduces 'base-transducer', a SRFI-171 based transducer that can be used as a
starting point for writing custom configuration record serializing procedures.
This also fixes the symbol maybe-value serialization test case.
* gnu/services/configuration.scm (empty-serializer?): New predicate.
(base-transducer, tfilter-maybe-value): New procedure.
(serialize-configuration): Adapt to use base-transducer.
* gnu/services/telephony.scm (jami-account->alist): Use transducers to skip
fields that are unserializable or whose field maybe-value is unset.
* tests/services/configuration.scm: Remove test-expect-fail.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Starting with 953c65ffdd, offloading to
the Hurd VM would be enabled by default. However, ‘root’ had an empty
password so any user on the host could connect to the VM over VNC, log
in as root, and potentially populate the host’s store from there. This
change fixes that.
* gnu/services/virtualization.scm (operating-system-with-locked-root-account):
New procedure.
(hurd-vm-disk-image)[transform]: Add
‘operating-system-with-locked-root-account’ when offloading.
This a avoids a Guile warning about the name collision with (guix build
utils). The warning was introduced by commit
e0e85f2b23.
* gnu/services/mcron.scm (mcron-shepherd-services): Hide ‘mkdir-p’.
* gnu/services/mcron.scm (mcron-shepherd-services): Do not #:select
‘%user-log-dir’ from (shepherd support) since it’s missing in the
Shepherd 0.8, which is still used on GNU/Hurd.
This allows for zero-configuration offloading to a childhurd.
* gnu/services/virtualization.scm (operating-system-with-offloading-account):
New procedure.
(<hurd-vm-configuration>)[offloading?]: New field.
(hurd-vm-disk-image): Define ‘transform’ and use it.
(hurd-vm-activation): Generate SSH key for user ‘offloading’ and add
authorize it via /etc/childhurd/etc/ssh/authorized_keys.d.
(hurd-vm-configuration-offloading-ssh-key)
(hurd-vm-guix-extension): New procedures.
(hurd-vm-service-type): Add GUIX-SERVICE-TYPE extension.
* gnu/tests/virtualization.scm (run-childhurd-test)[import-module?]: New
procedure.
[os]: Add (gnu build install) and its closure to #:import-modules.
[test]: Add “copy-on-write store” and “offloading” tests.
* doc/guix.texi (Virtualization Services): Document it.
With offloading to a childhurd is enabled, allowing password-less root
login in the childhurd to anyone amounts to providing write access to
the host’s store to anyone. Thus, disable password-based root logins in
the childhurd.
* gnu/services/virtualization.scm (%hurd-vm-operating-system): Change
‘permit-root-login’ to 'prohibit-password.
* gnu/tests/virtualization.scm (%childhurd-os): Provide a custom ‘os’
field for ‘hurd-vm-configuration’.
* doc/guix.texi (Virtualization Services): Remove mention of
password-less root login.
This partly automates setting up a childhurd for offloading purposes.
* gnu/services/virtualization.scm (authorize-guest-substitutes-on-host):
New procedure.
(hurd-vm-activation): Use it.
* gnu/services/base.scm (guix-machines-files-installation): New
procedure.
(<guix-configuration>)[build-machines]: New field.
(guix-activation): Call ‘ guix-machines-files-installation’.
(<guix-extension>)[build-machines]: New field.
(guix-extension-merge): Handle it.
(guix-service-type)[extend]: Likewise.
* doc/guix.texi (Daemon Offload Setup): Add note linking to
‘guix-configuration’.
(Base Services): Document ‘build-machines’ field of <guix-configuration>
and of <guix-extension>.
(Virtualization Services): Add ‘hurd-vm’ anchor.
Fixes a bug introduced in 0dd293b4d9
whereby guix-daemon on GNU/Hurd would have ‘GUIX_LOCPATH’ set to the
“wrong” locale data (2.35 instead of 2.37).
Consequently, it would fail to setlocale(3) and calls to
‘std::stoi’ (when reading the output of ‘guix authenticate’) would
throw, leading to this error message of guix-daemon:
unexpected build daemon error: stoi
This would manifest when sending store items to a childhurd:
$ guix copy --to=localhost:10022 sed
guix copy: sending 1 store item (1 MiB) to 'localhost'...
guix copy: error: unknown error while sending files over SSH
The “unknown error” is the ‘stoi’ exception.
This commit fixes that, but for the ‘guix-daemon’ service only.
* gnu/services/base.scm (guix-shepherd-service)[locales]: New variable.
Use it instead of ‘glibc-utf8-locales’.
* gnu/services/virtualization.scm (%hurd-vm-operating-system): Remove
‘port-number’ from ‘openssh-configuration’.
(hurd-vm-net-options): Change 2222 to 22 in port forwarding.
