'makeinfo --help' uses <strong> and <em> for those entries. Replace
that with CSS classes.
* doc/build.scm (html-manual-identifier-index)[build]: Adjust to handle
rewritten forms of <dt> entries.
* doc/build.scm (syntax-highlighted-html)[build][syntax-highlight]:
Handle <dt> forms and replace them.
[highlight-definition, space?]: New procedures.
Occurrences of 'list', 'cons', etc. in code snippets now link to the
relevant section of the Guile manual.
* doc/build.scm (guile-manual, %guile-manual-base-url)
(guile-mono-node-indexes, guile-split-node-indexes): New variables.
(for-all-languages, merge-index-alists): New procedures.
<top level>: Rename 'mono-node-indexes' and 'split-node-indexes' to
'guix-mono-node-indexes' and 'guix-split-node-indexes' respectively.
Add 'mono-node-indexes' and 'split-node-indexes' defined as calls to
'merge-index-alists'.
Until now, only code snippets in the manual itself would contain links
to identifier definitions. Now snippets in the cookbook also link to
definitions in the manual.
* doc/build.scm (html-manual): Add #:mono-node-indexes and #:multi-node-indexes
and pass it to 'syntax-highlighted-html'.
(pdf+html-manual): Likewise, and pass it to 'html-manual'.
<top level>: Factorize 'version' and 'source'. Define 'guix-manual',
'mono-node-indexes', and 'split-node-indexes'. Pass #:mono-node-indexes
and #:split-node-indexes to 'pdf+html-manual'.
That way we no longer have to rebuild the whole manual when fiddling
with 'build.scm'.
* doc/build.scm <top level>: Define 'select?' and pass it to
'pdf+html-manual'.
* doc/guix.texi (guix-pack)[GUIX_EXECUTION_ENGINE]: Use @env
instead of @code.
(zram-device-service-type): Use @code instead of @var for constant or
symbolic values.
(rshiny-service-type): Use @env instead of @code for R_LIBS_USER.
Commit 4b5a6fbc9b turned "Transparent
Emulation with QEMU" into a node, but that was an orphan node, with no
up/next/previous links.
* doc/guix.texi (Virtualization Services): Capitalize subsection title.
(Transparent Emulation with QEMU): Remove "@node" and add "@anchor".
(Daemon Offload Setup): Adjust cross-reference accordingly.
Fixes <https://issues.guix.gnu.org/40867>.
* doc/guix.texi (Common Build Options): Suggest using '--keep-failed' to keep
differing build results in the store rather than 'guix archive'.
Reported-by: Jonathan Brielmaier <jonathan.brielmaier@web.de>
Fixes <https://issues.guix.gnu.org/43773>.
The computed normalized load was previously obtained by dividing the load
average as found in /proc/loadavg by the number of parallel builds defined for
a build machine.
This normalized load didn't allow to compare machines with different number of
cores, as the load average reported by /proc/loadavg can be as high as the
number of cores; thus comparing that value to a fixed threshold of 2.0 would
mean machines with multiple cores were more likely to be flagged as overloaded
compared to single core machines.
This can be fixed by normalizing using the available number of cores instead
of the number of parallel jobs.
* guix/scripts/offload.scm (<build-machine>)[overload-threshold]: New field.
(node-load): Modify to return a normalized load value between 0 and 1, taking
into account the number of cores available.
(normalized-load): Remove procedure.
(report-load): New procedure.
(choose-build-machine): Adjust to use the modified 'node-load' and the new
'report-load' and 'build-machine-overload-threshold' procedures.
(check-machine-status): Adjust.
* doc/guix.texi (Daemon Offload Setup): Document the offload scheduler and the
new 'overload-threshold' field.
Suggested by Emmanuel Agullo.
* doc/contributing.texi (Running Guix Before It Is Installed): Move the
"./pre-inst-env guix-daemon" snippet at the bottom. Make it clear that
it's necessary only when hacking on guix-daemon or when guix-daemon is
not already running.
* doc/guix.texi (Using the Configuration System): In example, set
'substitute-urls' rather than 'use-substitutes?', and set 'auto-login'
for 'mingetty-configuration'.
(Service Types and Services): In example, show 'extra-options' rather
than 'use-substitutes?'.
* guix/scripts/package.scm (transaction-upgrade-entry)[upgrade]: Add
'transform' parameter. Pass PKG through it. Use
'manifest-entry-with-transformations'.
Call 'options->transformation' to get the transformation procedure.
* tests/guix-package.sh: Add 'guix package -u' test.
* tests/packages.scm ("transaction-upgrade-entry, transformation options preserved"):
New test.
* doc/guix.texi (Invoking guix package): Mention that transformations
are preserved across upgrades.
(Package Transformation Options): Likewise.
* gnu/services/ssh.scm:
(<webssh-configuration>): New record type.
(%webssh-configuration-nginx, webssh-service-type): New variables.
(webssh-account, webssh-activation, webssh-shepherd-service): New procedures.
* doc/guix.texi: Document this.
* guix/scripts/system.scm (list-image-types): New procedure,
(%options): add "image-type" and "list-image-types" options, remove
"file-system-type" option,
(show-help): adapt accordingly,
(%default-options): also adapt, and set the default "image-type" to "raw",
(perform-action): add image-type argument and remove file-system-type argument,
(process-action): adapt perform-action call,
(system-derivation-for-action): remove base-image
argument, add image-type argument, and use it to create the image passed to
"system-image".
* tests/guix-system.sh: Adapt accordingly and add a test for
"--list-image-types" command.
* doc/guix.texi (Building the Installation Image,
Invoking guix system): Adapt accordingly.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/services/virtualization.scm (initialize-hurd-vm-substitutes)
(hurd-vm-activation): New procedures.
(hurd-vm-service-type)[extensions]: Add ACTIVATION-SERVICE-TYPE
extension.
* doc/guix.texi (Transparent Emulation with QEMU): Mention GNU/Hurd.
(The Hurd in a Virtual Machine): Explain which files are automatically
installed and mention offloading.
* gnu/services/desktop.scm <elogind-configuration>: Add an
handle-lid-switch-external-power field, mapping to the
HandleLidSwitchExternalPower logind.conf setting.
* doc/guix.texi (Desktop Services): ‘Document’ it.
* doc/guix.texi (Primary URL): Move after "Specifying Channel
Authorizations" since the audience is channel authors who've already
taken care of authorizations.
* guix/packages.scm (package-input-rewriting): Add #:deep? and pass it
to 'package-mapping'.
[replacement-property]: New variable.
[rewrite]: Check it.
[cut?]: New procedure.
* tests/packages.scm ("package-input-rewriting"): Pass #:deep? #f and
ensure implicit inputs were not rewritten. Avoid 'eq?' comparisons.
("package-input-rewriting, deep"): New test.
* gnu/packages/guile.scm (package-for-guile-2.0, package-for-guile-3.0):
Pass #:deep? #f.
With this change, '--with-input', '--with-graft', etc. also apply to
implicit dependencies. Thus, it's now possible to do:
guix build python-itsdangerous --with-input=python-wrapper=python@2
or:
guix build hello --with-graft=glibc=glibc@2.29
Additionally, before, implicit inputs were not rewritten, which could
lead to duplicates in the output of 'bag-transitive-inputs' (packages
that are not 'eq?' but lead to the same derivation). This in turn would
lead to unnecessary rebuilds when using '--with-input' & co. This
change fixes it by ensuring even implicit inputs are rewritten.
Fixes <https://bugs.gnu.org/42156>.
* guix/packages.scm (package-input-rewriting/spec): Add #:deep?
defaulting to #true, and pass it to 'package-mapping'.
[replacement-property]: New variable.
[rewrite]: Check that property and set it on the result of PROC.
[cut?]: New procedure.
* tests/packages.scm ("package-input-rewriting/spec"): Ensure implicit
inputs were unchanged.
("package-input-rewriting/spec, partial match"): Pass #:deep? #f.
("package-input-rewriting/spec, deep")
("package-input-rewriting/spec, no duplicates"): New tests.
(package/inherit): Move before use.
* tests/guix-build.sh: Add tests.
* tests/scripts-build.scm ("options->transformation, with-graft"):
Compare dependencies by package name or derivation file name.
* doc/guix.texi (Defining Packages): Adjust accordingly.
* guix/packages.scm (build-system-with-package-mapping): New procedure.
(package-mapping): Add #:deep? and honor it.
* tests/packages.scm ("package-mapping"): Compare the direct inputs of
the bag of P0 and that of P1.
("package-mapping, deep"): New test.
* doc/guix.texi (Build Systems): Adapt the documentation of asd-build-system
to the replacement of '#:asd-file' and '#:asd-system-name' by '#:asd-files'
and '#:asd-systems'. Remove paragraph about one package per ASDF system.
* gnu/services/cuirass.scm (<cuirass-configuration>)[web-queries-log-file]:
New field.
(cuirass-shepherd-service): Honor it.
(cuirass-log-rotations): If defined, add the web queries log file to the log
rotation.
* gnu/services/cuirass.scm (<cuirass-configuration>)[queries-log-file]: New
field.
(cuirass-shepherd-service): Honor it.
(cuirass-log-rotations): If defined, add the queries log file to the log
rotation.
This commit follows a404716d41.
* gnu/services/docker.scm
(docker-configuration)[docker-cli]: New record field.
(docker-service-type): Use this.
* doc/guix.texi (Miscellaneous Services)[Docker Service]: Document this.
This reverts commit bcfe0f0c1e for now.
It breaks most current use(r)s of the Dovecot service and needs to be
combined with an extra modules configuration field of some kind.
See <https://issues.guix.gnu.org/43347>.
* doc/guix.texi (Invoking guix archive): Introduce the term "nar bundle"
and clarify what the output of "guix archive --export" really is.
* guix/nar.scm (restore-one-item, restore-file-set): Use the term "nar
bundle" in docstrings.
* gnu/services/web.scm: (<php-fpm-configuration>)[php-ini-file]: New record field.
(php-fpm-shepherd-service): Use it.
* doc/guix.texi (Web Services): Document it.
* gnu/services/mail.scm (%dovecot-activation): Link the location with multiple
plugins (dovecot-pigeonhole, etc), to a place where dovecot can find them.
* gnu/services/mail.scm (dovecot-configuration): Use the symlink.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
* doc/guix-cookbook.texi (Running Guix on a Linode Server):
I added a section that explains how to run guix on a linode server.
Thanks Chris Webber!
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Getting Started): New node.
(Binary Installation): Refer to it and to "Application Setup".
(After System Installation): Refer to "Getting Started".
(Features): Add introductory sentence.
* gnu/services/virtualization.scm (%hurd-vm-operating-system): Add
secret-service.
(hurd-vm-shepherd-service): Use it to install secrets.
* doc/guix.texi (The Hurd in a Virtual Machine): Document it.
In order to do so, default to an empty options list, and expose options whose
default values are sensitive directly as keyword arguments.
* guix/gexp.scm (computed-file): Extract the LOCAL-BUILD? parameter from the
OPTIONS parameter to make it a stand-alone keyword argument. Introduce an
OPTIONS* binding which is obtained by combining the LOCAL-BUILD? keyword and
its value with OPTIONS.
* doc/guix.texi (G-Expressions): Adjust doc.
Suggested-by: Ludovic Courtès <ludo@gnu.org>
* guix/scripts/system.scm (%options): Add `--label'.
(system-derivation-for-action): Take a #:label key to set volume ID.
(perform-action): Take a #:label key.
(%default-options): Add default label value.
(process-action): Pass label value from command-line to perform-action.
* gnu/system/image.scm (image-with-label): New procedure.
* doc/contributing.texi (Building from Git): Instruct the user to fetch
the 'keyring' branch. Fix a typo.
Signed-off-by: Leo Famulari <leo@famulari.name>
* guix/scripts/offload.scm (<build-machine>)[systems]: New field.
[system]: Accessor changed to %build-machine-system. Default to #f.
* guix/scripts/offload.scm (build-machine-system): Wrap %build-machine-system
with a deprecation warning.
(build-machine-systems): Access the new systems field or fallback to use
build-machine-system, for backward compatibility.
(machine-matches?): Adjust.
* tests/offload.scm: Add tests...
* Makefile.am (SCM_TESTS): ...and register them.
* doc/guix.texi (Daemon Offload Setup): Update doc.
* gnu/services/admin.scm (<unattended-upgrade-configuration>)[operating-system-file]:
New field.
(unattended-upgrade-mcron-jobs): Honor it.
* doc/guix.texi (Unattended Upgrades): Document it.
* Makefile.am (MODULES): Remove guix/zlib.scm and guix/lzlib.scm,
(SCM_TESTS): remove tests/zlib.scm, tests/lzlib.scm.
* build-aux/build-self.scm (make-config.scm): Remove unused %libz variable.
* configure.ac: Remove LIBZ and LIBLZ variables and check instead for
Guile-zlib and Guile-lzlib.
* doc/guix.texi ("Requirements"): Remove zlib requirement and add Guile-zlib
and Guile-lzlib instead.
* gnu/packages/package-management.scm (guix)[native-inputs]: Add "guile-zlib"
and "guile-lzlib",
[inputs]: remove "zlib" and "lzlib",
[propagated-inputs]: ditto,
[arguments]: add "guile-zlib" and "guile-lzlib" to Guile load path.
* guix/config.scm.in (%libz, %liblz): Remove them.
* guix/lzlib.scm: Remove it.
* guix/man-db.scm: Use (zlib) instead of (guix zlib).
* guix/profiles.scm (manual-database): Do not stub (guix config) in imported
modules list, instead add "guile-zlib" to the extension list.
* guix/scripts/publish.scm: Use (zlib) instead of (guix zlib) and (lzlib)
instead of (guix lzlib),
(string->compression-type, effective-compression): do not check for zlib and
lzlib availability.
* guix/scripts/substitute.scm (%compression-methods): Do not check for lzlib
availability.
* guix/self.scm (specification->package): Add "guile-zlib" and "guile-lzlib"
and remove "zlib" and "lzlib",
(compiled-guix): remove "zlib" and "lzlib" arguments and add guile-zlib and
guile-lzlib to the dependencies, also do not pass "zlib" and "lzlib" to
"make-config.scm" procedure,
(make-config.scm): remove "zlib" and "lzlib" arguments as well as %libz and
%liblz variables.
* guix/utils.scm (lzip-port): Use (lzlib) instead of (guix lzlib) and do not
check for lzlib availability.
* guix/zlib.scm: Remove it.
* m4/guix.m4 (GUIX_LIBZ_LIBDIR, GUIX_LIBLZ_FILE_NAME): Remove them.
* tests/lzlib.scm: Use (zlib) instead of (guix zlib) and (lzlib)
instead of (guix lzlib), and do not check for zlib and lzlib availability.
* tests/publish.scm: Ditto.
* tests/substitute.scm: Do not check for lzlib availability.
* tests/utils.scm: Ditto.
* tests/zlib.scm: Remove it.
* gnu/services/linux.scm (<zram-device-configuration>): New record.
(zram-device-service-type): New variable.
* doc/guix.texi (Linux Services): Document it.
* tests/services/linux.scm (zram-swap-device-test): New tests.
* doc/guix.texi (Database Services): Add example of shell commands to use psql
as system user. Also add troubleshooting tip when service fails to start
because of incompatible cluster.
* doc/guix.texi (Writing Channel News): Explain the issue with using the .scm
extension and possible workarounds; fix the example to use the .txt extension instead.
* gnu/services/admin.scm (<unattended-upgrade-configuration>): New
record type.
(%unattended-upgrade-log-file): New variable.
(unattended-upgrade-mcron-jobs, unattended-upgrade-log-rotations): New
procedures.
(unattended-upgrade-service-type): New variable.
* doc/guix.texi (Service Reference): Add 'provenance-service-type' anchor.
(Unattended Upgrades): New section.
This is a followup to 8e31736b0a.
* guix/scripts/system/reconfigure.scm (check-forward-update): Add
#:current-channels. Use it instead of OLD.
* gnu/services.scm (sexp->system-provenance): New procedure.
(system-provenance): Use it.
* gnu/machine/ssh.scm (<machine-ssh-configuration>)[allow-downgrades?]:
New field.
(machine-check-forward-update): New procedure.
(check-deployment-sanity)[assertions]: Call it.
* doc/guix.texi (Invoking guix deploy): Document 'allow-downgrades?'
field.
* gnu/services/nix.scm (<nix-configuration>)[extra-options]: New field.
(nix-shepherd-service): Add this.
(nix-activation): Add new line to the end of /etc/nix/nix.conf file.
* doc/guix.texi (Miscellaneous Services)[Nix service]: Document this.
Reported by Pierre Neidhardt <mail@ambrevar.xyz>.
* doc/guix.texi (Channels): Mention the keyring branch and the
'keyring-reference' bit in '.guix-channel'.
This is similar to what 9744cc7b46 did for
'guix pull'.
* guix/scripts/system/reconfigure.scm (ensure-forward-reconfigure)
(warn-about-backward-reconfigure, channel-relations)
(check-forward-update): New procedures.
* guix/scripts/system.scm (perform-action): Add #:validate-reconfigure.
Call 'check-forward-update' when ACTION is 'reconfigure.
(%options, show-help): Add "--allow-downgrades".
(%default-options): Add 'validate-reconfigure' key.
(process-action): Pass #:validate-reconfigure to 'perform-action'.
* doc/guix.texi (Invoking guix system): Document 'guix system describe'
more prominently, and document '--allow-downgrades'.
* gnu/services/ganeti.scm (<ganeti-rapi-configuration>): Set SSL? to #t.
* gnu/tests/ganeti.scm (%ganeti-os): Set SSL? to #f.
* doc/guix.texi (Virtualization Services): Adjust accordingly.
This allows compiling the module without the (gnu packages maven) module being
available.
* guix/build-system/maven.scm (%default-maven-plugins): Rename to
default-maven-plugins, and convert to a procedure.
* doc/guix.texi (maven-build-system): Update.
* gnu/services/networking.scm (<wpa-supplicant-configuration>)[requirement]:
New parameter.
(wpa-supplicant-shepherd-service): Use it instead of hard-coded list.
* doc/guix.texi (Networking Services): Document accordingly.
Suggested by Ricardo Wurmus and Simon Tournier.
* guix/channels.scm (sexp->channel-introduction): New procedure.
(read-channel-metadata): Use it.
(profile-channels)[sexp->channel-introduction]: Remove.
* tests/channels.scm ("latest-channel-instances, authenticate dependency"):
New test.
* doc/guix.texi (Channels)[Declaring Channel Dependencies]: Augment example.
* guix/channels.scm (<channel-introduction>): Rename constructor to
'%make-channel-introduction'.
(make-channel-introduction): New procedure.
* tests/channels.scm ("authenticate-channel, wrong first commit signer")
("authenticate-channel, .guix-authorizations"): Use
'make-channel-introduction' without '@@' and without third argument.
* doc/guix.texi (Channels)[Channel Authentication, Specifying Channel
Authorizations]: New subsections.
* gnu/services/science.scm: New file.
(<rshiny-configuration>): New record.
(rshiny-shepherd-service-type): New variable.
* doc/guix.texi (Miscellaneous Services): Document it.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add it.
* gnu/services/virtualization.scm (<hurd-vm-configuration>)[options]: Remove
"--hda" option.
[id,net-options]: New fields.
(hurd-vm-net-options): New procedure. Parameterize port forwarding with ID.
* gnu/services/virtualization.scm (hurd-vm-shepherd-service): Use them.
Parameterize provision with ID, if set. Hardcode "--hda" option for image.
* doc/guix.texi (Virtualization Services): Document new fields. Update for
hardcoding of "--hda".
* doc/guix.texi (Invoking guix pull): Delete a paragraph about the --verbose
option, which was removed in 1edcfda81b.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* guix/channels.scm (<channel-metadata>)[url]: New field.
(read-channel-metadata): Initialize it.
(read-channel-metadata-from-source): Likewise.
(channel-instance-primary-url): New procedure.
(latest-channel-instances): Compare CHANNEL's URL against it.
* doc/guix.texi (Channels)[Primary URL]: New subsection.
Fixes <https://bugs.gnu.org/22883>.
* guix/channels.scm (<channel>)[introduction]: New field.
(<channel-introduction>): New record type.
(%guix-channel-introduction): New variable.
(%default-channels): Use it.
(<channel-metadata>)[keyring-reference]: New field.
(%default-keyring-reference): New variable.
(read-channel-metadata, read-channel-metadata-from-source): Initialize
the 'keyring-reference' field.
(commit-short-id, verify-introductory-commit)
(authenticate-channel): New procedures.
(latest-channel-instance): Call 'authenticate-channel' when CHANNEL has
an introduction.
* tests/channels.scm (gpg+git-available?, commit-id-string): New
procedures.
("authenticate-channel, wrong first commit signer"):
("authenticate-channel, .guix-authorizations"): New tests.
* doc/guix.texi (Invoking guix pull): Mention authentication.
Suggested by Maxim Cournoyer via IRC.
* doc/guix.texi (The Hurd in a Virtual Machine): Explicitly mention that
hurd-vm and childhurd are two names for this service.
The amount of packages has more than tripled since this section was written.
Adjust the rebuild limits and cycle lengths based on current practices.
* doc/contributing.texi (Submitting Patches): Increase 'staging' rebuild limit
to 1800 packages, and adjust the cycle to six weeks. Increase 'core-updates'
cycle to six months.
* gnu/services/virtualization.scm (hurd-vm-shepherd-service,
hurd-vm-disk-image): New procedures.
(%hurd-vm-operating-system, hurd-vm-service-type): New variables.
(<hurd-vm-configuration>): New record type.
* doc/guix.texi (Virtualization Services): Document it.
* gnu/services/shepherd.scm (scm->go): Use let-system, remove FIXME. Fixes
fixes cross-building of shepherd modules for the Hurd image.
* gnu/services/hurd.scm (<hurd-gettty-configuration>): New record.
(hurd-ttys-shepherd-service): New procedure.
(hurd-getty-service-type): New variable.
* doc/guix.texi (Hurd Services): Document it.
* gnu/services/docker.scm (docker-configuration): Add a debug? field.
(containerd-shepherd-service): Pass the "--log-level=debug" argument when
DEBUG? is true.
(docker-shepherd-service): Pass the "--debug" and "--log-level=debug"
arguments when DEBUG? is true.
* doc/guix.texi (Miscellaneous Services): Update doc.
* gnu/services/nfs.scm (<nfs-configuration>)[nfsd-tcp?, nfsd-udp?]: New
fields.
(nfs-shepherd-services)[rpc.nfsd]: Populate the --{no-,}tcp and --{no-,}udp
command line options based on the values of the nfsd-tcp? and nfsd-upd?
fields.
* doc/guix.texi (Network File System): Add doc.
It's been a good run, but no one is maintaining the architecture.
So long, and thanks for all the fish.
* doc/guix.texi (GNU Distribution): Change text for mips64el-linux
to denote it is deprecated.
(Daemon Offload Setup): Change occurrences of mips64el-linux to
aarch64-linux and adjust local code snippets.
(Guix Environment)[cross-compilation]: Change mips64el-linux-gnu to
aarch64-linux-gnu.
(GNU Build System)(package-cross-derivation]: Same.
(G-Expressions)[cross compilation]: Same.
(Additional Build Options)[cross-compilation, build logs]: Same.
(qemu-binfmt-service-type): Remove mips64el.
* doc/contributing.texi (Submitting Patches): Same.
* m4/guix.m4: (GUIX_ASSERT_SUPPORTED_SYSTEM): Remove mips64el-linux.
Some users are confused that these URLs and file names don't work, so
change them to the most popular architecture, while still mentioning
alternatives.
* doc/guix.texi (USB Stick and DVD Installation, Binary Installation): Use
x86_64-linux URLs by default.
This is a follow-up commit to 9cdb10d52e:
gnu: grub: Allow a PNG image and replace "aspect-ratio" with "resolution".
* doc/guix.texi (Bootloader Configuration): Describe and use the 'grub-theme'
procedure instead of the removed '%default-theme' variable.
* doc/images/gcc-core-mesboot0-graph.dot: New image, replacing
* doc/images/gcc-mesboot0-bag-graph.dot: ... remove file.
* doc/local.mk (DOT_FILES): Update for new image file.
* doc/guix.texi (Reduced Binary Seed Bootstrap): Use it in updated description
of further reduction of the trusted computing base.
These two words have different meanings and we really meant
"alternatively" here.
* doc/guix.texi (System Installation):
(Preparing for Installation):
(Invoking guix refresh):
(Invoking guix challenge):
(Networking Services): "Alternatively", not "Alternately".
* gnu/bootloader/grub.scm (strip-mount-point): Remove procedure.
(normalize-file): Add procedure.
(grub-configuration-file): New BTRFS-SUBVOLUME-FILE-NAME parameter. When
defined, prepend its value to the kernel and initrd file names, using the
NORMALIZE-FILE procedure. Adjust the call to EYE-CANDY to pass the
BTRFS-SUBVOLUME-FILE-NAME argument. Normalize the KEYMAP file as well.
(eye-candy): Add a BTRFS-SUBVOLUME-FILE-NAME parameter, and use it, along with
the NORMALIZE-FILE procedure, to normalize the FONT-FILE and IMAGE nested
variables. Adjust doc.
* gnu/bootloader/depthcharge.scm (depthcharge-configuration-file): Adapt.
* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Likewise.
* gnu/system/file-systems.scm (btrfs-subvolume?)
(btrfs-store-subvolume-file-name): New procedures.
* gnu/system.scm (operating-system-bootcfg): Specify the Btrfs
subvolume file name the store resides on to the
`operating-system-bootcfg' procedure, using the new
BTRFS-SUBVOLUME-FILE-NAME argument.
* doc/guix.texi (File Systems): Add a Btrfs subsection to document the use of
subvolumes.
* gnu/tests/install.scm (%btrfs-root-on-subvolume-os)
(%btrfs-root-on-subvolume-os-source)
(%btrfs-root-on-subvolume-installation-script)
(%test-btrfs-root-on-subvolume-os): New variables.
The --root option can now be omitted, and inferred from the root file system
declaration instead.
* gnu/build/file-systems.scm (canonicalize-device-spec): Extend to support NFS
directly, and...
* gnu/build/linux-boot.scm (boot-system): ...remove NFS special casing from
here. Remove nested definitions for root-fs-type, root-fs-flags and
root-fs-options, and bind those inside the let* instead. Make "--root" take
precedence over the device field string representation of the root file
system.
* doc/guix.texi (Initial RAM Disk): Document that "--root" can be left
unspecified.
* etc/gnu-store.mount.in: New file.
* nix/local.mk (nodist_systemdservice_DATA): Add it.
(etc/%.mount): New rule for it.
* etc/guix-install.sh (sys_enable_guix_daemon): Install it.
* doc/guix.texi (Binary Installation): Document it.
* .gitignore: Ignore changes to it.
* guix/gexp.scm (<system-binding>): New record type.
(let-system): New macro.
(system-binding-compiler): New procedure.
(default-expander): Add 'self-quoting?' case.
(self-quoting?): New procedure.
(lower-inputs): Add 'filterm'. Pass the result of
'mapm/accumulate-builds' through FILTERM.
(gexp->sexp)[self-quoting?]: Remove.
* tests/gexp.scm ("let-system", "let-system, target")
("let-system, ungexp-native, target")
("let-system, nested"): New tests.
* doc/guix.texi (G-Expressions): Document it.
* gnu/packages/aux-files/run-in-namespace.c (HAVE_EXEC_WITH_LOADER): New
macro.
(bind_mount): Rename to...
(mirror_directory): ... this. Add 'firmlink' argument and use it
instead of calling mkdir/open/close/mount directly.
(bind_mount, make_symlink): New functions.
(exec_in_user_namespace): Adjust accordingly.
(exec_with_loader) [HAVE_EXEC_WITH_LOADER]: New function.
(exec_performance): New function.
(engines): Add them.
* guix/scripts/pack.scm (wrapped-package)[fakechroot-library]
[audit-module]: New procedures.
[audit-source]: New variable.
[build](elf-interpreter, elf-loader-compile-flags): New procedures.
(build-wrapper): Use them.
* tests/guix-pack-relocatable.sh: Test with
'GUIX_EXECUTION_ENGINE=fakechroot'.
* doc/guix.texi (Invoking guix pack): Document the 'performance' and
'fakechroot' engines.
* gnu/packages/aux-files/pack-audit.c: New file.
* Makefile.am (AUX_FILES): Add it.
* gnu/packages/aux-files/run-in-namespace.c (struct engine): New type.
(exec_default): New function.
(engines): New variable.
(execution_engine): New function.
(main): Use it instead of calling 'exec_in_user_namespace' and
'exec_with_proot' directly.
* tests/guix-pack-relocatable.sh: Add test with 'GUIX_EXECUTION_ENGINE'.
* doc/guix.texi (Invoking guix pack): Document 'GUIX_EXECUTION_ENGINE'.
* doc/guix.texi (Invoking guix graph): Mention xdot. Remove a couple of
"| dot -Tpdf" in examples and add "| xdot".
(Invoking guix system): Likewise.
(Preparing to Use the Bootstrap Binaries): Likewise.
* gnu/system/vm.scm (system-docker-image): Add #:shared-network? and
pass it to 'containerized-operating-system'.
(qemu-image):
* guix/scripts/system.scm (system-derivation-for-action): Pass
#:shared-network? to 'system-docker-image'.
* doc/guix.texi (Invoking guix system): Document it.
* doc/guix.texi (Invoking `guix environment'): Add paragraph and example to
run Eolie in a guix environment container. Add `container' cindex for the
first container example, and the `certificates' cindex for the web browser
example.
Suggested by Bruno Haible <bruno@clisp.org>
in <https://bugs.gnu.org/41038>.
* doc/guix.texi (Packages for C Development): New node.
(Application Setup)[The GCC toolchain]: Empty and refer to it.
Fixes <https://debbugs.gnu.org/cgi/bugreport.cgi?bug=40803>.
Reported by "operator.name" <operator.name@protonmail.com>.
* doc/build.scm (%languages): Add smaller list for the cookbook.
(syntax-highlighted-html): Adapt regexp for mono-node files to include
the cookbook.
Introduce a new `addresses' field that translates to passing `--address='
multiple times to dnsmasq.
* gnu/services/dns.scm (<dnsmasq-configuration>): Add an addresses field.
(dnsmasq-shepherd-service): Match the addresses field and translate it to
multiple '--address=' flags.
* doc/guix.texi (DNS Services): Document it.
Signed-off-by: 宋文武 <iyzsong@member.fsf.org>
This is a follow-up to commit 57833803b4.
* doc/guix.texi (Initial RAM Disk): Refer to "%guile-3.0-static-stripped"
instead of "%guile-static-stripped".
* doc/guix.texi (Dictionary Service): Renamed to singular and changed
from 'subsubsection' to 'subheading'.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
This avoids a race with the bcm5974 kernel module.
Fixes <https://bugs.gnu.org/35574>.
* gnu/system.scm (%default-modprobe-blacklist): New variable.
(<operating-system>)[kernel-arguments]: Default to ...
(%default-kernel-arguments): ... this new variable.
* doc/guix.texi (operating-system Reference): Document the change.
* doc/guix-cookbook.texi (@samp{GUIX_PACKAGE_PATH}):
(Extended example):
(Setting up a bind mount):
(Basic setup with manifests):
(Default profile): Use @file instead of @samp or @code for file names and
extensions.
* doc/guix-cookbook.texi (Extended example):
(StumpWM):
(Basic setup with manifests): Prevent Texinfo from ending a sentence where it
should not.
(Setting up a bind mount): Add two spaces where needed.
* gnu/packages/fonts.scm (font-gnu-freefont): Add otf and woff font types.
* gnu/packages/genealogy.scm (gramps)[inputs]: Replace font-gnu-freefont-tff
with font-gnu-freefont.
* doc/guix.texi: Adjust a reference to the package.
Signed-off-by: Leo Famulari <leo@famulari.name>
* guix/gexp.scm (<scheme-file>)[load-path?]: New field.
(scheme-file): Add #:set-load-path? and honor it.
(scheme-file-compiler): Pass #:set-load-path? to 'gexp->file'.
* doc/guix.texi (G-Expressions): Document it.
* gnu/services/networking.scm (simulated-wifi-shepherd-services): New
procedure.
(simulated-wifi-service-type): New variable.
* doc/guix.texi (Networking Services): Document it.
* gnu/services/networking.scm (<hostapd-configuration>): New record
type.
(hostapd-configuration-file, hostapd-shepherd-services): New
procedures.
(hostapd-service-type): New variable.
* doc/guix.texi (Networking Services): Document it.
Suggested by Steven vanZyl <rushsteve1@rushsteve1.us>.
* doc/guix.texi (Binary Installation): Add @example showing how to
download the script. Use "systemctl enable --now".
This fixes a bug introduced in 362bcdb1b0
whereby the VM image would no longer contain /etc/config.scm, contrary
to what the manual says.
Reported by dbdude on #guix.
* Makefile.am (release): Pass '--save-provenance' to 'guix system
vm-image'.
* doc/guix.texi (Running Guix in a VM): Adjust file name accordingly.
@var is for meta-syntactic variables but it is used in some places for
mere variables, which is incorrect and leads to inconsistent layout in
PDF and HTML.
* doc/guix.texi (package Reference, The Store Monad)
(G-Expressions, operating-system Reference)
(File Systems, Base Services, Log Rotation)
(Networking Services, Invoking guix deploy): Replace incorrect uses of
@var with @code.
This allows us to catch "operating_002dsystem-1", for instance.
* doc/build.scm (syntax-highlighted-html)[build](anchor-id->key): Drop
"-1" & co. from ID.
This is a followup to da9deba13d.
Last-minute modification of the 'match' pattern would lead to an error:
"multiple ellipsis patterns not allowed at same level"
* doc/build.scm (syntax-highlighted-html)[build](collect-anchors):
Add 'worthy-entry?' procedure and use it instead of the unsupported
pattern for ('dt ...).
