In addition to substitutes from ci.guix.gnu.org. There are more changes that
can be made in the future, but these changes seem like a good start.
* config-daemon.ac (guix_substitute_urls): Add https://bordeaux.guix.gnu.org.
* guix/scripts/substitute.scm (%default-substitute-urls): Add
http://bordeaux.guix.gnu.org.
* guix/store.scm (%default-substitute-urls): Add bordeaux.guix.gnu.org.
* doc/guix.texi: Adjust accordingly.
* doc/contributing.texi: Adjust accordingly.
* doc/guix.texi (Globally-Visible Packages): Change "bind" variable
name to the actual variable name, "isc-bind".
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* doc/guix.texi (Networking Services): Allow established and related incoming
connections in example iptables configuration.
Signed-off-by: Arun Isaac <arunisaac@systemreboot.net>
* gnu/tests/linux-modules.scm
(run-loadable-kernel-modules-service-test): Actually load the modules
with kernel-module-loader-service-type. Use a singleton service instead
of defining a custom one.
* doc/guix.texi (Service Reference): To give an example of
linux-loadable-module-service-type use a singleton instead of defining a
new service.
Fixes <https://issues.guix.gnu.org/48739>. It may seem silly, but when not
realizing this firsthand, it can be quite surprising and thus not obvious to
troubleshoot. Thanks to Eric Brown for their insightful comments on the
tracker.
* doc/guix.texi (Running Guix in a VM): Add a note that networking support
must be available in the Guix System operating system declaration used for the
VM.
Reported by munksgaard on #guix.
* doc/guix.texi (Invoking guix pack): Replace "geiser" with
"emacs-geiser" in examples.
(Invoking guix refresh): Likewise.
* gnu/services/networking.scm (maybe-number?, maybe-string?): New procedures.
(<opendht-configuration>): New configuration record.
(%opendht-accounts): New variable.
(opendht-configuration->command-line-arguments): New procedure.
(opendht-shepherd-service, opendht-service-type): New variables.
* doc/guix.texi (Networking Services): Document the new service.
Also replace the obsolete 'guix system vm-image' command mention by the 'guix
system image'.
* doc/guix.texi (Running Guix in a VM): Remove VM image decompression
instruction.
<guix system vm-image>: Replace by 'guix system image'.
* gnu/system.scm (operating-system-directory-base-entries): Remove code
to handle generation of "kernel" for linux-libre kernels.
(operating-system-default-essential-services): Instantiate
linux-builder-service-type.
(package-for-kernel): Move ...
* gnu/services.scm: ... to here.
(linux-builder-service-type): New variable.
(linux-builder-configuration): New type.
(linux-loadable-module-service-type): New variable.
* gnu/tests/linux-modules.scm (run-loadable-kernel-modules-test): Move
code to ...
(run-loadable-kernel-modules-test-base): ... new procedure here.
(run-loadable-kernel-modules-service-test): New procedure.
(%test-loadable-kernel-modules-service-0): New variable.
(%test-loadable-kernel-modules-service-1): New variable.
(%test-loadable-kernel-modules-service-2): New variable.
* doc/guix.texi: Document linux-loadable-module-service-type.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
* gnu/services/mail.scm (protocol-configuration): Add an ‘imap-metadata?’
setting to enable IMAP METADATA support in the ‘imap’ protocol.
* doc/guix.texi (Mail Services): Document it.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
Regression introduced in 58805da44d.
* gnu/packages/linux.scm (rasdaemon)[description]: Avoid @acronym since
Guile's Texinfo module doesn't currently support @comma{}.
* doc/guix.texi (Linux Services): Use @comma{} within @acronym.
The qcow2 format supports compression, and the qcow2 type supported by 'guix
system image' produces compressed qcow2 images.
* Makefile.am (release): Do not re-compress the qcow2 VM images with xz.
* doc/guix.texi (Running Guix in a VM): Adjust VM image URL.
It was discussed on guix-devel that the manual only needs to have correct
instructions for the latest release.
* doc/guix.texi (OPENPGP-SIGNING-KEY-ID): Update to my public OpenPGP key.
(OPENPGP-SIGNING-KEY-URL): Adjust URL.
The upcoming 1.3.0 release will be signed with my OpenPGP key; subsequent
releases may also be.
* doc/guix.texi (OPENPGP-SIGNING-KEY-ID, OPENPGP-SIGNING-KEY-URL): Rename to...
(OPENPGP-SIGNING-KEY-ID-1, OPENPGP-SIGNING-KEY-URL-1): ... these,
respectively.
(OPENPGP-SIGNING-KEY-ID-2, OPENPGP-SIGNING-KEY-URL-2): New variables.
(Binary Installation): Adjust to cover for the new key.
(USB Stick and DVD Installation): Likewise.
(Invoking guix refresh): Adjust accordingly.
The xz-compressed image is 23% smaller than the original ISO image (with
built-in zlib compression), but the extra decompression step is
unconventional and often a hindrance for users. See discussion at
<https://lists.gnu.org/archive/html/guix-devel/2021-04/msg00497.html>.
* Makefile.am (release): Do not compress ISO images.
* doc/guix.texi (USB Stick and DVD Installation): Remove ".xz" suffix
from URL and file name.
(Copying to a USB Stick, Burning on a DVD): Remove introductory words,
@enumerate, and first item.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
This change is so that the list of translated Texinfo files remain in sync
with the list of supported (translated) languages.
* doc/local.mk (MANUAL_LANGUAGES, COOKBOOK_LANGUAGES): New variables.
(lang_to_texinfos): New function.
(TRANSLATED_INFO): Use it to construct the list of files.
Modified-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
The upcoming 1.3.0 release will be signed with my OpenPGP key; subsequent
releases may also be.
* doc/guix.texi (OPENPGP-SIGNING-KEY-ID, OPENPGP-SIGNING-KEY-URL): Rename to...
(OPENPGP-SIGNING-KEY-ID-1, OPENPGP-SIGNING-KEY-URL-1): ... these,
respectively.
(OPENPGP-SIGNING-KEY-ID-2, OPENPGP-SIGNING-KEY-URL-2): New variables.
(Binary Installation): Adjust to cover for the new key.
(USB Stick and DVD Installation): Likewise.
(Invoking guix refresh): Adjust accordingly.
This is a follow up to commit ebf5d77eab, which added the qcow2 file extension
to the VM image file name.
* doc/guix.texi (Running Guix in a VM): Update URL.
* gnu/services/databases.scm (mysql-configuration): Add extra-environment
(mysql-service): Use #:log-file and #:environment-variables
* doc/guix.texi: Document it.
Signed-off-by: Leo Prikler <leo.prikler@student.tugraz.at>
Adapting the snippet corresponding to the default value of the net-options
field of the hurd-vm-configuration record shown in the manual would easily
lead to a broken childhurd service, due to the presence of extraneous spaces
in the option string.
* doc/guix.texi (Virtualization Services)[hurd-vm-configuration]
<net-options>: Use string-append to properly form the option string.
This importer has suffered from bitrot and no longer works with current
Nix and Nixpkgs. See <https://bugs.gnu.org/32339> and
<https://bugs.gnu.org/36255>.
* guix/import/snix.scm, guix/scripts/import/nix.scm,
tests/snix.scm: Remove.
* Makefile.am (MODULES, SCM_TESTS): Remove them.
* guix/scripts/import.scm (importers): Remove "nix".
* build-aux/test-env.in: Remove NIXPKGS variable.
* configure.ac: Remove '--with-nixpkgs' option.
* doc/guix.texi (Invoking guix import): Remove bit about "guix import
nix".
* etc/completion/fish/guix.fish: Likewise.
