* gnu/services/base.scm (<greetd-configuration>)
[greeter-supplementary-groups]: New field.
(%greetd-accounts): Rename to...
(greetd-accounts): ... this. Convert to a function that takes a config
argument. Use greeter-supplementary-groups.
(greetd-service-type): Adjust accordingly.
* gnu/tests/desktop.scm (%minimal-services): Add test for
greeter-supplementary-groups.
* doc/guix.texi ("Base Services")[greetd-service-type]: Document
greeter-supplementary-groups.
* gnu/services/base.scm (greetd-service-type): New variable
* gnu/services/base.scm (greetd-configuration): New data type
* gnu/services/base.scm (greetd-terminal-configuration): New data type
* gnu/services/base.scm (greetd-agreety-session): New data type
* gnu/services/base.scm (pam-limits-service-type): Should be aware of
greetd PAM service
* gnu/services/pam-mount.scm (pam-mount-pam-service): Should be aware
of greetd PAM service
Signed-off-by: Lars-Dominik Braun <ldb@leibniz-psychology.org>
Fixes <https://issues.guix.gnu.org/55707>.
Previously Inetutils' syslogd would call 'fsync' after each line written
to a file. This would significantly increase boot times on machines
with slow-ish spinning HDDs, where each 'fsync' call would take between
0.1s and 0.4s (and we'd do two of them for each line, one for
/var/log/messages and one for /var/log/debug).
* gnu/services/base.scm (%default-syslog.conf): Add a '-' before each
file name, except /var/log/secure. Change what goes to /var/log/debug.
This is a followup to b06ecc5751,
211fe3f66e, and
fd57ce267c.
* gnu/services/base.scm (guix-publish-shepherd-service): Change 'stop'
method to use 'make-systemd-destructor' when 'make-systemd-constructor'
is used.
* gnu/services/dict.scm (dicod-shepherd-service): Change 'stop' method
to use 'make-inetd-destructor' when 'make-inetd-constructor' is used.
* gnu/services/messaging.scm (bitlbee-shepherd-service): Likewise.
* gnu/services/base.scm (<guix-configuration>)[generate-substitute-key?]:
New field.
(guix-activation): Honor it.
* doc/guix.texi (Base Services): Document it.
Fixes <https://issues.guix.gnu.org/47681>.
This change adjusts the location of the udev configuration file and rules
directory to a fixed location. Since udev relies on inotify to discover
change to its rules directory (/etc/udev/rules.d), by using a fixed directory
layout, new udev rules can be automatically picked up without restarting the
service.
* gnu/services/base.scm (udev-rules-union): Build rules output directly
in #$output.
(udev-shepherd-service)[start]: Adjust the UDEV_CONFIG_FILE and
EUDEV_RULES_DIRECTORY environment variables.
[actions]: Remove field. The 'rules' action is no longer useful.
(udev.conf): New variable.
(udev-etc): New procedure.
(udev-service-type): Extend the etc-service-type with it.
Previously, we would get a fishy 127.0.0.1/0 interface:
$ ip a show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 127.0.0.1/0 scope global lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
With this change, we get nothing but the "/8" version:
$ ip a show dev lo
1: lo: <LOOPBACK,MULTICAST,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope global lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
Reported by Yann Dupont <Yann.Dupont@univ-nantes.fr>.
* gnu/services/base.scm (assert-valid-address): Remove special cases for
127.0.0.1 and ::1.
(%loopback-static-networking): Add "/8".
This makes sure users do not mistakenly configuring a network with "/0"
as its netmask.
* gnu/services/base.scm (assert-valid-address): New procedure.
(<network-address>)[value]: Add it as 'sanitize'.
* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (%qemu-static-networking): New variable.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
* gnu/services/base.scm (static-networking-shepherd-service): Define
'set-up-via-ioctl', 'tear-down-via-ioctl', 'set-up-via-netlink',
'tear-down-via-netlink', and 'helpers' and use them in 'start' and
'stop'. Add (ip *) modules to 'modules'.
* gnu/services/base.scm (swap-service-type): Use default flags (0) if
SWAP is not a new-style <swap-space> record.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
Fixes <https://issues.guix.gnu.org/40158>.
* gnu/services/base.scm (file-system-shepherd-service): Update doc. Return a
shepherd service for the mount point when either MOUNT? or CREATE? is true.
[start]: Only mount when MOUNT? is true.
(file-system-shepherd-services): Also consider file systems with
create-mount-point? set to #t.
It's more explicit to specify used fields instead of depending on their
position.
* gnu/services/base.scm (guix-activation): Replace "match" with
"match-record".
This follows on from the changes in 4985a42724.
* gnu/services/base.scm (%default-authorized-guix-keys): Add
bordeaux.guix.gnu.org.pub.
Signed-off-by: Christopher Baines <mail@cbaines.net>
That way, the default config with (advertises? #t) and without a cache
will offer zstd-compressed substitutes, which should lead to much higher
throughput than gzip.
* gnu/services/base.scm (default-compression): When
'guix-publish-configuration-cache' returns true, use higher level
compression ratios. Add "zstd".
* doc/guix.texi (Base Services): Mention zstd.
References:
https://sysctl-explorer.net/fs/protected_hardlinks/https://sysctl-explorer.net/fs/protected_symlinks/
* gnu/services/sysctl.scm (%default-sysctl-settings): New public variable.
(<sysctl-configuration>): Use %default-sysctl-settings as the default value.
* gnu/services/base.scm (%base-services): Add sysctl-service-type.
* doc/guix.texi (Miscellaneous Services): Document the new defaults.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
