Earlier, the bind-rpc field of <laminar-configuration> was not used at
all. This was a bug.
* gnu/services/ci.scm (laminar-shepherd-service): Use bind-rpc to set
LAMINAR_BIND_RPC environment variable.
* gnu/services/xorg.scm (set-xorg-configuration)[login-manager-service-type]:
Use target-x86-64? from (guix utils) to decide if the system is an x86_64
system instead of comparing the strings ourselves.
Previously, we would get a fishy 127.0.0.1/0 interface:
$ ip a show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 127.0.0.1/0 scope global lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
With this change, we get nothing but the "/8" version:
$ ip a show dev lo
1: lo: <LOOPBACK,MULTICAST,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope global lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
Reported by Yann Dupont <Yann.Dupont@univ-nantes.fr>.
* gnu/services/base.scm (assert-valid-address): Remove special cases for
127.0.0.1 and ::1.
(%loopback-static-networking): Add "/8".
This is a follow-up to 49599fab56.
Fixes: <https://issues.guix.gnu.org/52908>.
* gnu/services/xorg.scm (set-xorg-configuration)[login-manager-service-type]:
When the current system or target system begins with the string "x86_64", use
gdm-service-type as before; otherwise, use sddm-service-type.
* gnu/system/examples/vm-image.tmpl (services): Add sddm-service-type to the
list of service types to remove.
Fixes: <https://issues.guix.gnu.org/32166>.
* gnu/services/desktop.scm (gnome-packages, gnome-udev-rules): New procedures.
(gnome-polkit-settings): Use the gnome-packages procedure.
(gnome-desktop-service-type): Add an udev service extension.
This avoids issues where the coordinator component dependencies (like sqitch
and guile-fibers) make it harder to use the agent.
* gnu/packages/package-management.scm (guix-build-coordinator/agent-only): New
variable.
* gnu/services/guix.scm (<guix-build-coordinator-agent-configuration>): Use
the guix-build-coordinator/agent-only package by default.
* doc/guix.texi (Guix Services): Update accordingly.
Fixes <https://issues.guix.gnu.org/issue/52051>.
* gnu/services/dbus.scm (dbus-configuration-directory): Set a 60 second
authentication timeout in the D-Bus configuration.
Until now the rsync service would export a single module, named
"files". This allows users to specify as many modules as they want, in
line with rsyncd.conf(5).
* gnu/services/rsync.scm (warn-share-field-deprecation): New procedure.
(<rsync-configuration>)[modules]: New field.
[share-path, share-comment, read-only?, timeout]: Mark as deprecated.
(<rsync-module>): New record type.
(%default-modules): New variable.
(rsync-configuration-modules): New procedure.
(rsync-activation): Create the directory of each module.
(rsync-config-file): Generate configuration for each module.
(rsync-service-type)[description]: New field.
* doc/guix.texi (Networking Services): Adjust documentation. Augment
example.
This makes sure users do not mistakenly configuring a network with "/0"
as its netmask.
* gnu/services/base.scm (assert-valid-address): New procedure.
(<network-address>)[value]: Add it as 'sanitize'.
* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (%qemu-static-networking): New variable.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
* gnu/services/virtualization.scm (secret-service-activation): Remove.
(secret-service-shepherd-services): New procedure.
(secret-service-type)[extensions]: Remove ACTIVATION-SERVICE-TYPE
extension. Add SHEPHERD-ROOT-SERVICE-TYPE and
USER-PROCESSES-SERVICE-TYPE extensions.
* gnu/build/secret-service.scm (delete-file*): New procedure.
(secret-service-receive-secrets): Use it.
* gnu/services/base.scm (static-networking-shepherd-service): Define
'set-up-via-ioctl', 'tear-down-via-ioctl', 'set-up-via-netlink',
'tear-down-via-netlink', and 'helpers' and use them in 'start' and
'stop'. Add (ip *) modules to 'modules'.
This works around the fact that Rust is currently unavailable in Guix on
platforms other than x86_64-linux:
https://lists.gnu.org/archive/html/guix-devel/2021-11/msg00197.html
* gnu/services/desktop.scm (desktop-services-for-system): New
procedure.
(%desktop-services): Turn into a macro.
* gnu/services/base.scm (swap-service-type): Use default flags (0) if
SWAP is not a new-style <swap-space> record.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
* gnu/services/docker.scm (docker-configuration): Add the field
(docker-shepherd-service): Pass the list of defined variables to
make-forkexec-constructor.
* doc/guix.texi (Miscellaneous Services): Update doc.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Fixes <https://issues.guix.gnu.org/51487>
* gnu/services/ssh.scm (extend-openssh-authorized-keys): ensure that no key is forgotten.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
Upstream raised these back in 2019 with CUPS 2.3.0.
* gnu/services/cups.scm (<cups-configuration>): Raise default
‘multiple-operation-timeout’ and ‘timeout’ from 300 to 900 seconds.
* doc/guix.texi (Printing Services): Adjust accordingly.
It is now silently ignored by knotd.
* gnu/services/dns.scm (<knot-zone-configuration>):
Remove DISABLE-ANY? field. Adjust all previous users.
* doc/guix.texi (DNS Services): Undocument it.
This prevents mutter from complaining that the /tmp/.X11-unix directory
misses the sticky bit when starting X Wayland.
* gnu/services/desktop.scm (x11-socket-directory-service): Add the sticky bit.
* gnu/packages/patches/gdm-wayland-session-wrapper-from-env.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add it.
* gnu/packages/gnome.scm (gdm): Use it.
* gnu/services/xorg.scm (<gdm-configuration>)[wayland-session]: New field.
(gdm-wayland-session-wrapper): New procedure.
(gdm-configuration-file): Point to this new procedure.
* doc/guix.texi (X Window): Update it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Add the optional flag `wayland?` in `gdm-configuration` to launch GDM with
Wayland, enabling the use of Wayland sessions with GDM.
* gnu/packages/patches/gdm-remove-hardcoded-xwayland-path.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add it.
* gnu/packages/gnome.scm (gdm): Use it.
* gnu/services/xorg.scm (<gdm-configuration>)[wayland?]: New field.
(gdm-configuration): Honor it.
(gdm-shepherd-service): Add the XCURSOR_PATH environment variable.
* doc/guix.texi (X Window): Document it
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Adapt to the postgresql default socket directory set to /var/run/postgresql.
* gnu/services/databases.scm (<postgresql-config-file>)[socket-directory]: Set
to /var/run/postgresql.
(<postgresql-role-configuration>): Ditto.
* gnu/tests/databases.scm (run-postgresql-test): Adapt it.
