These modules would use (guix grafts) just to access '%graft?' and
related bindings, which are now in (guix store).
* gnu/ci.scm,
guix/gexp.scm,
guix/lint.scm,
guix/scripts.scm,
guix/scripts/archive.scm,
guix/scripts/build.scm,
guix/scripts/challenge.scm,
guix/scripts/deploy.scm,
guix/scripts/environment.scm,
guix/scripts/home.scm,
guix/scripts/pack.scm,
guix/scripts/package.scm,
guix/scripts/pull.scm,
guix/scripts/size.scm,
guix/scripts/system.scm,
guix/scripts/weather.scm,
tests/builders.scm,
tests/channels.scm,
tests/cpan.scm,
tests/derivations.scm,
tests/gexp.scm,
tests/graph.scm,
tests/guix-daemon.sh,
tests/monads.scm,
tests/pack.scm,
tests/packages.scm,
tests/profiles.scm,
tests/system.scm: Remove #:use-module (guix grafts).
This is required since the introduction of the OpenSSL graft in the
parent commit so that calling 'package-derivation' in the Python tests
would not trigger a build.
* tests/builders.scm <top level>: Add '%graft?' call.
This is a followup to 09448c0994.
The 'check-build-failure' procedure would not actually check anything
since it did not call 'build-derivations'. However, it was throwing an
exception for unrelated reasons, so the tests would pass.
* tests/builders.scm (check-build-failure): Use 'guard' instead of
'false-if-exception'. Call 'build-derivations' to actually check for
build failures.
Add a new phase validating the usability of installed Python packages.
* gnu/packages/aux-files/python/sanity-check.py: New file.
* Makefile.am (AUX_FILES): Register it.
* guix/build-system/python.scm (sanity-check.py): New variable.
(lower): Add the script as an implicit input.
* guix/build/python-build-system.scm: Remove trailing #t.
(sanity-check): New phase.
(%standard-phases): Use it.
* tests/builders.scm: (make-python-dummy)
(dummy-ok, dummy-dummy-nosetuptools, dummy-fail-requirements)
(dummy-fail-import, dummy-fail-console-script): New variables.
("python-build-system: dummy-ok")
("python-build-system: dummy-dummy-nosetuptools")
("python-build-system: dummy-fail-requirements")
("python-build-system: dummy-fail-import")
("python-build-system: dummy-fail-console-script"): Add tests.
Before this change, only plain directories, tar or zip archives were supported
as the source of a package for the GNU build system; anything else would cause
the unpack phase to fail. Origins relying on snippets would suffer from the
same problem.
This change adds the support to use files of the following extensions: .gz,
.Z, .bz2, .lz, and .xz, even when they are not tarballs. Files of unknown
extensions are treated as uncompressed files and supported as well.
* guix/packages.scm (patch-and-repack): Only add the compressor utility to the
PATH when the file is compressed. Bind more inputs in the mlet, and use them
for decompressing single files. Adjust the decompression and compression
routines.
[decompression-type]: Remove nested variable.
* guix/build/utils.scm (compressor, tarball?): New procedures. Move
%xz-parallel-args to the new 'compression helpers' section.
* tests/packages.scm: Add tests. Add missing copyright year for Jan.
* guix/build/gnu-build-system.scm (first-subdirectory): Return #f when no
sub-directory was found.
(unpack): Support more file types, including uncompressed plain files.
This test had become too expensive since the introduction of the reduced
bootstrap.
* tests/builders.scm ("gnu-build"): Remove.
(%bootstrap-inputs, %bootstrap-search-paths): Remove.
Before that '.log' files for scheme tests were fragmented and not
included in test-suite.log. This unifies the semantics of SRFI-64 API
with Automake test suite.
* build-aux/test-driver.scm: New file.
* Makefile.am (SCM_LOG_DRIVER, AM_SCM_LOG_DRIVER_FLAGS): New variables.
(SCM_LOG_COMPILER, AM_SCM_LOG_FLAGS): Delete variables.
(AM_TESTS_ENVIRONMENT): Set GUILE_AUTO_COMPILE to 0.
* test-env.in: Silence guix-daemon.
* doc/guix.texi (Running the Test Suite): Describe how to display the
detailed results. Bug reports require only 'test-suite.log' file.
* tests/base32.scm, tests/build-utils.scm, tests/builders.scm,
tests/challenge.scm, tests/cpan.scm, tests/cpio.scm, tests/cran.scm,
tests/cve.scm, tests/derivations.scm, tests/elpa.scm,
tests/file-systems.scm, tests/gem.scm, tests/gexp.scm,
tests/gnu-maintenance.scm, tests/grafts.scm, tests/graph.scm,
tests/gremlin.scm, tests/hackage.scm, tests/hash.scm,
tests/import-utils.scm, tests/lint.scm, tests/monads.scm, tests/nar.scm,
tests/packages.scm, tests/pk-crypto.scm, tests/pki.scm,
tests/profiles.scm, tests/publish.scm, tests/pypi.scm,
tests/records.scm, tests/scripts-build.scm, tests/scripts.scm,
tests/services.scm, tests/sets.scm, tests/size.scm, tests/snix.scm,
tests/store.scm, tests/substitute.scm, tests/syscalls.scm,
tests/system.scm, tests/ui.scm, tests/union.scm, tests/upstream.scm,
tests/utils.scm: Don't exit at the end of test groups.
* tests/containers.scm: Likewise. Use 'test-skip' instead of exiting
with error code 77.
Reported by Daniel Kochmański <dkochmanski@hellsgate.pl>.
Fixes <http://bugs.gnu.org/19888>.
* guix/tests.scm (shebang-too-long?): New procedure.
* tests/builders.scm ("gnu-build"): Conditionalize on
not (shebang-too-long?).
* tests/packages.scm ("GNU Make, bootstrap"): Likewise.
* tests/guix-package.sh (shebang_not_too_long): New function.
Use it to determine whether to build 'gnu-make-boot0'.
* guix/tests.scm (network-reachable?): New procedure.
* tests/builders.scm (network-reachable?): Remove.
Replace references to it with calls to the new 'network-reachable?'
procedure.
* tests/derivations.scm (%coreutils): Use 'network-reachable?' instead
of 'getaddrinfo'.
* tests/packages.scm: Likewise.
* tests/union.scm: Likewise.
* guix/packages.scm (origin->derivation): Take body from
'package-source-derivation', and change it to monadic style. Expect
METHOD to a monadic procedure.
(package-source-derivation): Define in terms of 'origin->derivation'.
* guix/download.scm (url-fetch): Remove 'store' argument. Remove
'guile-for-build' variable. Turn into a monadic procedure.
* guix/git-download.scm (git-fetch): Likewise.
* guix/svn-download.scm (svn-fetch): Likewise.
* tests/builders.scm (url-fetch*): New procedure.
Change tests to call 'url-fetch*' instead of 'url-fetch'.
* tests/packages.scm ("package-source-derivation, snippet"): Remove
'store' parameter of 'fetch' and change it to use 'interned-file'
instead of 'add-to-store'.
* gnu/packages/bootstrap.scm (bootstrap-origin)[boot]: Remove 'store'
parameter.
* guix/build-system.scm (<build-system>)[build, cross-build]: Remove.
[lower]: New field.
(<bag>): New record type.
(make-bag): New procedure.
* guix/packages.scm (bag-transitive-inputs, bag-transitive-build-inputs,
bag-transitive-host-inputs, bag-transitive-target-inputs,
package->bag): New procedures.
(package-derivation): Use it; use the bag, apply its build procedure,
etc.
(package-cross-derivation): Likewise.
* gnu/packages/bootstrap.scm (raw-build, make-raw-bag): New procedure.
(%bootstrap-guile): Use them.
* guix/build-system/trivial.scm (lower): New procedure.
(trivial-build, trivial-cross-build): Remove 'source' parameter. Pass
INPUTS as is.
(trivial-build-system): Adjust accordingly.
* guix/build-system/gnu.scm (%store, inputs-search-paths,
standard-search-paths, expand-inputs, standard-inputs): Remove.
(gnu-lower): New procedure.
(gnu-build): Remove 'source' and #:implicit-inputs? parameters.
Remove 'implicit-inputs' and 'implicit-search-paths' variables. Get
the source from INPUT-DRVS.
(gnu-cross-build): Likewise.
(standard-cross-packages): Remove call to 'standard-packages'.
(standard-cross-inputs, standard-cross-search-paths): Remove.
(gnu-build-system): Remove 'build' and 'cross-build'; add 'lower'.
* guix/build-system/cmake.scm (lower): New procedure.
(cmake-build): Remove 'source' and #:cmake parameters. Use INPUTS and
SEARCH-PATHS as is. Get the source from INPUTS.
* guix/build-system/perl.scm: Likewise.
* guix/build-system/python.scm: Likewise.
* guix/build-system/ruby.scm: Likewise.
* gnu/packages/cross-base.scm (cross-gcc): Change "cross-linux-headers"
to "linux-headers".
(cross-libc)[xlinux-headers]: Pass #:implicit-cross-inputs? #f.
Likewise. In 'propagated-inputs', change "cross-linux-headers" to
"linux-headers".
* guix/git-download.scm (git-fetch): Use 'standard-packages' instead of
'standard-inputs'.
* tests/builders.scm ("gnu-build-system"): Remove use of
'build-system-builder'.
("gnu-build"): Remove 'source' and #:implicit-inputs? arguments to
'gnu-build'.
* tests/packages.scm ("search paths"): Adjust to new build system API.
("package-cross-derivation, no cross builder"): Likewise.
* doc/guix.texi (Build Systems): Add paragraph on bags.
* guix/download.scm (url-fetch): When URL is a string, if it's not a URI
or if it's a URI with 'file' or #f scheme, use 'add-to-store'.
* tests/builders.scm ("url-fetch, file", "url-fetch, file URI"): New
tests.
* guix/derivations.scm (derivation->output-path,
derivation->output-paths): New procedures.
(derivation-path->output-path): Use 'derivation->output-path'.
(derivation-path->output-paths): Use 'derivation->output-paths'.
(derivation): Accept 'derivation?' objects as inputs. Return a single
value.
(build-derivations): New procedure.
(compiled-modules): Use 'derivation->output-paths'.
(build-expression->derivation)[source-path]: Add case for when the
input matches 'derivation?'.
[prologue]: Accept 'derivation?' objects in INPUTS.
[mod-dir, go-dir]: Use 'derivation->output-path'.
* guix/download.scm (url-fetch): Adjust to the single-value return.
* guix/packages.scm (package-output): Use 'derivation->output-path'.
* guix/scripts/build.scm (guix-build): When the argument is
'derivation-path?', pass it through 'read-derivation'.
Use 'derivation-file-name' to print out the .drv file names, and to
register them. Use 'derivation->output-path' instead of
'derivation-path->output-path'.
* guix/scripts/package.scm (roll-back): Adjust to the single-value
return.
(guix-package): Use 'derivation->output-path'.
* guix/ui.scm (show-what-to-build): Adjust to deal with 'derivation?'
objects instead of .drv file names.
* gnu/system/grub.scm (grub-configuration-file): Use
'derivation->output-path' instead of 'derivation-path->output-path'.
* gnu/system/vm.scm (qemu-image, system-qemu-image): Likewise.
* tests/builders.scm, tests/derivations.scm, tests/packages.scm,
tests/store.scm, tests/union.scm: Adjust to the new calling
convention.
* doc/guix.texi (Defining Packages, The Store, Derivations): Adjust
accordingly.
Fixes a regression introduced in a18eda2.
Reported by Nikita Karetnikov <nikita@karetnikov.org>.
* tests/builders.scm (%bootstrap-search-paths): New variable.
("gnu-build"): Pass #:search-paths.
* tests/builders.scm (network-reachable?): New variable.
("url-fetch", "gnu-build"): Skip unless NETWORK-REACHABLE?.
* tests/derivations.scm (%coreutils): Check for network access.
("build-expression->derivation with one input"): Skip when %COREUTILS
is #f.
* tests/guix-package.sh: Skip installation of GNU Make when the network
is unreachable.
* tests/packages.scm ("GNU Make, bootstrap"): Likewise.
* tests/union.scm ("union-build"): Likewise.
* tests/builders.scm (%bootstrap-inputs): Use %BOOT0-INPUTS from the distro.
* tests/packages.scm (%bootstrap-inputs): Likewise.
* tests/derivations.scm (%coreutils): Alias for %BOOTSTRAP-COREUTILS&CO.
* tests/builders.scm (%bootstrap-inputs, %bootstrap-guile): New
variables.
("gnu-build"): Use them, by setting `#:implicit-inputs? #f' and `#:guile'.
* tests/packages.scm (%bootstrap-inputs, %bootstrap-guile): New
variables.
("trivial"): Pass `#:guile %bootstrap-guile'.
("GNU Hello"): Use `package-with-explicit-inputs' to use
%BOOTSTRAP-GUILE and %BOOTSTRAP-INPUTS.
* guix/store.scm (valid-path?): New procedure.
* tests/builders.scm ("http-fetch", "gnu-build"): Use it.
* tests/derivations.scm ("add-to-store, flat", "add-to-store,
recursive", "derivation with no inputs", "build derivation with 1
source", "build derivation with coreutils",
"build-expression->derivation with expression returning #f"):
Likewise.
* guix/derivations.scm (build-expression->derivation): Change to expect
INPUTS to have the form (NAME DRV-PATH SUB-DRV) or (NAME DRV-PATH),
instead of (NAME . DRV-PATH). Update callers accordingly.
* guix/gnu-build-system.scm, tests/builders.scm, tests/derivations.scm:
Update accordingly.
* guix/derivations.scm (build-expression->derivation): Add all of INPUTS
as inputs to the final derivation.
* guix/build/gnu-build-system.scm, guix/build/utils.scm,
guix/gnu-build-system.scm: New files.
* tests/builders.scm ("gnu-build"): New test.
* guix/derivations.scm (imported-modules): New procedure.
(build-expression->derivation): New keyword argument `modules'.
Use `imported-modules' when MODULES is non-empty, and pass it with
`-L' to GUILE.
* guix/build/http.scm, guix/http.scm, tests/builders.scm: New files.
