* gnu/services/science.scm: New file.
(<rshiny-configuration>): New record.
(rshiny-shepherd-service-type): New variable.
* doc/guix.texi (Miscellaneous Services): Document it.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add it.
* gnu/services/virtualization.scm (<hurd-vm-configuration>)[options]: Remove
"--hda" option.
[id,net-options]: New fields.
(hurd-vm-net-options): New procedure. Parameterize port forwarding with ID.
* gnu/services/virtualization.scm (hurd-vm-shepherd-service): Use them.
Parameterize provision with ID, if set. Hardcode "--hda" option for image.
* doc/guix.texi (Virtualization Services): Document new fields. Update for
hardcoding of "--hda".
* doc/guix.texi (Invoking guix pull): Delete a paragraph about the --verbose
option, which was removed in 1edcfda81b.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* guix/channels.scm (<channel-metadata>)[url]: New field.
(read-channel-metadata): Initialize it.
(read-channel-metadata-from-source): Likewise.
(channel-instance-primary-url): New procedure.
(latest-channel-instances): Compare CHANNEL's URL against it.
* doc/guix.texi (Channels)[Primary URL]: New subsection.
Fixes <https://bugs.gnu.org/22883>.
* guix/channels.scm (<channel>)[introduction]: New field.
(<channel-introduction>): New record type.
(%guix-channel-introduction): New variable.
(%default-channels): Use it.
(<channel-metadata>)[keyring-reference]: New field.
(%default-keyring-reference): New variable.
(read-channel-metadata, read-channel-metadata-from-source): Initialize
the 'keyring-reference' field.
(commit-short-id, verify-introductory-commit)
(authenticate-channel): New procedures.
(latest-channel-instance): Call 'authenticate-channel' when CHANNEL has
an introduction.
* tests/channels.scm (gpg+git-available?, commit-id-string): New
procedures.
("authenticate-channel, wrong first commit signer"):
("authenticate-channel, .guix-authorizations"): New tests.
* doc/guix.texi (Invoking guix pull): Mention authentication.
Suggested by Maxim Cournoyer via IRC.
* doc/guix.texi (The Hurd in a Virtual Machine): Explicitly mention that
hurd-vm and childhurd are two names for this service.
The amount of packages has more than tripled since this section was written.
Adjust the rebuild limits and cycle lengths based on current practices.
* doc/contributing.texi (Submitting Patches): Increase 'staging' rebuild limit
to 1800 packages, and adjust the cycle to six weeks. Increase 'core-updates'
cycle to six months.
* gnu/services/virtualization.scm (hurd-vm-shepherd-service,
hurd-vm-disk-image): New procedures.
(%hurd-vm-operating-system, hurd-vm-service-type): New variables.
(<hurd-vm-configuration>): New record type.
* doc/guix.texi (Virtualization Services): Document it.
* gnu/services/shepherd.scm (scm->go): Use let-system, remove FIXME. Fixes
fixes cross-building of shepherd modules for the Hurd image.
* gnu/services/hurd.scm (<hurd-gettty-configuration>): New record.
(hurd-ttys-shepherd-service): New procedure.
(hurd-getty-service-type): New variable.
* doc/guix.texi (Hurd Services): Document it.
* gnu/services/docker.scm (docker-configuration): Add a debug? field.
(containerd-shepherd-service): Pass the "--log-level=debug" argument when
DEBUG? is true.
(docker-shepherd-service): Pass the "--debug" and "--log-level=debug"
arguments when DEBUG? is true.
* doc/guix.texi (Miscellaneous Services): Update doc.
* gnu/services/nfs.scm (<nfs-configuration>)[nfsd-tcp?, nfsd-udp?]: New
fields.
(nfs-shepherd-services)[rpc.nfsd]: Populate the --{no-,}tcp and --{no-,}udp
command line options based on the values of the nfsd-tcp? and nfsd-upd?
fields.
* doc/guix.texi (Network File System): Add doc.
It's been a good run, but no one is maintaining the architecture.
So long, and thanks for all the fish.
* doc/guix.texi (GNU Distribution): Change text for mips64el-linux
to denote it is deprecated.
(Daemon Offload Setup): Change occurrences of mips64el-linux to
aarch64-linux and adjust local code snippets.
(Guix Environment)[cross-compilation]: Change mips64el-linux-gnu to
aarch64-linux-gnu.
(GNU Build System)(package-cross-derivation]: Same.
(G-Expressions)[cross compilation]: Same.
(Additional Build Options)[cross-compilation, build logs]: Same.
(qemu-binfmt-service-type): Remove mips64el.
* doc/contributing.texi (Submitting Patches): Same.
* m4/guix.m4: (GUIX_ASSERT_SUPPORTED_SYSTEM): Remove mips64el-linux.
Some users are confused that these URLs and file names don't work, so
change them to the most popular architecture, while still mentioning
alternatives.
* doc/guix.texi (USB Stick and DVD Installation, Binary Installation): Use
x86_64-linux URLs by default.
This is a follow-up commit to 9cdb10d52e34f7e8fa3b6238fe268646a4bbb877:
gnu: grub: Allow a PNG image and replace "aspect-ratio" with "resolution".
* doc/guix.texi (Bootloader Configuration): Describe and use the 'grub-theme'
procedure instead of the removed '%default-theme' variable.
* doc/images/gcc-core-mesboot0-graph.dot: New image, replacing
* doc/images/gcc-mesboot0-bag-graph.dot: ... remove file.
* doc/local.mk (DOT_FILES): Update for new image file.
* doc/guix.texi (Reduced Binary Seed Bootstrap): Use it in updated description
of further reduction of the trusted computing base.
These two words have different meanings and we really meant
"alternatively" here.
* doc/guix.texi (System Installation):
(Preparing for Installation):
(Invoking guix refresh):
(Invoking guix challenge):
(Networking Services): "Alternatively", not "Alternately".
* gnu/bootloader/grub.scm (strip-mount-point): Remove procedure.
(normalize-file): Add procedure.
(grub-configuration-file): New BTRFS-SUBVOLUME-FILE-NAME parameter. When
defined, prepend its value to the kernel and initrd file names, using the
NORMALIZE-FILE procedure. Adjust the call to EYE-CANDY to pass the
BTRFS-SUBVOLUME-FILE-NAME argument. Normalize the KEYMAP file as well.
(eye-candy): Add a BTRFS-SUBVOLUME-FILE-NAME parameter, and use it, along with
the NORMALIZE-FILE procedure, to normalize the FONT-FILE and IMAGE nested
variables. Adjust doc.
* gnu/bootloader/depthcharge.scm (depthcharge-configuration-file): Adapt.
* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Likewise.
* gnu/system/file-systems.scm (btrfs-subvolume?)
(btrfs-store-subvolume-file-name): New procedures.
* gnu/system.scm (operating-system-bootcfg): Specify the Btrfs
subvolume file name the store resides on to the
`operating-system-bootcfg' procedure, using the new
BTRFS-SUBVOLUME-FILE-NAME argument.
* doc/guix.texi (File Systems): Add a Btrfs subsection to document the use of
subvolumes.
* gnu/tests/install.scm (%btrfs-root-on-subvolume-os)
(%btrfs-root-on-subvolume-os-source)
(%btrfs-root-on-subvolume-installation-script)
(%test-btrfs-root-on-subvolume-os): New variables.
The --root option can now be omitted, and inferred from the root file system
declaration instead.
* gnu/build/file-systems.scm (canonicalize-device-spec): Extend to support NFS
directly, and...
* gnu/build/linux-boot.scm (boot-system): ...remove NFS special casing from
here. Remove nested definitions for root-fs-type, root-fs-flags and
root-fs-options, and bind those inside the let* instead. Make "--root" take
precedence over the device field string representation of the root file
system.
* doc/guix.texi (Initial RAM Disk): Document that "--root" can be left
unspecified.
* etc/gnu-store.mount.in: New file.
* nix/local.mk (nodist_systemdservice_DATA): Add it.
(etc/%.mount): New rule for it.
* etc/guix-install.sh (sys_enable_guix_daemon): Install it.
* doc/guix.texi (Binary Installation): Document it.
* .gitignore: Ignore changes to it.
* guix/gexp.scm (<system-binding>): New record type.
(let-system): New macro.
(system-binding-compiler): New procedure.
(default-expander): Add 'self-quoting?' case.
(self-quoting?): New procedure.
(lower-inputs): Add 'filterm'. Pass the result of
'mapm/accumulate-builds' through FILTERM.
(gexp->sexp)[self-quoting?]: Remove.
* tests/gexp.scm ("let-system", "let-system, target")
("let-system, ungexp-native, target")
("let-system, nested"): New tests.
* doc/guix.texi (G-Expressions): Document it.
* gnu/packages/aux-files/run-in-namespace.c (HAVE_EXEC_WITH_LOADER): New
macro.
(bind_mount): Rename to...
(mirror_directory): ... this. Add 'firmlink' argument and use it
instead of calling mkdir/open/close/mount directly.
(bind_mount, make_symlink): New functions.
(exec_in_user_namespace): Adjust accordingly.
(exec_with_loader) [HAVE_EXEC_WITH_LOADER]: New function.
(exec_performance): New function.
(engines): Add them.
* guix/scripts/pack.scm (wrapped-package)[fakechroot-library]
[audit-module]: New procedures.
[audit-source]: New variable.
[build](elf-interpreter, elf-loader-compile-flags): New procedures.
(build-wrapper): Use them.
* tests/guix-pack-relocatable.sh: Test with
'GUIX_EXECUTION_ENGINE=fakechroot'.
* doc/guix.texi (Invoking guix pack): Document the 'performance' and
'fakechroot' engines.
* gnu/packages/aux-files/pack-audit.c: New file.
* Makefile.am (AUX_FILES): Add it.
* gnu/packages/aux-files/run-in-namespace.c (struct engine): New type.
(exec_default): New function.
(engines): New variable.
(execution_engine): New function.
(main): Use it instead of calling 'exec_in_user_namespace' and
'exec_with_proot' directly.
* tests/guix-pack-relocatable.sh: Add test with 'GUIX_EXECUTION_ENGINE'.
* doc/guix.texi (Invoking guix pack): Document 'GUIX_EXECUTION_ENGINE'.
* doc/guix.texi (Invoking guix graph): Mention xdot. Remove a couple of
"| dot -Tpdf" in examples and add "| xdot".
(Invoking guix system): Likewise.
(Preparing to Use the Bootstrap Binaries): Likewise.
* gnu/system/vm.scm (system-docker-image): Add #:shared-network? and
pass it to 'containerized-operating-system'.
(qemu-image):
* guix/scripts/system.scm (system-derivation-for-action): Pass
#:shared-network? to 'system-docker-image'.
* doc/guix.texi (Invoking guix system): Document it.
* doc/guix.texi (Invoking `guix environment'): Add paragraph and example to
run Eolie in a guix environment container. Add `container' cindex for the
first container example, and the `certificates' cindex for the web browser
example.
Suggested by Bruno Haible <bruno@clisp.org>
in <https://bugs.gnu.org/41038>.
* doc/guix.texi (Packages for C Development): New node.
(Application Setup)[The GCC toolchain]: Empty and refer to it.
Fixes <https://debbugs.gnu.org/cgi/bugreport.cgi?bug=40803>.
Reported by "operator.name" <operator.name@protonmail.com>.
* doc/build.scm (%languages): Add smaller list for the cookbook.
(syntax-highlighted-html): Adapt regexp for mono-node files to include
the cookbook.
Introduce a new `addresses' field that translates to passing `--address='
multiple times to dnsmasq.
* gnu/services/dns.scm (<dnsmasq-configuration>): Add an addresses field.
(dnsmasq-shepherd-service): Match the addresses field and translate it to
multiple '--address=' flags.
* doc/guix.texi (DNS Services): Document it.
Signed-off-by: 宋文武 <iyzsong@member.fsf.org>
This is a follow-up to commit 57833803b4.
* doc/guix.texi (Initial RAM Disk): Refer to "%guile-3.0-static-stripped"
instead of "%guile-static-stripped".
* doc/guix.texi (Dictionary Service): Renamed to singular and changed
from 'subsubsection' to 'subheading'.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
This avoids a race with the bcm5974 kernel module.
Fixes <https://bugs.gnu.org/35574>.
* gnu/system.scm (%default-modprobe-blacklist): New variable.
(<operating-system>)[kernel-arguments]: Default to ...
(%default-kernel-arguments): ... this new variable.
* doc/guix.texi (operating-system Reference): Document the change.
* doc/guix-cookbook.texi (@samp{GUIX_PACKAGE_PATH}):
(Extended example):
(Setting up a bind mount):
(Basic setup with manifests):
(Default profile): Use @file instead of @samp or @code for file names and
extensions.
* doc/guix-cookbook.texi (Extended example):
(StumpWM):
(Basic setup with manifests): Prevent Texinfo from ending a sentence where it
should not.
(Setting up a bind mount): Add two spaces where needed.