guix/gnu/tests/telephony.scm

378 lines
16 KiB
Scheme
Raw Normal View History

;;; GNU Guix --- Functional package management for GNU
;;; Copyright © 2021, 2022 Maxim Cournoyer <maxim.cournoyer@gmail.com>.
;;;
;;; This file is part of GNU Guix.
;;;
;;; GNU Guix is free software; you can redistribute it and/or modify it
;;; under the terms of the GNU General Public License as published by
;;; the Free Software Foundation; either version 3 of the License, or (at
;;; your option) any later version.
;;;
;;; GNU Guix is distributed in the hope that it will be useful, but
;;; WITHOUT ANY WARRANTY; without even the implied warranty of
;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;;; GNU General Public License for more details.
;;;
;;; You should have received a copy of the GNU General Public License
;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>.
(define-module (gnu tests telephony)
#:use-module (gnu)
#:use-module (gnu packages)
#:use-module (gnu packages guile)
services: jami: Modernize to adjust to Shepherd 0.9+ changes. This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami' and 'jami-provisioning' system tests to pass again. In version 0.9.0, Shepherd constructors are now run concurrently, via cooperative scheduling (Guile Fibers). The Jami service previously relied on blocking sleeps while polling for D-Bus services to become ready after forking a process; this wouldn't work anymore since while blocking the service process wouldn't be given the chance to finish starting. The new reliance on Fibers in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant that it wouldn't work outside of Shepherd anymore. Finally, the 'start-service' Shepherd procedure used in the test suite would cause the Jami daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0). To fix/simplify these problems, this change does the following: 1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify things, such as avoiding the need to fork 'dbus-send' processes. 2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries' waiting syntax. 3. A 'dbus' package variant is used to adjust the session bus configuration, tailoring it for the use case at hand. 4. Avoid start-service in the tests, preferring 'jami-service-available?' for now. * gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes) (deserialize-item, serialize-boolean, dbus-dict->alist) (dbus-array->list, parse-account-ids, parse-account-details) (parse-contacts): Delete procedures. (%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group) (%send-dbus-debug): Delete parameters. (jami-service-running?): New procedure. (send-dbus/configuration-manager): Rename to... (call-configuration-manager-method): ... this. Turn METHOD into a positional argument. Turn ARGUMENTS into an optional argument. Invoke `call-dbus-method' instead of `send-dbus', adjusting callers accordingly. (get-account-ids, id->account-details, id->account-details) (id->volatile-account-details, username->id, add-account remove-account) (username->contacts, remove-contact, add-contact, set-account-details) (set-all-moderators, username->all-moderators?, username->moderators) (set-moderator): Adjust accordingly. (with-retries, send-dbus, dbus-available-services) (dbus-service-available?): Move to ... * gnu/build/dbus-service.scm: ... this new module. (send-dbus): Rewrite to use the Guile AC/D-Bus library. (%dbus-query-timeout, sleep*): New variables. (%current-dbus-connection): New parameter. (initialize-dbus-connection!, argument->signature-type) (call-dbus-method): New procedures. (dbus-available-services): Adjust accordingly. * gnu/local.mk (GNU_SYSTEM_MODULES): Register new module. * gnu/packages/glib.scm (dbus-for-jami): New variable. * gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to dbus-for-jami. (jami-dbus-session-activation): Write a D-Bus daemon configuration file at '/var/run/jami/session-local.conf'. (jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers as extensions. Adjust imported modules. Remove no longer used parameters. <jami-dbus-session>: Use a PID file, avoiding the need for the manual synchronization. <jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using 'jami-service-available?' instead of 'dbus-service-available?'. * gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use 'jami-service-available?' to determine if the service is started rather than the now problematic Shepherd's 'start-service'.
2022-05-30 03:46:35 +00:00
#:use-module (gnu packages guile-xyz)
#:use-module (gnu tests)
#:use-module (gnu system vm)
#:use-module (gnu services)
#:use-module (gnu services dbus)
#:use-module (gnu services networking)
#:use-module (gnu services ssh)
#:use-module (gnu services telephony)
#:use-module (guix gexp)
#:use-module (guix modules)
#:export (%test-jami
%test-jami-provisioning
%test-jami-provisioning-partial))
;;;
;;; Jami daemon.
;;;
(include "data/jami-dummy-account.dat") ;defines %jami-account-content-sexp
(define %dummy-jami-account-archive
;; A Jami account archive is a gzipped JSON file.
(computed-file
"dummy-jami-account.gz"
(with-extensions (list guile-json-4 guile-zlib)
#~(begin
(use-modules (json) (zlib))
(let ((port (open-output-file #$output)))
(call-with-gzip-output-port port
(lambda (port)
(scm->json '#$%jami-account-content-sexp port))))))))
(define %allowed-contacts '("1dbcb0f5f37324228235564b79f2b9737e9a008f"
"2dbcb0f5f37324228235564b79f2b9737e9a008f"))
(define %moderators '("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"
"bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"))
(define %dummy-jami-account (jami-account
(archive %dummy-jami-account-archive)
(allowed-contacts %allowed-contacts)
(moderators %moderators)
(rendezvous-point? #t)
(peer-discovery? #f)
(bootstrap-hostnames '("bootstrap.me"
"fallback.another.host"))
(name-server-uri "https://my.name.server")))
;;; Like %dummy-jami-account, but with allowed-contacts and moderators left
;;; unset (thus taking the value *unspecified*).
(define %dummy-jami-account-partial
(jami-account
(archive %dummy-jami-account-archive)
(rendezvous-point? #t)
(peer-discovery? #f)
(bootstrap-hostnames '("bootstrap.me"
"fallback.another.host"))
(name-server-uri "https://my.name.server")))
(define* (make-jami-os #:key provisioning? partial?)
(operating-system
(host-name "jami")
(timezone "America/Montreal")
(locale "en_US.UTF-8")
(bootloader (bootloader-configuration
(bootloader grub-bootloader)
(targets '("/dev/sdX"))))
(file-systems (cons (file-system
(device (file-system-label "my-root"))
(mount-point "/")
(type "ext4"))
%base-file-systems))
(firmware '())
(services (cons* (service jami-service-type
(if provisioning?
(jami-configuration
(debug? #t)
(accounts
(list (if partial?
%dummy-jami-account-partial
%dummy-jami-account))))
(jami-configuration
(debug? #t))))
(service dbus-root-service-type)
;; The following services/packages are added for
;; debugging purposes.
(service dhcp-client-service-type)
(service openssh-service-type
(openssh-configuration
(permit-root-login #t)
(allow-empty-passwords? #t)))
%base-services))
(packages (cons* (specification->package "recutils")
(specification->package "strace")
%base-packages))))
(define %jami-os
(make-jami-os))
(define %jami-os-provisioning
(make-jami-os #:provisioning? #t))
(define %jami-os-provisioning-partial
(make-jami-os #:provisioning? #t #:partial? #t))
(define* (run-jami-test #:key provisioning? partial?)
"Run tests in %JAMI-OS. When PROVISIONING? is true, test the accounts
provisioning feature of the service. When PARTIAL? is #t, some fields of the
jami account used as part of the jami configuration are left *unspecified*."
(define os (marionette-operating-system
(if provisioning?
(if partial?
%jami-os-provisioning-partial
%jami-os-provisioning)
%jami-os)
#:imported-modules '((gnu services herd)
(guix combinators))))
(define vm (virtual-machine
(operating-system os)
(memory-size 512)))
(define username (assoc-ref %jami-account-content-sexp
"Account.username"))
(define test
services: jami: Modernize to adjust to Shepherd 0.9+ changes. This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami' and 'jami-provisioning' system tests to pass again. In version 0.9.0, Shepherd constructors are now run concurrently, via cooperative scheduling (Guile Fibers). The Jami service previously relied on blocking sleeps while polling for D-Bus services to become ready after forking a process; this wouldn't work anymore since while blocking the service process wouldn't be given the chance to finish starting. The new reliance on Fibers in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant that it wouldn't work outside of Shepherd anymore. Finally, the 'start-service' Shepherd procedure used in the test suite would cause the Jami daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0). To fix/simplify these problems, this change does the following: 1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify things, such as avoiding the need to fork 'dbus-send' processes. 2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries' waiting syntax. 3. A 'dbus' package variant is used to adjust the session bus configuration, tailoring it for the use case at hand. 4. Avoid start-service in the tests, preferring 'jami-service-available?' for now. * gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes) (deserialize-item, serialize-boolean, dbus-dict->alist) (dbus-array->list, parse-account-ids, parse-account-details) (parse-contacts): Delete procedures. (%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group) (%send-dbus-debug): Delete parameters. (jami-service-running?): New procedure. (send-dbus/configuration-manager): Rename to... (call-configuration-manager-method): ... this. Turn METHOD into a positional argument. Turn ARGUMENTS into an optional argument. Invoke `call-dbus-method' instead of `send-dbus', adjusting callers accordingly. (get-account-ids, id->account-details, id->account-details) (id->volatile-account-details, username->id, add-account remove-account) (username->contacts, remove-contact, add-contact, set-account-details) (set-all-moderators, username->all-moderators?, username->moderators) (set-moderator): Adjust accordingly. (with-retries, send-dbus, dbus-available-services) (dbus-service-available?): Move to ... * gnu/build/dbus-service.scm: ... this new module. (send-dbus): Rewrite to use the Guile AC/D-Bus library. (%dbus-query-timeout, sleep*): New variables. (%current-dbus-connection): New parameter. (initialize-dbus-connection!, argument->signature-type) (call-dbus-method): New procedures. (dbus-available-services): Adjust accordingly. * gnu/local.mk (GNU_SYSTEM_MODULES): Register new module. * gnu/packages/glib.scm (dbus-for-jami): New variable. * gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to dbus-for-jami. (jami-dbus-session-activation): Write a D-Bus daemon configuration file at '/var/run/jami/session-local.conf'. (jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers as extensions. Adjust imported modules. Remove no longer used parameters. <jami-dbus-session>: Use a PID file, avoiding the need for the manual synchronization. <jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using 'jami-service-available?' instead of 'dbus-service-available?'. * gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use 'jami-service-available?' to determine if the service is started rather than the now problematic Shepherd's 'start-service'.
2022-05-30 03:46:35 +00:00
(with-extensions (list guile-packrat ;used by guile-ac-d-bus
guile-ac-d-bus
;; Fibers is needed to provide the non-blocking
;; variant of the 'sleep' procedure.
guile-fibers)
(with-imported-modules (source-module-closure
'((gnu build marionette)
(gnu build dbus-service)
(gnu build jami-service)))
#~(begin
(use-modules (rnrs base)
(srfi srfi-11)
(srfi srfi-64)
(gnu build marionette)
(gnu build dbus-service)
(gnu build jami-service))
(setenv "DBUS_SESSION_BUS_ADDRESS" "unix:path=/var/run/jami/bus")
(define marionette
(make-marionette (list #$vm)))
(test-runner-current (system-test-runner #$output))
(test-begin "jami")
(test-assert "service is running"
(marionette-eval
'(begin
(use-modules (gnu build jami-service))
(jami-service-available?))
marionette))
(test-assert "service can be stopped"
(marionette-eval
'(begin
(use-modules (gnu build jami-service)
(gnu services herd)
(rnrs base))
(assert (jami-service-available?))
(stop-service 'jami)
(with-retries 20 1 (not (jami-service-available?))))
marionette))
(test-assert "service can be restarted"
(marionette-eval
'(begin
(use-modules (gnu build dbus-service)
(gnu build jami-service)
(gnu services herd)
(rnrs base) )
;; Start the service.
(start-service 'jami)
(with-retries 20 1 (jami-service-available?))
;; Restart the service.
(restart-service 'jami)
(with-retries 20 1 (jami-service-available?)))
marionette))
(unless #$provisioning? (test-skip 1))
(test-assert "jami accounts provisioning, account present"
(marionette-eval
'(begin
(use-modules (gnu build dbus-service)
(gnu services herd)
(rnrs base))
;; Accounts take some time to appear after being added.
(with-retries 20 1
services: jami: Modernize to adjust to Shepherd 0.9+ changes. This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami' and 'jami-provisioning' system tests to pass again. In version 0.9.0, Shepherd constructors are now run concurrently, via cooperative scheduling (Guile Fibers). The Jami service previously relied on blocking sleeps while polling for D-Bus services to become ready after forking a process; this wouldn't work anymore since while blocking the service process wouldn't be given the chance to finish starting. The new reliance on Fibers in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant that it wouldn't work outside of Shepherd anymore. Finally, the 'start-service' Shepherd procedure used in the test suite would cause the Jami daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0). To fix/simplify these problems, this change does the following: 1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify things, such as avoiding the need to fork 'dbus-send' processes. 2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries' waiting syntax. 3. A 'dbus' package variant is used to adjust the session bus configuration, tailoring it for the use case at hand. 4. Avoid start-service in the tests, preferring 'jami-service-available?' for now. * gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes) (deserialize-item, serialize-boolean, dbus-dict->alist) (dbus-array->list, parse-account-ids, parse-account-details) (parse-contacts): Delete procedures. (%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group) (%send-dbus-debug): Delete parameters. (jami-service-running?): New procedure. (send-dbus/configuration-manager): Rename to... (call-configuration-manager-method): ... this. Turn METHOD into a positional argument. Turn ARGUMENTS into an optional argument. Invoke `call-dbus-method' instead of `send-dbus', adjusting callers accordingly. (get-account-ids, id->account-details, id->account-details) (id->volatile-account-details, username->id, add-account remove-account) (username->contacts, remove-contact, add-contact, set-account-details) (set-all-moderators, username->all-moderators?, username->moderators) (set-moderator): Adjust accordingly. (with-retries, send-dbus, dbus-available-services) (dbus-service-available?): Move to ... * gnu/build/dbus-service.scm: ... this new module. (send-dbus): Rewrite to use the Guile AC/D-Bus library. (%dbus-query-timeout, sleep*): New variables. (%current-dbus-connection): New parameter. (initialize-dbus-connection!, argument->signature-type) (call-dbus-method): New procedures. (dbus-available-services): Adjust accordingly. * gnu/local.mk (GNU_SYSTEM_MODULES): Register new module. * gnu/packages/glib.scm (dbus-for-jami): New variable. * gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to dbus-for-jami. (jami-dbus-session-activation): Write a D-Bus daemon configuration file at '/var/run/jami/session-local.conf'. (jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers as extensions. Adjust imported modules. Remove no longer used parameters. <jami-dbus-session>: Use a PID file, avoiding the need for the manual synchronization. <jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using 'jami-service-available?' instead of 'dbus-service-available?'. * gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use 'jami-service-available?' to determine if the service is started rather than the now problematic Shepherd's 'start-service'.
2022-05-30 03:46:35 +00:00
(with-shepherd-action 'jami ('list-accounts) results
(let ((account (assoc-ref (car results) #$username)))
(assert (string=? #$username
(assoc-ref account
"Account.username")))))))
marionette))
(unless #$(and provisioning? (not partial?)) (test-skip 1))
services: jami: Modernize to adjust to Shepherd 0.9+ changes. This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami' and 'jami-provisioning' system tests to pass again. In version 0.9.0, Shepherd constructors are now run concurrently, via cooperative scheduling (Guile Fibers). The Jami service previously relied on blocking sleeps while polling for D-Bus services to become ready after forking a process; this wouldn't work anymore since while blocking the service process wouldn't be given the chance to finish starting. The new reliance on Fibers in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant that it wouldn't work outside of Shepherd anymore. Finally, the 'start-service' Shepherd procedure used in the test suite would cause the Jami daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0). To fix/simplify these problems, this change does the following: 1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify things, such as avoiding the need to fork 'dbus-send' processes. 2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries' waiting syntax. 3. A 'dbus' package variant is used to adjust the session bus configuration, tailoring it for the use case at hand. 4. Avoid start-service in the tests, preferring 'jami-service-available?' for now. * gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes) (deserialize-item, serialize-boolean, dbus-dict->alist) (dbus-array->list, parse-account-ids, parse-account-details) (parse-contacts): Delete procedures. (%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group) (%send-dbus-debug): Delete parameters. (jami-service-running?): New procedure. (send-dbus/configuration-manager): Rename to... (call-configuration-manager-method): ... this. Turn METHOD into a positional argument. Turn ARGUMENTS into an optional argument. Invoke `call-dbus-method' instead of `send-dbus', adjusting callers accordingly. (get-account-ids, id->account-details, id->account-details) (id->volatile-account-details, username->id, add-account remove-account) (username->contacts, remove-contact, add-contact, set-account-details) (set-all-moderators, username->all-moderators?, username->moderators) (set-moderator): Adjust accordingly. (with-retries, send-dbus, dbus-available-services) (dbus-service-available?): Move to ... * gnu/build/dbus-service.scm: ... this new module. (send-dbus): Rewrite to use the Guile AC/D-Bus library. (%dbus-query-timeout, sleep*): New variables. (%current-dbus-connection): New parameter. (initialize-dbus-connection!, argument->signature-type) (call-dbus-method): New procedures. (dbus-available-services): Adjust accordingly. * gnu/local.mk (GNU_SYSTEM_MODULES): Register new module. * gnu/packages/glib.scm (dbus-for-jami): New variable. * gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to dbus-for-jami. (jami-dbus-session-activation): Write a D-Bus daemon configuration file at '/var/run/jami/session-local.conf'. (jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers as extensions. Adjust imported modules. Remove no longer used parameters. <jami-dbus-session>: Use a PID file, avoiding the need for the manual synchronization. <jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using 'jami-service-available?' instead of 'dbus-service-available?'. * gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use 'jami-service-available?' to determine if the service is started rather than the now problematic Shepherd's 'start-service'.
2022-05-30 03:46:35 +00:00
(test-assert "jami accounts provisioning, allowed-contacts"
(marionette-eval
'(begin
(use-modules (gnu services herd)
(rnrs base)
(srfi srfi-1))
;; Public mode is disabled.
(with-shepherd-action 'jami ('list-account-details)
results
(let ((account (assoc-ref (car results) #$username)))
services: jami: Modernize to adjust to Shepherd 0.9+ changes. This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami' and 'jami-provisioning' system tests to pass again. In version 0.9.0, Shepherd constructors are now run concurrently, via cooperative scheduling (Guile Fibers). The Jami service previously relied on blocking sleeps while polling for D-Bus services to become ready after forking a process; this wouldn't work anymore since while blocking the service process wouldn't be given the chance to finish starting. The new reliance on Fibers in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant that it wouldn't work outside of Shepherd anymore. Finally, the 'start-service' Shepherd procedure used in the test suite would cause the Jami daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0). To fix/simplify these problems, this change does the following: 1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify things, such as avoiding the need to fork 'dbus-send' processes. 2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries' waiting syntax. 3. A 'dbus' package variant is used to adjust the session bus configuration, tailoring it for the use case at hand. 4. Avoid start-service in the tests, preferring 'jami-service-available?' for now. * gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes) (deserialize-item, serialize-boolean, dbus-dict->alist) (dbus-array->list, parse-account-ids, parse-account-details) (parse-contacts): Delete procedures. (%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group) (%send-dbus-debug): Delete parameters. (jami-service-running?): New procedure. (send-dbus/configuration-manager): Rename to... (call-configuration-manager-method): ... this. Turn METHOD into a positional argument. Turn ARGUMENTS into an optional argument. Invoke `call-dbus-method' instead of `send-dbus', adjusting callers accordingly. (get-account-ids, id->account-details, id->account-details) (id->volatile-account-details, username->id, add-account remove-account) (username->contacts, remove-contact, add-contact, set-account-details) (set-all-moderators, username->all-moderators?, username->moderators) (set-moderator): Adjust accordingly. (with-retries, send-dbus, dbus-available-services) (dbus-service-available?): Move to ... * gnu/build/dbus-service.scm: ... this new module. (send-dbus): Rewrite to use the Guile AC/D-Bus library. (%dbus-query-timeout, sleep*): New variables. (%current-dbus-connection): New parameter. (initialize-dbus-connection!, argument->signature-type) (call-dbus-method): New procedures. (dbus-available-services): Adjust accordingly. * gnu/local.mk (GNU_SYSTEM_MODULES): Register new module. * gnu/packages/glib.scm (dbus-for-jami): New variable. * gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to dbus-for-jami. (jami-dbus-session-activation): Write a D-Bus daemon configuration file at '/var/run/jami/session-local.conf'. (jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers as extensions. Adjust imported modules. Remove no longer used parameters. <jami-dbus-session>: Use a PID file, avoiding the need for the manual synchronization. <jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using 'jami-service-available?' instead of 'dbus-service-available?'. * gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use 'jami-service-available?' to determine if the service is started rather than the now problematic Shepherd's 'start-service'.
2022-05-30 03:46:35 +00:00
(assert (string=? "false"
(assoc-ref account
services: jami: Modernize to adjust to Shepherd 0.9+ changes. This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami' and 'jami-provisioning' system tests to pass again. In version 0.9.0, Shepherd constructors are now run concurrently, via cooperative scheduling (Guile Fibers). The Jami service previously relied on blocking sleeps while polling for D-Bus services to become ready after forking a process; this wouldn't work anymore since while blocking the service process wouldn't be given the chance to finish starting. The new reliance on Fibers in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant that it wouldn't work outside of Shepherd anymore. Finally, the 'start-service' Shepherd procedure used in the test suite would cause the Jami daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0). To fix/simplify these problems, this change does the following: 1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify things, such as avoiding the need to fork 'dbus-send' processes. 2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries' waiting syntax. 3. A 'dbus' package variant is used to adjust the session bus configuration, tailoring it for the use case at hand. 4. Avoid start-service in the tests, preferring 'jami-service-available?' for now. * gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes) (deserialize-item, serialize-boolean, dbus-dict->alist) (dbus-array->list, parse-account-ids, parse-account-details) (parse-contacts): Delete procedures. (%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group) (%send-dbus-debug): Delete parameters. (jami-service-running?): New procedure. (send-dbus/configuration-manager): Rename to... (call-configuration-manager-method): ... this. Turn METHOD into a positional argument. Turn ARGUMENTS into an optional argument. Invoke `call-dbus-method' instead of `send-dbus', adjusting callers accordingly. (get-account-ids, id->account-details, id->account-details) (id->volatile-account-details, username->id, add-account remove-account) (username->contacts, remove-contact, add-contact, set-account-details) (set-all-moderators, username->all-moderators?, username->moderators) (set-moderator): Adjust accordingly. (with-retries, send-dbus, dbus-available-services) (dbus-service-available?): Move to ... * gnu/build/dbus-service.scm: ... this new module. (send-dbus): Rewrite to use the Guile AC/D-Bus library. (%dbus-query-timeout, sleep*): New variables. (%current-dbus-connection): New parameter. (initialize-dbus-connection!, argument->signature-type) (call-dbus-method): New procedures. (dbus-available-services): Adjust accordingly. * gnu/local.mk (GNU_SYSTEM_MODULES): Register new module. * gnu/packages/glib.scm (dbus-for-jami): New variable. * gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to dbus-for-jami. (jami-dbus-session-activation): Write a D-Bus daemon configuration file at '/var/run/jami/session-local.conf'. (jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers as extensions. Adjust imported modules. Remove no longer used parameters. <jami-dbus-session>: Use a PID file, avoiding the need for the manual synchronization. <jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using 'jami-service-available?' instead of 'dbus-service-available?'. * gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use 'jami-service-available?' to determine if the service is started rather than the now problematic Shepherd's 'start-service'.
2022-05-30 03:46:35 +00:00
"DHT.PublicInCalls")))))
;; Allowed contacts match those declared in the configuration.
(with-shepherd-action 'jami ('list-contacts) results
(let ((contacts (assoc-ref (car results) #$username)))
(assert (lset= string-ci=? contacts '#$%allowed-contacts)))))
marionette))
(unless #$(and provisioning? (not partial?)) (test-skip 1))
services: jami: Modernize to adjust to Shepherd 0.9+ changes. This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami' and 'jami-provisioning' system tests to pass again. In version 0.9.0, Shepherd constructors are now run concurrently, via cooperative scheduling (Guile Fibers). The Jami service previously relied on blocking sleeps while polling for D-Bus services to become ready after forking a process; this wouldn't work anymore since while blocking the service process wouldn't be given the chance to finish starting. The new reliance on Fibers in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant that it wouldn't work outside of Shepherd anymore. Finally, the 'start-service' Shepherd procedure used in the test suite would cause the Jami daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0). To fix/simplify these problems, this change does the following: 1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify things, such as avoiding the need to fork 'dbus-send' processes. 2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries' waiting syntax. 3. A 'dbus' package variant is used to adjust the session bus configuration, tailoring it for the use case at hand. 4. Avoid start-service in the tests, preferring 'jami-service-available?' for now. * gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes) (deserialize-item, serialize-boolean, dbus-dict->alist) (dbus-array->list, parse-account-ids, parse-account-details) (parse-contacts): Delete procedures. (%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group) (%send-dbus-debug): Delete parameters. (jami-service-running?): New procedure. (send-dbus/configuration-manager): Rename to... (call-configuration-manager-method): ... this. Turn METHOD into a positional argument. Turn ARGUMENTS into an optional argument. Invoke `call-dbus-method' instead of `send-dbus', adjusting callers accordingly. (get-account-ids, id->account-details, id->account-details) (id->volatile-account-details, username->id, add-account remove-account) (username->contacts, remove-contact, add-contact, set-account-details) (set-all-moderators, username->all-moderators?, username->moderators) (set-moderator): Adjust accordingly. (with-retries, send-dbus, dbus-available-services) (dbus-service-available?): Move to ... * gnu/build/dbus-service.scm: ... this new module. (send-dbus): Rewrite to use the Guile AC/D-Bus library. (%dbus-query-timeout, sleep*): New variables. (%current-dbus-connection): New parameter. (initialize-dbus-connection!, argument->signature-type) (call-dbus-method): New procedures. (dbus-available-services): Adjust accordingly. * gnu/local.mk (GNU_SYSTEM_MODULES): Register new module. * gnu/packages/glib.scm (dbus-for-jami): New variable. * gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to dbus-for-jami. (jami-dbus-session-activation): Write a D-Bus daemon configuration file at '/var/run/jami/session-local.conf'. (jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers as extensions. Adjust imported modules. Remove no longer used parameters. <jami-dbus-session>: Use a PID file, avoiding the need for the manual synchronization. <jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using 'jami-service-available?' instead of 'dbus-service-available?'. * gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use 'jami-service-available?' to determine if the service is started rather than the now problematic Shepherd's 'start-service'.
2022-05-30 03:46:35 +00:00
(test-assert "jami accounts provisioning, moderators"
(marionette-eval
'(begin
(use-modules (gnu services herd)
(rnrs base)
(srfi srfi-1))
;; Moderators match those declared in the configuration.
(with-shepherd-action 'jami ('list-moderators) results
(let ((moderators (assoc-ref (car results) #$username)))
(assert (lset= string-ci=? moderators '#$%moderators))))
;; Moderators can be added via the Shepherd action.
(with-shepherd-action 'jami
('add-moderator "cccccccccccccccccccccccccccccccccccccccc"
#$username) results
(let ((moderators (car results)))
(assert (lset= string-ci=? moderators
(cons "cccccccccccccccccccccccccccccccccccccccc"
'#$%moderators))))))
marionette))
(unless #$provisioning? (test-skip 1))
(test-assert "jami service actions, ban/unban contacts"
(marionette-eval
'(begin
(use-modules (gnu services herd)
(ice-9 match)
services: jami: Modernize to adjust to Shepherd 0.9+ changes. This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami' and 'jami-provisioning' system tests to pass again. In version 0.9.0, Shepherd constructors are now run concurrently, via cooperative scheduling (Guile Fibers). The Jami service previously relied on blocking sleeps while polling for D-Bus services to become ready after forking a process; this wouldn't work anymore since while blocking the service process wouldn't be given the chance to finish starting. The new reliance on Fibers in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant that it wouldn't work outside of Shepherd anymore. Finally, the 'start-service' Shepherd procedure used in the test suite would cause the Jami daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0). To fix/simplify these problems, this change does the following: 1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify things, such as avoiding the need to fork 'dbus-send' processes. 2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries' waiting syntax. 3. A 'dbus' package variant is used to adjust the session bus configuration, tailoring it for the use case at hand. 4. Avoid start-service in the tests, preferring 'jami-service-available?' for now. * gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes) (deserialize-item, serialize-boolean, dbus-dict->alist) (dbus-array->list, parse-account-ids, parse-account-details) (parse-contacts): Delete procedures. (%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group) (%send-dbus-debug): Delete parameters. (jami-service-running?): New procedure. (send-dbus/configuration-manager): Rename to... (call-configuration-manager-method): ... this. Turn METHOD into a positional argument. Turn ARGUMENTS into an optional argument. Invoke `call-dbus-method' instead of `send-dbus', adjusting callers accordingly. (get-account-ids, id->account-details, id->account-details) (id->volatile-account-details, username->id, add-account remove-account) (username->contacts, remove-contact, add-contact, set-account-details) (set-all-moderators, username->all-moderators?, username->moderators) (set-moderator): Adjust accordingly. (with-retries, send-dbus, dbus-available-services) (dbus-service-available?): Move to ... * gnu/build/dbus-service.scm: ... this new module. (send-dbus): Rewrite to use the Guile AC/D-Bus library. (%dbus-query-timeout, sleep*): New variables. (%current-dbus-connection): New parameter. (initialize-dbus-connection!, argument->signature-type) (call-dbus-method): New procedures. (dbus-available-services): Adjust accordingly. * gnu/local.mk (GNU_SYSTEM_MODULES): Register new module. * gnu/packages/glib.scm (dbus-for-jami): New variable. * gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to dbus-for-jami. (jami-dbus-session-activation): Write a D-Bus daemon configuration file at '/var/run/jami/session-local.conf'. (jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers as extensions. Adjust imported modules. Remove no longer used parameters. <jami-dbus-session>: Use a PID file, avoiding the need for the manual synchronization. <jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using 'jami-service-available?' instead of 'dbus-service-available?'. * gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use 'jami-service-available?' to determine if the service is started rather than the now problematic Shepherd's 'start-service'.
2022-05-30 03:46:35 +00:00
(rnrs base)
(srfi srfi-1))
;; Globally ban a contact.
(with-shepherd-action 'jami
('ban-contact "1dbcb0f5f37324228235564b79f2b9737e9a008f") _
(with-shepherd-action 'jami ('list-banned-contacts) results
(every (match-lambda
((username . banned-contacts)
(member "1dbcb0f5f37324228235564b79f2b9737e9a008f"
banned-contacts)))
(car results))))
;; Ban a contact for a single account.
(with-shepherd-action 'jami
('ban-contact "dddddddddddddddddddddddddddddddddddddddd"
#$username) _
(with-shepherd-action 'jami ('list-banned-contacts) results
(every (match-lambda
((username . banned-contacts)
(let ((found? (member "dddddddddddddddddddddddddddddddddddddddd"
banned-contacts)))
(if (string=? #$username username)
found?
(not found?)))))
(car results)))))
marionette))
(unless #$provisioning? (test-skip 1))
(test-assert "jami service actions, enable/disable accounts"
(marionette-eval
'(begin
(use-modules (gnu services herd)
(rnrs base))
(with-shepherd-action 'jami
('disable-account #$username) _
(with-shepherd-action 'jami ('list-accounts) results
(let ((account (assoc-ref (car results) #$username)))
(assert (string= "false"
(assoc-ref account "Account.enable"))))))
(with-shepherd-action 'jami
('enable-account #$username) _
(with-shepherd-action 'jami ('list-accounts) results
(let ((account (assoc-ref (car results) #$username)))
(assert (string= "true"
(assoc-ref account "Account.enable")))))))
marionette))
(unless #$provisioning? (test-skip 1))
(test-assert "jami account parameters"
(marionette-eval
'(begin
(use-modules (gnu services herd)
(rnrs base)
(srfi srfi-1))
(with-shepherd-action 'jami ('list-account-details) results
(let ((account-details (assoc-ref (car results)
#$username)))
(assert (lset<=
equal?
'(("Account.hostname" .
"bootstrap.me;fallback.another.host")
("Account.peerDiscovery" . "false")
("Account.rendezVous" . "true")
("RingNS.uri" . "https://my.name.server"))
account-details)))))
marionette))
(test-end)))))
(gexp->derivation (if provisioning?
(if partial?
"jami-provisioning-partial-test"
"jami-provisioning-test")
"jami-test")
test))
(define %test-jami
(system-test
(name "jami")
(description "Basic tests for the jami service.")
(value (run-jami-test))))
(define %test-jami-provisioning
(system-test
(name "jami-provisioning")
(description "Provisioning test for the jami service.")
(value (run-jami-test #:provisioning? #t))))
;;; Thi test verifies that <jami-account> values can be left unspecified
;;; without causing any issue (see: https://issues.guix.gnu.org/56799).
(define %test-jami-provisioning-partial
(system-test
(name "jami-provisioning-partial")
(description "Provisioning test for the jami service, when some of the
'maybe' fields aren't provided (such that their value end up being
*unspecified*.")
(value (run-jami-test #:provisioning? #t #:partial? #t))))